<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0">
<context>
    <name>@default</name>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <source>Please select two columns for this operation!</source>
        <translation type="obsolete">Sélectionnez 2 colonnes pour cette opération !</translation>
    </message>
    <message>
        <source>Could not allocate memory, operation aborted!</source>
        <translation type="obsolete">Allocation mémoire impossible, Opération annulée !</translation>
    </message>
    <message>
        <source>Error in GSL forward FFT operation!</source>
        <translation type="obsolete">Erreur de la librarie GSL sur l&apos;opération FFT !</translation>
    </message>
    <message>
        <source>Please select a Y column to plot!</source>
        <translation type="obsolete">Sélectionnez une colonne Y à tracer !</translation>
    </message>
    <message>
        <source>Please set a default X column for this table, first!</source>
        <translation type="obsolete">Sélectionnez d&apos;abord la colonne X par défaut pour cette table !</translation>
    </message>
    <message>
        <source>Please select a column to plot!</source>
        <translation type="obsolete">Sélectionnez une colonne à tracer !</translation>
    </message>
    <message>
        <source>Please select four columns for this operation!</source>
        <translation type="obsolete">Sélectionnez quatre colonnes pour cette opération !</translation>
    </message>
    <message>
        <source>You need at least two columns for this operation!</source>
        <translation type="obsolete">Vous avez besoin d&apos;au moins deux colonnes pour cette opération !</translation>
    </message>
    <message>
        <source>Please select a Z column for this operation!</source>
        <translation type="obsolete">Sélectionnez une colonne Z pour cette opération !</translation>
    </message>
    <message>
        <source>You need to define a X column first!</source>
        <translation type="obsolete">Vous devez d&apos;abord définir une colonne X !</translation>
    </message>
    <message>
        <source>You need to define a Y column first!</source>
        <translation type="obsolete">Vous devez d&apos;abord définir une colonne Y !</translation>
    </message>
    <message>
        <source>QtiPlot - ASCII Export Error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;exportation ASCII</translation>
    </message>
    <message>
        <source>Please select two columns for this operation:
 the first represents the signal and the second the response function!</source>
        <translation type="obsolete">Sélectionnez 2 colonnes pour cette opération :
La première représente le signal et la seconde, la réponse de la fonction !</translation>
    </message>
    <message>
        <source>The response dataset &apos;%1&apos; must be less then half the size of the signal dataset &apos;%2&apos;!</source>
        <translation type="obsolete">Les données de la réponse &apos;%1&apos; doivent être de moitié inférieure à la taille des données du signal &apos;%2&apos; !</translation>
    </message>
    <message>
        <source>The response dataset &apos;%1&apos; must contain an odd number of points!</source>
        <translation type="obsolete">Les données de la réponse &apos;%1&apos; doivent contenir un nombre de points impaires !</translation>
    </message>
    <message>
        <source>Frequency</source>
        <translation type="obsolete">Fréquence</translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="obsolete">Temps</translation>
    </message>
    <message>
        <source>Real</source>
        <translation type="obsolete">Réel</translation>
    </message>
    <message>
        <source>Imaginary</source>
        <translation type="obsolete">Imaginaire</translation>
    </message>
    <message>
        <source>Amplitude</source>
        <translation type="obsolete">Amplitude</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="obsolete">Angle</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>QtiPlot - untitled</source>
        <translation type="obsolete">QtiPlot - Sans nom</translation>
    </message>
    <message>
        <source>&lt;b&gt; %1 &lt;/b&gt;: Wrong locale option or no translation available!</source>
        <translation type="obsolete">&lt;b&gt; %1 &lt;/b&gt; : Langue inconnue !</translation>
    </message>
    <message>
        <source>&lt;b&gt; %1 &lt;/b&gt;: Unknown command line option or the file doesn&apos;t exist!</source>
        <translation type="obsolete">&lt;b&gt; %1 &lt;/b&gt; : Commande inconnue ou le fichier n&apos;existe pas !</translation>
    </message>
    <message>
        <source>QtiPlot project</source>
        <translation type="obsolete">Projet QtiPlot</translation>
    </message>
    <message>
        <source>Compressed QtiPlot project</source>
        <translation type="obsolete">Projet QtiPlot compressé</translation>
    </message>
    <message>
        <source>QtiPlot - Open Project</source>
        <translation type="obsolete">QtiPlot - Ouvrir un projet</translation>
    </message>
    <message>
        <source>QtiPlot - File openning error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;ouverture du fichier</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; doesn&apos;t exist!</source>
        <translation type="obsolete">Le fichier &lt;b&gt; %1 &lt;/b&gt; n&apos;existe pas !</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; is not a QtiPlot project file!</source>
        <translation type="obsolete">Le fichier &lt;b&gt;%1&lt;/b&gt; n&apos;est pas un fichier projet QtiPlot !</translation>
    </message>
    <message>
        <source>QtiPlot - File Backup Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de la sauvegarde automatique</translation>
    </message>
    <message>
        <source>Cannot make a backup copy of &lt;b&gt;%1&lt;/b&gt; (to %2).&lt;br&gt;If you ignore this, you run the risk of &lt;b&gt;data loss&lt;/b&gt;.</source>
        <translation type="obsolete">Impossible de faire une sauvegarde de &lt;b&gt;%1&lt;/b&gt; (vers %2).&lt;br&gt;Si vous ignorez ce message, vous prenez le risque de &lt;b&gt;perdre des données&lt;/b&gt;.</translation>
    </message>
    <message>
        <source>QtiPlot - File Save Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de la sauvegarde du fichier</translation>
    </message>
    <message>
        <source>The file: &lt;br&gt;&lt;b&gt;%1&lt;/b&gt; is opened in read-only mode</source>
        <translation type="obsolete">Le fichier &lt;br&gt;&lt;b&gt;%1&lt;/b&gt; est ouvert en lecture seule</translation>
    </message>
    <message>
        <source>Save Project As</source>
        <translation type="obsolete">Enregistrer le projet sous</translation>
    </message>
    <message>
        <source>QtiPlot -- Overwrite File? </source>
        <translation type="obsolete">QtiPlot -- Ecraser le fichier ? </translation>
    </message>
    <message>
        <source>A file called: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;already exists.
Do you want to overwrite it?</source>
        <translation type="obsolete">Un fichier nommé &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;existe déjà.
Voulez-vous l&apos;écraser ?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="obsolete">Oui</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;Non</translation>
    </message>
    <message>
        <source>&amp;Find...</source>
        <translation type="obsolete">Chercher...</translation>
    </message>
    <message>
        <source>App&amp;end Project...</source>
        <translation type="obsolete">Ajout&amp;er un projet...</translation>
    </message>
    <message>
        <source>Save &amp;As Project...</source>
        <translation type="obsolete">S&amp;auvegarder comme projet...</translation>
    </message>
    <message>
        <source>Save Project &amp;As...</source>
        <translation type="obsolete">E&amp;nregistrer le projet sous...</translation>
    </message>
    <message>
        <source>&amp;Show All Windows</source>
        <translation type="obsolete">Montrer toutes les fenêtres</translation>
    </message>
    <message>
        <source>&amp;Hide All Windows</source>
        <translation type="obsolete">Cac&amp;her toutes les fenêtres</translation>
    </message>
    <message>
        <source>&amp;Delete Folder</source>
        <translation type="obsolete">Supprimer le dossier</translation>
    </message>
    <message>
        <source>&amp;Rename</source>
        <translation type="obsolete">&amp;Renommer</translation>
    </message>
    <message>
        <source>New &amp;Window</source>
        <translation type="obsolete">Fenêtre</translation>
    </message>
    <message>
        <source>New F&amp;older</source>
        <translation type="obsolete">Dossier</translation>
    </message>
    <message>
        <source>&amp;None</source>
        <translation type="obsolete">&amp;Non</translation>
    </message>
    <message>
        <source>&amp;Windows in Active Folder</source>
        <translation type="obsolete">Dans le dossier actif</translation>
    </message>
    <message>
        <source>Windows in &amp;Active Folder &amp;&amp; Subfolders</source>
        <translation type="obsolete">Dans le dossier actif et les sous-dossiers</translation>
    </message>
    <message>
        <source>&amp;View Windows</source>
        <translation type="obsolete">Afficher les fenêtres</translation>
    </message>
    <message>
        <source>&amp;Properties...</source>
        <translation type="obsolete">&amp;Propriétés...</translation>
    </message>
    <message>
        <source>Hidden</source>
        <translation type="obsolete">Caché</translation>
    </message>
    <message>
        <source>Please enter a valid name!</source>
        <translation type="obsolete">Veuillez donner un nom valide !</translation>
    </message>
    <message>
        <source>Name already exists!</source>
        <translation type="obsolete">Ce nom existe déjà !</translation>
    </message>
    <message>
        <source>Please choose another name!</source>
        <translation type="obsolete">Choisissez un autre nom !</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">Type</translation>
    </message>
    <message>
        <source>Project</source>
        <translation type="obsolete">Projet</translation>
    </message>
    <message>
        <source>Path</source>
        <translation type="obsolete">Chemin</translation>
    </message>
    <message>
        <source>Size</source>
        <translation type="obsolete">Taille</translation>
    </message>
    <message>
        <source>bytes</source>
        <translation type="obsolete">octets</translation>
    </message>
    <message>
        <source>Contents</source>
        <translation type="obsolete">Contenu</translation>
    </message>
    <message>
        <source>Windows</source>
        <translation type="obsolete">Fenêtres</translation>
    </message>
    <message>
        <source>Folders</source>
        <translation type="obsolete">Dossiers</translation>
    </message>
    <message>
        <source>Created</source>
        <translation type="obsolete">Créé</translation>
    </message>
    <message>
        <source>Modified</source>
        <translation type="obsolete">Modifié</translation>
    </message>
    <message>
        <source>Properties</source>
        <translation type="obsolete">Propriétés</translation>
    </message>
    <message>
        <source>Folder</source>
        <translation type="obsolete">Dossier</translation>
    </message>
    <message>
        <source>New Folder</source>
        <translation type="obsolete">Nouveau Dossier</translation>
    </message>
    <message>
        <source>QtiPlot - Delete folder?</source>
        <translation type="obsolete">QtiPlot - Supprimer le dossier ?</translation>
    </message>
    <message>
        <source>Delete folder &apos;%1&apos; and all the windows it contains?</source>
        <translation type="obsolete">Supprimer le dossier &apos;%1&apos; et toutes les fenêtres qu&apos;il contient ?</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="obsolete">Oui</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="obsolete">Non</translation>
    </message>
    <message>
        <source>Matrix</source>
        <translation type="obsolete">Matrice</translation>
    </message>
    <message>
        <source>Table</source>
        <translation type="obsolete">Table</translation>
    </message>
    <message>
        <source>Note</source>
        <translation type="obsolete">Commentaires</translation>
    </message>
    <message>
        <source>Plot</source>
        <translation type="obsolete">Graphe</translation>
    </message>
    <message>
        <source>Plot 3D</source>
        <translation type="obsolete">Graphe 3D</translation>
    </message>
    <message>
        <source>Label</source>
        <translation type="obsolete">Etiquette</translation>
    </message>
    <message>
        <source>Status</source>
        <translation type="obsolete">Etat</translation>
    </message>
    <message>
        <source>QtiPlot - No match found</source>
        <translation type="obsolete">QtiPlot - Pas de correspondance</translation>
    </message>
    <message>
        <source>Sorry, no match found for string: &apos;%1&apos;</source>
        <translation type="obsolete">Désolé, &apos;%1&apos; introuvable</translation>
    </message>
    <message>
        <source>Cannot move an object to itself!</source>
        <translation type="obsolete">Impossible de déplacer un objet vers lui-même !</translation>
    </message>
    <message>
        <source>Cannot move a parent folder into a child folder!</source>
        <translation type="obsolete">Ne peux pas déplacer un dossier père vers un dossier fils !</translation>
    </message>
    <message>
        <source>The destination folder already contains a folder called &apos;%1&apos;! Folder skipped!</source>
        <translation type="obsolete">Le dossier de destination contient déjà un dossier &apos;%1&apos; !</translation>
    </message>
    <message>
        <source>Rows will be deleted from the table!</source>
        <translation type="obsolete">Les rangées seront effacées de la table !</translation>
    </message>
    <message>
        <source>Do you really want to continue?</source>
        <translation type="obsolete">Voulez-vous vraiment continuer ?</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Annuler</translation>
    </message>
    <message>
        <source>Columns will be deleted from the table!</source>
        <translation type="obsolete">Les colonnes seront effacées de la table !</translation>
    </message>
    <message>
        <source>Origin project</source>
        <translation type="obsolete">Projet OriginLab</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; is not a QtiPlot or Origin project file!</source>
        <translation type="obsolete">Le fichier &lt;b&gt;%1&lt;/b&gt; n&apos;est pas un fichier QtiPlot ou un projet Origin !</translation>
    </message>
    <message>
        <source>Skipped Moving Folder</source>
        <translation type="obsolete">Dossier inchangé</translation>
    </message>
    <message>
        <source>QtiPlot - HTTP Get Version File</source>
        <translation type="obsolete">QtiPlot - Recherche de mise à jour par le WEB</translation>
    </message>
    <message>
        <source>Cannot write file %1
%2.</source>
        <translation type="obsolete">Ne peut pas écire le fichier %1
%2.</translation>
    </message>
    <message>
        <source>Error while fetching version file with HTTP: %1.</source>
        <translation type="obsolete">Erreur lors de la recherche de la version du fichier par le WEB : %1.</translation>
    </message>
    <message>
        <source>QtiPlot - Updates Available</source>
        <translation type="obsolete">QtiPlot - Mises à jour disponibles</translation>
    </message>
    <message>
        <source>There is a newer version of QtiPlot (%1) available for download. Would you like to download it?</source>
        <translation type="obsolete">Une nouvelle version de QtiPlot (%1) est disponible. Voulez-vous la télécharger ?</translation>
    </message>
    <message>
        <source>QtiPlot - No Updates Available</source>
        <translation type="obsolete">QtiPlot - Aucune mise à jour disponible</translation>
    </message>
    <message>
        <source>No updates available. Your current version %1 is the last version available!</source>
        <translation type="obsolete">Aucune mise à jour disponible. Votre version %1 est la dernière disponible !</translation>
    </message>
    <message>
        <source>Qtiplot - Reading file...</source>
        <translation type="obsolete">Qtiplot - Lecture du fichier...</translation>
    </message>
    <message>
        <source>Graph</source>
        <translation type="obsolete">Graphe</translation>
    </message>
    <message>
        <source>Graph 3D</source>
        <translation type="obsolete">Graphe 3D</translation>
    </message>
    <message>
        <source>This will clear the contents of all the data associated with the table. Are you sure?</source>
        <translation type="obsolete">Toutes les données de la table seront effacées. Etes vous sûr ?</translation>
    </message>
    <message>
        <source>QtiPlot - Enter row number</source>
        <translation type="obsolete">QtiPlot - Entrer le numéro de la rangée</translation>
    </message>
    <message>
        <source>Row</source>
        <translation type="obsolete">Rangée</translation>
    </message>
    <message>
        <source>QtiPlot - Help</source>
        <translation type="obsolete">QtiPlot - Aide</translation>
    </message>
    <message>
        <source>QtiPlot - File opening error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;ouverture du fichier</translation>
    </message>
</context>
<context>
    <name>AbstractAspect</name>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="79"/>
        <source>XML read error: </source>
        <comment>prefix for XML error messages</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="80"/>
        <source> (non-critical)</source>
        <comment>postfix for XML error messages</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="89"/>
        <source>aspect name missing or empty</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="97"/>
        <source>Invalid creation time for &apos;%1&apos;. Using current time.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="118"/>
        <source>%1: add %2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="120"/>
        <location filename="../src/future/core/AbstractAspect.cpp" line="134"/>
        <location filename="../src/future/core/AbstractAspect.cpp" line="165"/>
        <source>Renaming &quot;%1&quot; to &quot;%2&quot; in order to avoid name collision.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="132"/>
        <source>%1: insert %2 at position %3.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="145"/>
        <source>%1: remove %2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="244"/>
        <source>Intended name &quot;%1&quot; diverted to &quot;%2&quot; in order to avoid name collision.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="344"/>
        <source>%1: remove all children.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="163"/>
        <source>%1: move %2 to %3.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AbstractPart</name>
    <message>
        <location filename="../src/future/core/AbstractPart.cpp" line="51"/>
        <source>&amp;Restore</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractPart.cpp" line="56"/>
        <source>Mi&amp;nimize</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractPart.cpp" line="61"/>
        <source>Ma&amp;ximize</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AbstractSimpleFilter</name>
    <message>
        <location filename="../src/future/core/AbstractSimpleFilter.cpp" line="145"/>
        <source>incompatible filter type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractSimpleFilter.cpp" line="164"/>
        <source>unknown element &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractSimpleFilter.cpp" line="171"/>
        <source>no simple filter element found</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ApplicationWindow</name>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="383"/>
        <location filename="../src/ApplicationWindow.cpp" line="672"/>
        <source>File</source>
        <translation>Fichier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="561"/>
        <location filename="../src/ApplicationWindow.cpp" line="670"/>
        <source>Plot</source>
        <translation>Graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11290"/>
        <source>Pointer</source>
        <translation>Pointeur</translation>
    </message>
    <message>
        <source>Zoom</source>
        <translation type="obsolete">Zoom</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11306"/>
        <source>Select data range</source>
        <translation>Sélectionner les données</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11313"/>
        <source>Move data points</source>
        <translation>Déplacer une valeur</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11317"/>
        <source>Remove data points</source>
        <translation>Supprimer une valeur</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11329"/>
        <source>Draw line</source>
        <translation>Tracer une ligne</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="612"/>
        <location filename="../src/ApplicationWindow.cpp" line="669"/>
        <location filename="../src/ApplicationWindow.cpp" line="2462"/>
        <location filename="../src/ApplicationWindow.cpp" line="2474"/>
        <location filename="../src/ApplicationWindow.cpp" line="2681"/>
        <location filename="../src/ApplicationWindow.cpp" line="7124"/>
        <location filename="../src/ApplicationWindow.cpp" line="12958"/>
        <location filename="../src/ApplicationWindow.cpp" line="13002"/>
        <source>Table</source>
        <translation>Table</translation>
    </message>
    <message>
        <source>Data Display</source>
        <translation type="obsolete">Affichage des données</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1038"/>
        <source>&amp;File</source>
        <translation>&amp;Fichier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="677"/>
        <location filename="../src/ApplicationWindow.cpp" line="711"/>
        <source>&amp;New</source>
        <translation>&amp;Nouveau</translation>
    </message>
    <message>
        <source>&amp;Recent projects</source>
        <translation type="obsolete">Projets récents</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="679"/>
        <location filename="../src/ApplicationWindow.cpp" line="736"/>
        <source>&amp;Export Graph</source>
        <translation>&amp;Exporter</translation>
    </message>
    <message>
        <source>&amp;Import ASCII</source>
        <translation type="obsolete">&amp;Importer un fichier ASCII</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1039"/>
        <source>&amp;Edit</source>
        <translation>&amp;Edition</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1040"/>
        <source>&amp;View</source>
        <translation>&amp;Affichage</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1064"/>
        <source>&amp;Graph</source>
        <translation>&amp;Graphique</translation>
    </message>
    <message>
        <source>&amp;Plot3D</source>
        <translation type="obsolete">Gra&amp;phe 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1130"/>
        <location filename="../src/ApplicationWindow.cpp" line="5796"/>
        <source>&amp;Matrix</source>
        <translation>&amp;Matrice</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="681"/>
        <location filename="../src/ApplicationWindow.cpp" line="979"/>
        <source>Special Line/Symb&amp;ol</source>
        <translation>Ligne/Symb&amp;ole spécial</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="682"/>
        <location filename="../src/ApplicationWindow.cpp" line="995"/>
        <source>Statistical &amp;Graphs</source>
        <translation>&amp;Graphes statistiques</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="683"/>
        <location filename="../src/ApplicationWindow.cpp" line="1001"/>
        <source>Pa&amp;nel</source>
        <translation>Pa&amp;nneau</translation>
    </message>
    <message>
        <source>&amp;Plot 2D</source>
        <translation type="obsolete">&amp;Graphes 2D</translation>
    </message>
    <message>
        <source>&amp;Data</source>
        <translation type="obsolete">&amp;Données</translation>
    </message>
    <message>
        <source>Inter&amp;polate</source>
        <translation type="obsolete">Inter&amp;polation</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="689"/>
        <location filename="../src/ApplicationWindow.cpp" line="887"/>
        <location filename="../src/ApplicationWindow.cpp" line="7900"/>
        <location filename="../src/ApplicationWindow.cpp" line="8016"/>
        <source>Fit E&amp;xponential Decay</source>
        <translation>Ajustement décroissance e&amp;xponentielle</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1066"/>
        <location filename="../src/ApplicationWindow.cpp" line="1105"/>
        <source>&amp;Analysis</source>
        <translation>A&amp;nalyse</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1067"/>
        <location filename="../src/ApplicationWindow.cpp" line="1087"/>
        <source>For&amp;mat</source>
        <translation>For&amp;mat</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1151"/>
        <source>&amp;Windows</source>
        <translation>Fenêt&amp;re</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1156"/>
        <location filename="../src/ApplicationWindow.cpp" line="10748"/>
        <location filename="../src/ApplicationWindow.cpp" line="11217"/>
        <source>&amp;Help</source>
        <translation>&amp;Aide</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1693"/>
        <location filename="../src/ApplicationWindow.cpp" line="8272"/>
        <source>&lt;h4&gt;There are no tables available in this project.&lt;/h4&gt;&lt;p&gt;&lt;h4&gt;Please create a table and try again!&lt;/h4&gt;</source>
        <translation>&lt;h4&gt;Il n&apos;y a pas de tables disponibles dans ce projet.&lt;/h4&gt;&lt;p&gt;&lt;h4&gt;Veuillez créer une table et réessayer !&lt;/h4&gt;</translation>
    </message>
    <message>
        <source>QtiPlot - Choose data set</source>
        <translation type="obsolete">QtiPlot - Choisissez une série de données</translation>
    </message>
    <message>
        <source>&lt;h4&gt;There are no matrixes available in this project.&lt;/h4&gt;&lt;p&gt;&lt;h4&gt;Please create a matrix and try again!&lt;/h4&gt;</source>
        <translation type="obsolete">&lt;h4&gt;Il n&apos;y a pas de matrices disponibles dans ce projet.&lt;/h4&gt;&lt;p&gt;&lt;h4&gt;Veuillez créer une matrice et réessayer !&lt;/h4&gt;</translation>
    </message>
    <message>
        <source>QtiPlot - Choose matrix to plot</source>
        <translation type="obsolete">QtiPlot - Choisissez une matrice à tracer</translation>
    </message>
    <message>
        <source>QtiPlot - Import image from file</source>
        <translation type="obsolete">QtiPlot - Importer une image à partir d&apos;un fichier</translation>
    </message>
    <message>
        <source>QtiPlot - Load image from file</source>
        <translation type="obsolete">QtiPlot - Charger une image à partir d&apos;un fichier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1729"/>
        <location filename="../src/ApplicationWindow.cpp" line="1766"/>
        <location filename="../src/ApplicationWindow.cpp" line="2617"/>
        <location filename="../src/ApplicationWindow.cpp" line="2618"/>
        <location filename="../src/ApplicationWindow.cpp" line="9050"/>
        <location filename="../src/ApplicationWindow.cpp" line="12954"/>
        <location filename="../src/ApplicationWindow.cpp" line="12997"/>
        <source>Matrix</source>
        <translation>Matrice</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7515"/>
        <source>Normal</source>
        <translation>Normal</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2826"/>
        <location filename="../src/ApplicationWindow.cpp" line="5189"/>
        <location filename="../src/ApplicationWindow.cpp" line="6002"/>
        <location filename="../src/ApplicationWindow.cpp" line="6069"/>
        <location filename="../src/ApplicationWindow.cpp" line="6114"/>
        <location filename="../src/ApplicationWindow.cpp" line="6537"/>
        <location filename="../src/ApplicationWindow.cpp" line="6594"/>
        <location filename="../src/ApplicationWindow.cpp" line="6625"/>
        <location filename="../src/ApplicationWindow.cpp" line="6644"/>
        <location filename="../src/ApplicationWindow.cpp" line="6685"/>
        <location filename="../src/ApplicationWindow.cpp" line="6713"/>
        <location filename="../src/ApplicationWindow.cpp" line="6751"/>
        <location filename="../src/ApplicationWindow.cpp" line="6775"/>
        <location filename="../src/ApplicationWindow.cpp" line="8360"/>
        <location filename="../src/ApplicationWindow.cpp" line="11652"/>
        <location filename="../src/ApplicationWindow.cpp" line="11687"/>
        <location filename="../src/ApplicationWindow.cpp" line="11732"/>
        <source>&lt;h4&gt;There are no plot layers available in this window.&lt;/h4&gt;&lt;p&gt;&lt;h4&gt;Please add a layer and try again!&lt;/h4&gt;</source>
        <translation>&lt;h4&gt;Il n&apos;y a pas de planche disponible dans cette fenêtre.&lt;/h4&gt;&lt;p&gt;&lt;h4&gt;Veuillez ajouter une planche et réessayer !&lt;/h4&gt;</translation>
    </message>
    <message>
        <source>QtiPlot - Error bars error</source>
        <translation type="obsolete">QtiPlot - Erreur sur les barres d&apos;erreur du graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2870"/>
        <location filename="../src/ApplicationWindow.cpp" line="2917"/>
        <source>This feature is not available for user defined function curves!</source>
        <translation>Cette fonctionnalité n&apos;est pas disponible pour les fonctions définies par l&apos;utilisateur !</translation>
    </message>
    <message>
        <source>QtiPlot - File Open Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;ouverture du fichier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4653"/>
        <source>&lt;h4&gt;There are no plot layers available in this window!&lt;/h4&gt;</source>
        <translation>&lt;h4&gt;Il n&apos;y a pas de planche disponible dans cette fenêtre !&lt;/h4&gt;</translation>
    </message>
    <message>
        <source>QtiPlot - Overwrite File?</source>
        <translation type="obsolete">QtiPlot - Ecraser le fichier?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4807"/>
        <location filename="../src/ApplicationWindow.cpp" line="5417"/>
        <source>A file called: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;already exists. Do you want to overwrite it?</source>
        <translation>Un fichier nommé : &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;existe déjà. Voulez vous écraser ce fichier ?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4808"/>
        <location filename="../src/ApplicationWindow.cpp" line="5418"/>
        <location filename="../src/ApplicationWindow.cpp" line="13328"/>
        <source>&amp;Yes</source>
        <translation>&amp;Oui</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4808"/>
        <location filename="../src/ApplicationWindow.cpp" line="5418"/>
        <location filename="../src/ApplicationWindow.cpp" line="10513"/>
        <location filename="../src/ApplicationWindow.cpp" line="11063"/>
        <source>&amp;All</source>
        <translation>&amp;Tous les graphes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4808"/>
        <location filename="../src/ApplicationWindow.cpp" line="5418"/>
        <location filename="../src/ApplicationWindow.cpp" line="6673"/>
        <location filename="../src/ApplicationWindow.cpp" line="9076"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Export Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;exportation</translation>
    </message>
    <message>
        <source>QtiPlot - File Save Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de la sauvegarde du fichier</translation>
    </message>
    <message>
        <source>QtiPlot -- Overwrite File? </source>
        <translation type="obsolete">QtiPlot -- Ecraser le fichier? </translation>
    </message>
    <message>
        <source>A file called: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;already exists.
Do you want to overwrite it?</source>
        <translation type="obsolete">Un fichier nommé : &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;existe déjà. Voulez-vous l&apos;écraser ?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13328"/>
        <source>&amp;No</source>
        <translation type="unfinished">&amp;Non</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5692"/>
        <source>Not available for empty 3D surface plots!</source>
        <translation>Non disponible pour un graphique de surface 3D vide !</translation>
    </message>
    <message>
        <source>QtiPlot - Custom curves</source>
        <translation type="obsolete">QtiPlot - Courbes définies par l&apos;utilisateur</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6048"/>
        <location filename="../src/ApplicationWindow.cpp" line="6159"/>
        <location filename="../src/ApplicationWindow.cpp" line="6194"/>
        <source>&lt;h4&gt;There are no plot layers available in this window.&lt;/h4&gt;</source>
        <translation>&lt;h4&gt;Il n&apos;y a pas de planche disponible dans cette fenêtre.&lt;/h4&gt;</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6509"/>
        <source>Sorry, there are no results to display!</source>
        <translation>Désolé, il n&apos;y a pas de résultat à afficher !</translation>
    </message>
    <message>
        <source>QtiPlot - Add new layer?</source>
        <translation type="obsolete">QtiPlot - Ajouter une nouvelle planche ?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6672"/>
        <source>Do you want to add the text on a new layer or on the active layer?</source>
        <translation>Voulez-vous ajouter ce texte sur une nouvelle planche ou sur la planche active ?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6673"/>
        <source>On &amp;New Layer</source>
        <translation>Sur une &amp;nouvelle planche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6673"/>
        <source>On &amp;Active Layer</source>
        <translation>Sur la planche &amp;active</translation>
    </message>
    <message>
        <source>QtiPlot - Define Layout</source>
        <translation type="obsolete">QtiPlot - Définir une planche</translation>
    </message>
    <message>
        <source>QtiPlot - Layer Geometry</source>
        <translation type="obsolete">QtiPlot - Géométrie de la planche</translation>
    </message>
    <message>
        <source>QtiPlot - Duplicate error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de la duplication</translation>
    </message>
    <message>
        <source>Empty 3D surface plots can not be duplicated!</source>
        <translation type="obsolete">Les graphiques de surface 3D vides ne peuvent pas être dupliqués !</translation>
    </message>
    <message>
        <source>QtiPlot - Duplicate window error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de la duplication de la fenêtre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7104"/>
        <source>There are no windows available in this project!</source>
        <translation>Il n&apos;y a pas de fenêtre disponible dans ce projet !</translation>
    </message>
    <message>
        <source>QtiPlot - Window Geometry</source>
        <translation type="obsolete">QtiPlot - Géométrie de la fenêtre</translation>
    </message>
    <message>
        <source>About QtiPlot</source>
        <translation type="obsolete">A propos de QtiPlot</translation>
    </message>
    <message>
        <source>&amp;View pixel line profile</source>
        <translation type="obsolete">&amp;Voir le profile en pixel suivant une ligne</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7478"/>
        <source>&amp;Intensity Matrix</source>
        <translation>Matrice des &amp;Intensités</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7482"/>
        <source>&amp;Cut</source>
        <translation>Co&amp;uper</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7483"/>
        <location filename="../src/ApplicationWindow.cpp" line="7932"/>
        <location filename="../src/ApplicationWindow.cpp" line="8048"/>
        <location filename="../src/ApplicationWindow.cpp" line="8138"/>
        <source>&amp;Copy</source>
        <translation>&amp;Copier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7484"/>
        <location filename="../src/ApplicationWindow.cpp" line="10924"/>
        <location filename="../src/ApplicationWindow.cpp" line="10947"/>
        <source>&amp;Delete</source>
        <translation>&amp;Supprimer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10783"/>
        <location filename="../src/ApplicationWindow.cpp" line="10786"/>
        <location filename="../src/ApplicationWindow.cpp" line="10789"/>
        <location filename="../src/ApplicationWindow.cpp" line="11237"/>
        <location filename="../src/ApplicationWindow.cpp" line="11238"/>
        <location filename="../src/ApplicationWindow.cpp" line="11239"/>
        <source>&amp;Properties</source>
        <translation>&amp;Propriétés</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7499"/>
        <source>Please use the project explorer to select a window!</source>
        <translation>Veuillez utiliser l&apos;explorateur de projets pour sélectionner une fenêtre !</translation>
    </message>
    <message>
        <source>QtiPlot - index.html File Not Found!</source>
        <translation type="obsolete">QtiPlot - Fichier index.html non trouvé !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8177"/>
        <source>There is no file called &lt;b&gt;index.html&lt;/b&gt; in this folder.&lt;br&gt;Please choose another folder!</source>
        <translation>Il n&apos;y a pas de fichier nommé &lt;b&gt;index.html&lt;/b&gt; dans ce répertoire.&lt;br&gt;Veuillez choisir un autre répertoire !</translation>
    </message>
    <message>
        <source>Print</source>
        <translation type="obsolete">Imprimer</translation>
    </message>
    <message>
        <source>Backward</source>
        <translation type="obsolete">Précédent</translation>
    </message>
    <message>
        <source>Forward</source>
        <translation type="obsolete">Suivant</translation>
    </message>
    <message>
        <source>Home</source>
        <translation type="obsolete">Dossier utilisateur</translation>
    </message>
    <message>
        <source>Surface 3D</source>
        <translation type="obsolete">Surface 3D</translation>
    </message>
    <message>
        <source>Coordinates</source>
        <translation type="obsolete">Coordonnées</translation>
    </message>
    <message>
        <source>&amp;Coord</source>
        <translation type="obsolete">&amp;Coordonnées</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11335"/>
        <location filename="../src/ApplicationWindow.cpp" line="11336"/>
        <location filename="../src/ApplicationWindow.cpp" line="11337"/>
        <location filename="../src/ApplicationWindow.cpp" line="11338"/>
        <source>Box</source>
        <translation>Boîte</translation>
    </message>
    <message>
        <source>A</source>
        <translation type="obsolete">A</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11339"/>
        <location filename="../src/ApplicationWindow.cpp" line="11341"/>
        <location filename="../src/ApplicationWindow.cpp" line="11342"/>
        <source>Frame</source>
        <translation>Cadre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11340"/>
        <source>&amp;Frame</source>
        <translation>&amp;Cadre</translation>
    </message>
    <message>
        <source>F</source>
        <translation type="obsolete">F</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11343"/>
        <location filename="../src/ApplicationWindow.cpp" line="11344"/>
        <source>No Axes</source>
        <translation>Aucun axe</translation>
    </message>
    <message>
        <source>grid</source>
        <translation type="obsolete">Grille</translation>
    </message>
    <message>
        <source>Action</source>
        <translation type="obsolete">Action</translation>
    </message>
    <message>
        <source>Front Grid</source>
        <translation type="obsolete">Grille avant</translation>
    </message>
    <message>
        <source>Action_2</source>
        <translation type="obsolete">Action 2</translation>
    </message>
    <message>
        <source>Back Grid</source>
        <translation type="obsolete">Grille arrière</translation>
    </message>
    <message>
        <source>Action_3</source>
        <translation type="obsolete">Action 3</translation>
    </message>
    <message>
        <source>Right Grid</source>
        <translation type="obsolete">Grille de droite</translation>
    </message>
    <message>
        <source>Action_4</source>
        <translation type="obsolete">Action 4</translation>
    </message>
    <message>
        <source>Left Grid</source>
        <translation type="obsolete">Grille de gauche</translation>
    </message>
    <message>
        <source>Action_5</source>
        <translation type="obsolete">Action 5</translation>
    </message>
    <message>
        <source>Ceiling Grid</source>
        <translation type="obsolete">Grille de toit</translation>
    </message>
    <message>
        <source>Action_6</source>
        <translation type="obsolete">Action 6</translation>
    </message>
    <message>
        <source>Floor Grid</source>
        <translation type="obsolete">Grille de plancher</translation>
    </message>
    <message>
        <source>Plot Style</source>
        <translation type="obsolete">Style de graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11355"/>
        <location filename="../src/ApplicationWindow.cpp" line="11356"/>
        <location filename="../src/ApplicationWindow.cpp" line="11357"/>
        <location filename="../src/ApplicationWindow.cpp" line="11358"/>
        <source>Wireframe</source>
        <translation>Maillage transparent</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11359"/>
        <location filename="../src/ApplicationWindow.cpp" line="11360"/>
        <source>Hidden Line</source>
        <translation>Maillage</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11365"/>
        <location filename="../src/ApplicationWindow.cpp" line="11366"/>
        <source>Polygon only</source>
        <translation>Courbe 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11369"/>
        <location filename="../src/ApplicationWindow.cpp" line="11370"/>
        <source>Mesh &amp; filled Polygons</source>
        <translation>Courbe 3D + maillage</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11371"/>
        <location filename="../src/ApplicationWindow.cpp" line="11372"/>
        <location filename="../src/ApplicationWindow.cpp" line="11373"/>
        <location filename="../src/ApplicationWindow.cpp" line="11374"/>
        <source>Dots</source>
        <translation>Points</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11375"/>
        <location filename="../src/ApplicationWindow.cpp" line="11376"/>
        <location filename="../src/ApplicationWindow.cpp" line="11377"/>
        <location filename="../src/ApplicationWindow.cpp" line="11378"/>
        <source>Bars</source>
        <translation>Barres</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11379"/>
        <location filename="../src/ApplicationWindow.cpp" line="11380"/>
        <location filename="../src/ApplicationWindow.cpp" line="11381"/>
        <location filename="../src/ApplicationWindow.cpp" line="11382"/>
        <source>Cones</source>
        <translation>Cônes</translation>
    </message>
    <message>
        <source>Cross Hairs</source>
        <translation type="obsolete">Croix</translation>
    </message>
    <message>
        <source>Floor Style</source>
        <translation type="obsolete">Style de plancher</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11391"/>
        <location filename="../src/ApplicationWindow.cpp" line="11392"/>
        <source>Floor Data Projection</source>
        <translation>Projection des données sur le plancher</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11395"/>
        <location filename="../src/ApplicationWindow.cpp" line="11396"/>
        <source>Floor Isolines</source>
        <translation>Isolignes sur le plancher</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11399"/>
        <location filename="../src/ApplicationWindow.cpp" line="11400"/>
        <source>Empty Floor</source>
        <translation>Plancher vide</translation>
    </message>
    <message>
        <source>QtiPlot - Guess best origin for the new layer?</source>
        <translation type="obsolete">QtiPlot - Proposer une meilleure origine pour la nouvelle planche</translation>
    </message>
    <message>
        <source>Do you want QtiPlot to guess the best position for the new layer?
 Warning: this will rearrange existing layers!</source>
        <translation type="obsolete">Voulez-vous que QtiPlot propose la meilleure position pour la nouvelle planche ?
 Attention : cela va modifier la disposition des planches existantes !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9076"/>
        <source>&amp;Guess</source>
        <translation>&amp;Proposer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9076"/>
        <source>&amp;Top-left corner</source>
        <translation>&amp;Coin en haut à gauche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10397"/>
        <location filename="../src/ApplicationWindow.cpp" line="10957"/>
        <source>New &amp;Project</source>
        <translation>&amp;Projet</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10398"/>
        <location filename="../src/ApplicationWindow.cpp" line="10959"/>
        <source>Ctrl+N</source>
        <translation>Ctrl+N</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10408"/>
        <location filename="../src/ApplicationWindow.cpp" line="10968"/>
        <source>New &amp;Table</source>
        <translation>&amp;Table</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10409"/>
        <location filename="../src/ApplicationWindow.cpp" line="10969"/>
        <source>Ctrl+T</source>
        <translation>Ctrl+T</translation>
    </message>
    <message>
        <source>New spreadsheet</source>
        <translation type="obsolete">Feuille de calcul</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10412"/>
        <location filename="../src/ApplicationWindow.cpp" line="10972"/>
        <source>New &amp;Matrix</source>
        <translation>&amp;Matrice</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10974"/>
        <source>New matrix</source>
        <translation>Nouvelle matrice</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10416"/>
        <location filename="../src/ApplicationWindow.cpp" line="10976"/>
        <source>New &amp;Function Plot</source>
        <translation>Graphe de &amp;Fonction</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10417"/>
        <location filename="../src/ApplicationWindow.cpp" line="10978"/>
        <source>Ctrl+F</source>
        <translation>Ctrl+F</translation>
    </message>
    <message>
        <source>New &amp;Surface 3D Plot</source>
        <translation type="obsolete">Graphe de &amp;Surface 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10456"/>
        <location filename="../src/ApplicationWindow.cpp" line="11011"/>
        <source>Ctrl+Z</source>
        <translation>Ctrl+Z</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10424"/>
        <location filename="../src/ApplicationWindow.cpp" line="10984"/>
        <source>&amp;Open</source>
        <translation>&amp;Ouvrir</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10425"/>
        <location filename="../src/ApplicationWindow.cpp" line="10985"/>
        <source>Ctrl+O</source>
        <translation>Ctrl+O</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10986"/>
        <source>Open project</source>
        <translation>Ouvrir un projet</translation>
    </message>
    <message>
        <source>Open image &amp;file</source>
        <translation type="obsolete">Ouvrir un &amp;fichier image</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10429"/>
        <location filename="../src/ApplicationWindow.cpp" line="10989"/>
        <source>Ctrl+I</source>
        <translation>Ctrl+I</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10435"/>
        <location filename="../src/ApplicationWindow.cpp" line="10993"/>
        <source>&amp;Save Project</source>
        <translation>Enregi&amp;strer le projet</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10436"/>
        <location filename="../src/ApplicationWindow.cpp" line="10995"/>
        <source>Ctrl+S</source>
        <translation>Ctrl+S</translation>
    </message>
    <message>
        <source>Save Project &amp;as...</source>
        <translation type="obsolete">E&amp;nregistrer le projet sous...</translation>
    </message>
    <message>
        <source>&amp;Single file...</source>
        <translation type="obsolete">&amp;Un seul fichier...</translation>
    </message>
    <message>
        <source>Import data file</source>
        <translation type="obsolete">Importer un fichier de données</translation>
    </message>
    <message>
        <source>&amp;Multiple files...</source>
        <translation type="obsolete">&amp;Plusieurs fichiers...</translation>
    </message>
    <message>
        <source>Import multiple data files</source>
        <translation type="obsolete">Importer plusieurs fichiers de données</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10455"/>
        <location filename="../src/ApplicationWindow.cpp" line="11009"/>
        <source>&amp;Undo</source>
        <translation>Ann&amp;uler</translation>
    </message>
    <message>
        <source>Ctrl+U</source>
        <translation type="obsolete">Ctrl+U</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10460"/>
        <location filename="../src/ApplicationWindow.cpp" line="11013"/>
        <source>&amp;Redo</source>
        <translation>&amp;Refaire</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10461"/>
        <location filename="../src/ApplicationWindow.cpp" line="11015"/>
        <source>Ctrl+R</source>
        <translation>Ctrl+R</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10465"/>
        <location filename="../src/ApplicationWindow.cpp" line="11017"/>
        <source>&amp;Duplicate</source>
        <translation>&amp;Dupliquer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11018"/>
        <source>Duplicate window</source>
        <translation>Dupliquer la fenêtre</translation>
    </message>
    <message>
        <source>Cu&amp;t selection</source>
        <translation type="obsolete">Co&amp;uper</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10469"/>
        <location filename="../src/ApplicationWindow.cpp" line="11022"/>
        <source>Ctrl+X</source>
        <translation>Ctrl+X</translation>
    </message>
    <message>
        <source>&amp;Copy selection</source>
        <translation type="obsolete">&amp;Copier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10473"/>
        <location filename="../src/ApplicationWindow.cpp" line="11026"/>
        <source>Ctrl+C</source>
        <translation>Ctrl+C</translation>
    </message>
    <message>
        <source>&amp;Paste selection</source>
        <translation type="obsolete">C&amp;oller</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10477"/>
        <location filename="../src/ApplicationWindow.cpp" line="11030"/>
        <source>Ctrl+V</source>
        <translation>Ctrl+V</translation>
    </message>
    <message>
        <source>&amp;Delete selection</source>
        <translation type="obsolete">&amp;Supprimer</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation type="obsolete">Supprimer</translation>
    </message>
    <message>
        <source>Project &amp;explorer</source>
        <translation type="obsolete">&amp;Explorateur de projets</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10486"/>
        <location filename="../src/ApplicationWindow.cpp" line="11037"/>
        <source>Ctrl+E</source>
        <translation>Ctrl+E</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11038"/>
        <source>Show project explorer</source>
        <translation>Afficher l&apos;explorateur de projets</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11040"/>
        <source>Results &amp;Log</source>
        <translation>&amp;Historique des résultats</translation>
    </message>
    <message>
        <source>Show calculus results</source>
        <translation type="obsolete">Afficher les résultats des calculs</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10498"/>
        <location filename="../src/ApplicationWindow.cpp" line="11048"/>
        <source>Add La&amp;yer</source>
        <translation>Ajouter une planche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10509"/>
        <location filename="../src/ApplicationWindow.cpp" line="11059"/>
        <source>&amp;Current</source>
        <translation>Ce &amp;graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10402"/>
        <location filename="../src/ApplicationWindow.cpp" line="10963"/>
        <source>Ctrl+G</source>
        <translation>Ctrl+G</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11061"/>
        <source>Export current graph</source>
        <translation>Exporter le graphe actif</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10514"/>
        <location filename="../src/ApplicationWindow.cpp" line="11064"/>
        <source>Alt+X</source>
        <translation>Alt+X</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11065"/>
        <source>Export all graphs</source>
        <translation>Exporter tous les graphes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7940"/>
        <location filename="../src/ApplicationWindow.cpp" line="8056"/>
        <location filename="../src/ApplicationWindow.cpp" line="10521"/>
        <location filename="../src/ApplicationWindow.cpp" line="11071"/>
        <source>&amp;Print</source>
        <translation>Im&amp;primer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10522"/>
        <location filename="../src/ApplicationWindow.cpp" line="11072"/>
        <source>Ctrl+P</source>
        <translation>Ctrl+P</translation>
    </message>
    <message>
        <source>Print graph</source>
        <translation type="obsolete">Imprimer le graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10528"/>
        <location filename="../src/ApplicationWindow.cpp" line="11076"/>
        <source>E&amp;xport ASCII</source>
        <translation>E&amp;xporter en ASCII</translation>
    </message>
    <message>
        <source>Set import &amp;options</source>
        <translation type="obsolete">&amp;Options d&apos;importation</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10531"/>
        <location filename="../src/ApplicationWindow.cpp" line="11078"/>
        <source>&amp;Quit</source>
        <translation>&amp;Quitter</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10532"/>
        <location filename="../src/ApplicationWindow.cpp" line="11079"/>
        <source>Ctrl+Q</source>
        <translation>Ctrl+Q</translation>
    </message>
    <message>
        <source>Clear &amp;log information</source>
        <translation type="obsolete">Effacer l&apos;&amp;historique</translation>
    </message>
    <message>
        <source>Plot &amp;wizard</source>
        <translation type="obsolete">Assistant graphique</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10542"/>
        <location filename="../src/ApplicationWindow.cpp" line="11085"/>
        <source>Ctrl+Alt+W</source>
        <translation>Ctrl+Alt+W</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10545"/>
        <location filename="../src/ApplicationWindow.cpp" line="11088"/>
        <source>&amp;Preferences...</source>
        <translation>&amp;Préférences...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11092"/>
        <source>Add curve to graph</source>
        <translation>Ajouter une courbe au graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10552"/>
        <location filename="../src/ApplicationWindow.cpp" line="11094"/>
        <source>Add &amp;Error Bars...</source>
        <translation>Ajouter des barres d&apos;&amp;erreur...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10553"/>
        <location filename="../src/ApplicationWindow.cpp" line="11096"/>
        <source>Ctrl+B</source>
        <translation>Ctrl+B</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10557"/>
        <location filename="../src/ApplicationWindow.cpp" line="11100"/>
        <source>Ctrl+Alt+F</source>
        <translation>Ctrl+Alt+F</translation>
    </message>
    <message>
        <source>&amp;Rescale to show all</source>
        <translation type="obsolete">&amp;Echelle automatique</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11104"/>
        <source>Best fit</source>
        <translation>Meilleur ajustement</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10564"/>
        <location filename="../src/ApplicationWindow.cpp" line="11106"/>
        <source>New &amp;Legend</source>
        <translation>Nouvelle &amp;Légende</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10565"/>
        <location filename="../src/ApplicationWindow.cpp" line="11107"/>
        <source>Ctrl+L</source>
        <translation>Ctrl+L</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11108"/>
        <source>Add new legend</source>
        <translation>Ajouter une nouvelle légende</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10572"/>
        <location filename="../src/ApplicationWindow.cpp" line="11114"/>
        <source>Add &amp;Image</source>
        <translation>Ajouter une &amp;image</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="482"/>
        <location filename="../src/ApplicationWindow.cpp" line="11319"/>
        <source>Add &amp;Text</source>
        <translation>Ajouter du &amp;texte</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10579"/>
        <location filename="../src/ApplicationWindow.cpp" line="11118"/>
        <source>&amp;Line</source>
        <translation>&amp;Ligne</translation>
    </message>
    <message>
        <source>Plot with line</source>
        <translation type="obsolete">Lignes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10583"/>
        <location filename="../src/ApplicationWindow.cpp" line="10653"/>
        <location filename="../src/ApplicationWindow.cpp" line="11121"/>
        <location filename="../src/ApplicationWindow.cpp" line="11164"/>
        <source>&amp;Scatter</source>
        <translation>&amp;Nuage</translation>
    </message>
    <message>
        <source>Plot with symbols</source>
        <translation type="obsolete">Symboles</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10587"/>
        <location filename="../src/ApplicationWindow.cpp" line="11124"/>
        <source>Line + S&amp;ymbol</source>
        <translation>Ligne + S&amp;ymbole</translation>
    </message>
    <message>
        <source>Plot with line + symbols</source>
        <translation type="obsolete">Lignes et symboles</translation>
    </message>
    <message>
        <source>Vertical &amp;drop lines</source>
        <translation type="obsolete">Eping&amp;les</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10595"/>
        <location filename="../src/ApplicationWindow.cpp" line="11129"/>
        <source>&amp;Spline</source>
        <translation>&amp;Spline</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10603"/>
        <location filename="../src/ApplicationWindow.cpp" line="11130"/>
        <source>&amp;Vertical Steps</source>
        <translation>Marches &amp;verticales</translation>
    </message>
    <message>
        <source>&amp;Columns</source>
        <translation type="obsolete">&amp;Colonnes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11134"/>
        <source>Plot with vertical bars</source>
        <translation>Barres verticales</translation>
    </message>
    <message>
        <source>&amp;Rows</source>
        <translation type="obsolete">&amp;Rangées</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11137"/>
        <source>Plot with horizontal bars</source>
        <translation>Barres horizontales</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10615"/>
        <location filename="../src/ApplicationWindow.cpp" line="11139"/>
        <source>&amp;Area</source>
        <translation>&amp;Aire</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11140"/>
        <source>Plot area</source>
        <translation>Graphe </translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10619"/>
        <location filename="../src/ApplicationWindow.cpp" line="11142"/>
        <source>&amp;Pie</source>
        <translation>&amp;Secteur</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11143"/>
        <source>Plot pie</source>
        <translation>Secteurs</translation>
    </message>
    <message>
        <source>&amp;Vectors &amp;XYXY</source>
        <translation type="obsolete">&amp;Vecteurs &amp;XYXY</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10628"/>
        <location filename="../src/ApplicationWindow.cpp" line="11151"/>
        <source>&amp;Histogram</source>
        <translation>&amp;Histogramme</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10632"/>
        <location filename="../src/ApplicationWindow.cpp" line="11152"/>
        <source>&amp;Stacked Histogram</source>
        <translation>Hi&amp;stogramme empilé</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10635"/>
        <location filename="../src/ApplicationWindow.cpp" line="11153"/>
        <source>&amp;Vertical 2 Layers</source>
        <translation>&amp;Colonne de 2 planches</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10638"/>
        <location filename="../src/ApplicationWindow.cpp" line="11154"/>
        <source>&amp;Horizontal 2 Layers</source>
        <translation>&amp;Rangée de 2 planches</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10641"/>
        <location filename="../src/ApplicationWindow.cpp" line="11155"/>
        <source>&amp;4 Layers</source>
        <translation>Tableau de &amp;4 planches</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10644"/>
        <location filename="../src/ApplicationWindow.cpp" line="11156"/>
        <source>&amp;Stacked Layers</source>
        <translation>Planches empilés</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10647"/>
        <location filename="../src/ApplicationWindow.cpp" line="11158"/>
        <source>&amp;Ribbon</source>
        <translation>&amp;Rubans</translation>
    </message>
    <message>
        <source>Plot 3D Ribbon</source>
        <translation type="obsolete">Rubans 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10650"/>
        <location filename="../src/ApplicationWindow.cpp" line="11161"/>
        <source>&amp;Bars</source>
        <translation>&amp;Barres</translation>
    </message>
    <message>
        <source>Plot 3D Bars</source>
        <translation type="obsolete">Barres 3D</translation>
    </message>
    <message>
        <source>Plot 3D Scatter</source>
        <translation type="obsolete">Nuage 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10656"/>
        <location filename="../src/ApplicationWindow.cpp" line="11167"/>
        <source>&amp;Trajectory</source>
        <translation>&amp;Trajectoire</translation>
    </message>
    <message>
        <source>Plot 3D Trajectory</source>
        <translation type="obsolete">Graphe à trajectoire 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10413"/>
        <location filename="../src/ApplicationWindow.cpp" line="10973"/>
        <source>Ctrl+M</source>
        <translation>Ctrl+M</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10765"/>
        <location filename="../src/ApplicationWindow.cpp" line="11230"/>
        <source>Alt+R</source>
        <translation>Alt+R</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10659"/>
        <location filename="../src/ApplicationWindow.cpp" line="11179"/>
        <source>Statistics on &amp;Columns</source>
        <translation>Statistiques sur &amp;colonnes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11180"/>
        <source>Selected columns statistics</source>
        <translation>Statistiques sur les colonnes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10662"/>
        <location filename="../src/ApplicationWindow.cpp" line="11182"/>
        <source>Statistics on &amp;Rows</source>
        <translation>Statistiques sur &amp;rangées</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11183"/>
        <source>Selected rows statistics</source>
        <translation>Statistiques sur les rangées</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10665"/>
        <location filename="../src/ApplicationWindow.cpp" line="11184"/>
        <source>&amp;Integrate ...</source>
        <translation>&amp;Intégrer...</translation>
    </message>
    <message>
        <source>Li&amp;near</source>
        <translation type="obsolete">Li&amp;néaire</translation>
    </message>
    <message>
        <source>Cu&amp;bic spline</source>
        <translation type="obsolete">spline cu&amp;bique</translation>
    </message>
    <message>
        <source>Non-&amp;rounded Akime spline</source>
        <translation type="obsolete">Spline Akime non ar&amp;rondie</translation>
    </message>
    <message>
        <source>&amp;Forward</source>
        <translation type="obsolete">&amp;Directe</translation>
    </message>
    <message>
        <source>&amp;Inverse</source>
        <translation type="obsolete">&amp;Inverse</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10695"/>
        <location filename="../src/ApplicationWindow.cpp" line="11194"/>
        <source>&amp;Differentiate</source>
        <translation>&amp;Dériver</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10698"/>
        <location filename="../src/ApplicationWindow.cpp" line="11195"/>
        <source>Fit &amp;Linear</source>
        <translation>Ajustement &amp;linéaire</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10701"/>
        <location filename="../src/ApplicationWindow.cpp" line="11196"/>
        <source>Fit &amp;Polynomial ...</source>
        <translation>Ajustement &amp;Polynomial...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10704"/>
        <location filename="../src/ApplicationWindow.cpp" line="11197"/>
        <source>&amp;First Order ...</source>
        <translation>&amp;Premier ordre...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10707"/>
        <location filename="../src/ApplicationWindow.cpp" line="11198"/>
        <source>&amp;Second Order ...</source>
        <translation>&amp;Second ordre...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10710"/>
        <location filename="../src/ApplicationWindow.cpp" line="11199"/>
        <source>&amp;Third Order ...</source>
        <translation>&amp;Troisième ordre...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10719"/>
        <location filename="../src/ApplicationWindow.cpp" line="11202"/>
        <source>Fit &amp;Gaussian</source>
        <translation>Ajustement &amp;Gaussien</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10722"/>
        <location filename="../src/ApplicationWindow.cpp" line="11203"/>
        <source>Fit Lorent&amp;zian</source>
        <translation>Ajustement &amp;Lorentzien</translation>
    </message>
    <message>
        <source>&amp;Non-linear Curve Fit ...</source>
        <translation type="obsolete">Ajustement &amp;non-linéaire</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10726"/>
        <location filename="../src/ApplicationWindow.cpp" line="11206"/>
        <source>Ctrl+Y</source>
        <translation>Ctrl+Y</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10729"/>
        <location filename="../src/ApplicationWindow.cpp" line="11208"/>
        <source>&amp;Plot ...</source>
        <translation>&amp;Graphique...</translation>
    </message>
    <message>
        <source>&amp;Axes/Grid ...</source>
        <translation type="obsolete">&amp;Axes/Grille ...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10741"/>
        <location filename="../src/ApplicationWindow.cpp" line="11212"/>
        <source>&amp;Title ...</source>
        <translation>&amp;Titre...</translation>
    </message>
    <message>
        <source>&amp;Columns...</source>
        <translation type="obsolete">&amp;Colonnes...</translation>
    </message>
    <message>
        <source>&amp;Rows...</source>
        <translation type="obsolete">&amp;Rangées...</translation>
    </message>
    <message>
        <source>&amp;About</source>
        <translation type="obsolete">&amp;A propos</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10745"/>
        <location filename="../src/ApplicationWindow.cpp" line="11215"/>
        <source>F1</source>
        <translation>F1</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10749"/>
        <location filename="../src/ApplicationWindow.cpp" line="11218"/>
        <source>Ctrl+H</source>
        <translation>Ctrl+H</translation>
    </message>
    <message>
        <source>&amp;Choose help folder...</source>
        <translation type="obsolete">&amp;Choisir le répertoire d&apos;aide...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10757"/>
        <location filename="../src/ApplicationWindow.cpp" line="11224"/>
        <source>&amp;Rename Window</source>
        <translation>&amp;Renommer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7434"/>
        <location filename="../src/ApplicationWindow.cpp" line="10760"/>
        <location filename="../src/ApplicationWindow.cpp" line="11226"/>
        <source>Close &amp;Window</source>
        <translation>&amp;Fermer la fenêtre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10761"/>
        <location filename="../src/ApplicationWindow.cpp" line="11227"/>
        <source>Ctrl+W</source>
        <translation>Ctrl+W</translation>
    </message>
    <message>
        <source>Add column</source>
        <translation type="obsolete">Ajouter une colonne</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10768"/>
        <location filename="../src/ApplicationWindow.cpp" line="11232"/>
        <source>Window &amp;Geometry...</source>
        <translation>&amp;Géométrie...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7432"/>
        <location filename="../src/ApplicationWindow.cpp" line="10771"/>
        <location filename="../src/ApplicationWindow.cpp" line="11233"/>
        <source>&amp;Hide Window</source>
        <translation>Cacher</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7463"/>
        <location filename="../src/ApplicationWindow.cpp" line="10774"/>
        <source>More windows...</source>
        <translation>Autres fenêtres...</translation>
    </message>
    <message>
        <source>&amp;Intensity table</source>
        <translation type="obsolete">Table des &amp;intensités</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10792"/>
        <location filename="../src/ApplicationWindow.cpp" line="11240"/>
        <source>&amp;Activate Window</source>
        <translation>&amp;Activer la fenêtre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10795"/>
        <location filename="../src/ApplicationWindow.cpp" line="11241"/>
        <source>Mi&amp;nimize Window</source>
        <translation>Réd&amp;uire la fenêtre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10798"/>
        <location filename="../src/ApplicationWindow.cpp" line="11242"/>
        <source>Ma&amp;ximize Window</source>
        <translation>Ma&amp;ximizer la fenêtre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10801"/>
        <location filename="../src/ApplicationWindow.cpp" line="11243"/>
        <source>Re&amp;size Window...</source>
        <translation>&amp;Redimensionner la fenêtre...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10804"/>
        <location filename="../src/ApplicationWindow.cpp" line="11244"/>
        <source>&amp;Print Window</source>
        <translation>Im&amp;primer la fenêtre</translation>
    </message>
    <message>
        <source>&amp;Layer geometry</source>
        <translation type="obsolete">Géométrie de la planche</translation>
    </message>
    <message>
        <source>E&amp;mpty 3D plot</source>
        <translation type="obsolete">Graphe 3D &amp;Vide</translation>
    </message>
    <message>
        <source>Add 3D &amp;Function</source>
        <translation type="obsolete">Ajoute une &amp;Fonction 3D</translation>
    </message>
    <message>
        <source>Add 3D &amp;Data</source>
        <translation type="obsolete">Ajouter des &amp;données 3D</translation>
    </message>
    <message>
        <source>Set &amp;Properties...</source>
        <translation type="obsolete">&amp;Propriétés...</translation>
    </message>
    <message>
        <source>Set &amp;Dimensions...</source>
        <translation type="obsolete">&amp;Dimensions...</translation>
    </message>
    <message>
        <source>Set &amp;Values...</source>
        <translation type="obsolete">&amp;Valeurs...</translation>
    </message>
    <message>
        <source>&amp;Transpose</source>
        <translation type="obsolete">&amp;Transposer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10816"/>
        <location filename="../src/ApplicationWindow.cpp" line="11248"/>
        <source>&amp;Invert</source>
        <translation>&amp;Inverser</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10819"/>
        <location filename="../src/ApplicationWindow.cpp" line="11249"/>
        <source>&amp;Determinant</source>
        <translation>&amp;Déterminant</translation>
    </message>
    <message>
        <source>&amp;Convert to spreadsheet</source>
        <translation type="obsolete">&amp;Convertir en feuille de calcul</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10828"/>
        <location filename="../src/ApplicationWindow.cpp" line="11252"/>
        <source>3D &amp;Wire Frame</source>
        <translation>&amp;Fil de fer 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10831"/>
        <location filename="../src/ApplicationWindow.cpp" line="11253"/>
        <source>3D &amp;Hidden Line</source>
        <translation>Lignes &amp;cachées 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10834"/>
        <location filename="../src/ApplicationWindow.cpp" line="11254"/>
        <source>3D &amp;Polygons</source>
        <translation>&amp;Polygônes 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10837"/>
        <location filename="../src/ApplicationWindow.cpp" line="11255"/>
        <source>3D Wire &amp;Surface</source>
        <translation>&amp;Surface 3D</translation>
    </message>
    <message>
        <source>Matrix Plot 3D</source>
        <translation type="obsolete">Graphe 3D de matrice</translation>
    </message>
    <message>
        <source>Data Plot 3D</source>
        <translation type="obsolete">Graphe 3D de données</translation>
    </message>
    <message>
        <source>Function Plot 3D</source>
        <translation type="obsolete">Graphe 3D de fonctions</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2837"/>
        <location filename="../src/ApplicationWindow.cpp" line="6570"/>
        <source>There are no curves available on this plot!</source>
        <translation>Il n&apos;y a pas de courbes disponibles sur ce graphe !</translation>
    </message>
    <message>
        <source>The graph you want to analyse doesn&apos;t exist anymore.
Operation aborted!</source>
        <translation type="obsolete">Le graphe que vous voulez analyser n&apos;existe plus. Opération abandonnée!</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11289"/>
        <source>Disable &amp;tools</source>
        <translation>Poin&amp;teur</translation>
    </message>
    <message>
        <source>&amp;Zoom</source>
        <translation type="obsolete">&amp;Zoom</translation>
    </message>
    <message>
        <source>ALT+Z</source>
        <translation type="obsolete">Alt+Z</translation>
    </message>
    <message>
        <source>&amp;Data reader</source>
        <translation type="obsolete">Curseur sur courbe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="534"/>
        <location filename="../src/ApplicationWindow.cpp" line="11301"/>
        <source>CTRL+D</source>
        <translation>CTRL+D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11302"/>
        <source>Data reader</source>
        <translation>Curseur sur courbe</translation>
    </message>
    <message>
        <source>&amp;Select data range</source>
        <translation type="obsolete">Gamme des données</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="541"/>
        <location filename="../src/ApplicationWindow.cpp" line="11305"/>
        <source>ALT+S</source>
        <translation>Alt+S</translation>
    </message>
    <message>
        <source>S&amp;creen reader</source>
        <translation type="obsolete">Curseur libre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11309"/>
        <source>Screen reader</source>
        <translation>Curseur libre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="547"/>
        <location filename="../src/ApplicationWindow.cpp" line="11311"/>
        <source>&amp;Move Data Points...</source>
        <translation>Déplacer une valeur...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="553"/>
        <location filename="../src/ApplicationWindow.cpp" line="11315"/>
        <source>Remove &amp;Bad Data Points...</source>
        <translation>Supprimer une valeur...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="554"/>
        <location filename="../src/ApplicationWindow.cpp" line="11316"/>
        <source>Alt+B</source>
        <translation>Alt+B</translation>
    </message>
    <message>
        <source>Draw &amp;Arrow/Line</source>
        <translation type="obsolete">Tracer une &amp;Flèche/Ligne</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="497"/>
        <location filename="../src/ApplicationWindow.cpp" line="11328"/>
        <source>CTRL+ALT+L</source>
        <translation>Ctrl+Alt+L</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1117"/>
        <source>&amp;Table</source>
        <translation>&amp;Table</translation>
    </message>
    <message>
        <source>Plot 3&amp;D</source>
        <translation type="obsolete">Graphe 3&amp;D</translation>
    </message>
    <message>
        <source>QtiPlot - Plot error</source>
        <translation type="obsolete">QtiPlot - Erreur lors du tracé du graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1361"/>
        <location filename="../src/ApplicationWindow.cpp" line="1399"/>
        <location filename="../src/ApplicationWindow.cpp" line="1420"/>
        <location filename="../src/ApplicationWindow.cpp" line="1441"/>
        <location filename="../src/ApplicationWindow.cpp" line="1455"/>
        <source>You must select exactly one column for plotting!</source>
        <translation>Vous ne devez sélectionner qu&apos;une seule colonne !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1470"/>
        <location filename="../src/ApplicationWindow.cpp" line="13600"/>
        <source>Please select a column to plot!</source>
        <translation type="unfinished">Veuillez sélectionner une colone à tracer !</translation>
    </message>
    <message>
        <source>This operation can not be performed on curves plotted from columns having a non-numerical format.</source>
        <translation type="obsolete">Cette opération ne peut pas être réalisée pour des courbes tracées à partir de colonnes ayant des données non numériques.</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5396"/>
        <source>Choose a directory to export the tables to</source>
        <translation>Choisissez un répertoire pour exporter les tables</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6558"/>
        <source>There are no plot layers available in this window!</source>
        <translation>Il n&apos;y a pas de planche disponible dans cette fenêtre !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2843"/>
        <location filename="../src/ApplicationWindow.cpp" line="5200"/>
        <location filename="../src/ApplicationWindow.cpp" line="6012"/>
        <location filename="../src/ApplicationWindow.cpp" line="6085"/>
        <location filename="../src/ApplicationWindow.cpp" line="6128"/>
        <location filename="../src/ApplicationWindow.cpp" line="6577"/>
        <location filename="../src/ApplicationWindow.cpp" line="6603"/>
        <location filename="../src/ApplicationWindow.cpp" line="11665"/>
        <location filename="../src/ApplicationWindow.cpp" line="11700"/>
        <location filename="../src/ApplicationWindow.cpp" line="11745"/>
        <source>This functionality is not available for pie plots!</source>
        <translation>Cette fonctionnalité n&apos;est pas disponible pour des graphiques à secteurs !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6822"/>
        <source>There are no plot layers available in this window.</source>
        <translation>Il n&apos;y a pas de planche disponible dans cette fenêtre.</translation>
    </message>
    <message>
        <source>Alt+L</source>
        <translation type="obsolete">Alt+L</translation>
    </message>
    <message>
        <source>Alt+A</source>
        <translation type="obsolete">Alt+A</translation>
    </message>
    <message>
        <source>Import i&amp;mage...</source>
        <translation type="obsolete">Importer une i&amp;mage...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10499"/>
        <location filename="../src/ApplicationWindow.cpp" line="11050"/>
        <source>ALT+L</source>
        <translation>Alt+L</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10502"/>
        <location filename="../src/ApplicationWindow.cpp" line="11052"/>
        <source>Arran&amp;ge Layers</source>
        <translation>Re&amp;disposer les planches</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10503"/>
        <location filename="../src/ApplicationWindow.cpp" line="11054"/>
        <source>ALT+A</source>
        <translation>Alt+A</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10525"/>
        <location filename="../src/ApplicationWindow.cpp" line="11075"/>
        <source>Print All Plo&amp;ts</source>
        <translation>Imprimer &amp;tous les graphes</translation>
    </message>
    <message>
        <source>Delete &amp;fit tables</source>
        <translation type="obsolete">Supprimer les tables des &amp;ajustements</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10548"/>
        <location filename="../src/ApplicationWindow.cpp" line="11090"/>
        <source>Add/Remove &amp;Curve...</source>
        <translation>Ajouter/Supprimer une &amp;courbe...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10549"/>
        <location filename="../src/ApplicationWindow.cpp" line="11091"/>
        <source>ALT+C</source>
        <translation>Alt+C</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10556"/>
        <location filename="../src/ApplicationWindow.cpp" line="11098"/>
        <source>Add &amp;Function...</source>
        <translation>Ajouter une &amp;Fonction...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10573"/>
        <location filename="../src/ApplicationWindow.cpp" line="11116"/>
        <source>ALT+I</source>
        <translation>Alt+I</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="483"/>
        <location filename="../src/ApplicationWindow.cpp" line="11321"/>
        <source>ALT+T</source>
        <translation>Alt+T</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10713"/>
        <location filename="../src/ApplicationWindow.cpp" line="11200"/>
        <source>Fit Exponential Gro&amp;wth ...</source>
        <translation>Ajustement &amp;croissance exponentielle...</translation>
    </message>
    <message>
        <source>Column &amp;Options ...</source>
        <translation type="obsolete">&amp;Options de la colonne...</translation>
    </message>
    <message>
        <source>Set Column &amp;Values ...</source>
        <translation type="obsolete">Fixer les &amp;Valeurs de la Colonne...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10764"/>
        <location filename="../src/ApplicationWindow.cpp" line="11229"/>
        <source>&amp;Remove Layer</source>
        <translation>&amp;Supprimer la planche</translation>
    </message>
    <message>
        <source>Convert to &amp;matrix</source>
        <translation type="obsolete">Convertir en &amp;matrice</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10668"/>
        <location filename="../src/ApplicationWindow.cpp" line="11185"/>
        <source>Inte&amp;rpolate ...</source>
        <translation>Inte&amp;rpolation...</translation>
    </message>
    <message>
        <source>QtiPlot - Project Explorer</source>
        <translation type="obsolete">QtiPlot - Explorateur de Projets</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="223"/>
        <location filename="../src/ApplicationWindow.cpp" line="658"/>
        <source>Name</source>
        <translation>Nom</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="224"/>
        <location filename="../src/ApplicationWindow.cpp" line="659"/>
        <location filename="../src/ApplicationWindow.cpp" line="12667"/>
        <location filename="../src/ApplicationWindow.cpp" line="12709"/>
        <location filename="../src/ApplicationWindow.cpp" line="12997"/>
        <location filename="../src/ApplicationWindow.cpp" line="13002"/>
        <location filename="../src/ApplicationWindow.cpp" line="13007"/>
        <location filename="../src/ApplicationWindow.cpp" line="13012"/>
        <location filename="../src/ApplicationWindow.cpp" line="13017"/>
        <source>Type</source>
        <translation>Type</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="225"/>
        <location filename="../src/ApplicationWindow.cpp" line="660"/>
        <source>View</source>
        <translation>Vue</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12673"/>
        <source>Size</source>
        <translation>Taille</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="226"/>
        <location filename="../src/ApplicationWindow.cpp" line="661"/>
        <location filename="../src/ApplicationWindow.cpp" line="12686"/>
        <location filename="../src/ApplicationWindow.cpp" line="12690"/>
        <location filename="../src/ApplicationWindow.cpp" line="12714"/>
        <location filename="../src/ApplicationWindow.cpp" line="13020"/>
        <source>Created</source>
        <translation>Créé</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="227"/>
        <location filename="../src/ApplicationWindow.cpp" line="662"/>
        <location filename="../src/ApplicationWindow.cpp" line="12992"/>
        <source>Label</source>
        <translation>Etiquette</translation>
    </message>
    <message>
        <source>QtiPlot - Results Log</source>
        <translation type="obsolete">Qtiplot - Historique des Résultats</translation>
    </message>
    <message>
        <source>QtiPlot - Enter rows number</source>
        <translation type="obsolete">QtiPlot - Entrer le nombre de rangées</translation>
    </message>
    <message>
        <source>Rows</source>
        <translation type="obsolete">Rangées</translation>
    </message>
    <message>
        <source>QtiPlot - Enter columns number</source>
        <translation type="obsolete">QtiPlot - Entrer le nombre de colonnes</translation>
    </message>
    <message>
        <source>Columns</source>
        <translation type="obsolete">Colonnes</translation>
    </message>
    <message>
        <source>QtiPlot - Column selection error</source>
        <translation type="obsolete">QtiPlot - Erreur de sélection de la colonne</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5558"/>
        <source>Please select a column first!</source>
        <translation>Vous devez d&apos;abord sélectionner une colonne !</translation>
    </message>
    <message>
        <source>Line + s&amp;ymbol</source>
        <translation type="obsolete">Ligne + S&amp;ymbole</translation>
    </message>
    <message>
        <source>3D Ribbo&amp;n</source>
        <translation type="obsolete">ruba&amp;ns 3D</translation>
    </message>
    <message>
        <source>3D &amp;Bars</source>
        <translation type="obsolete">&amp;Barres 3D</translation>
    </message>
    <message>
        <source>3&amp;D Scatter</source>
        <translation type="obsolete">Nuage 3&amp;D</translation>
    </message>
    <message>
        <source>3D &amp;Trajectory</source>
        <translation type="obsolete">&amp;Trajectoire 3D</translation>
    </message>
    <message>
        <source>&amp;Stacked Histograms</source>
        <translation type="obsolete">Hi&amp;stogramme empilé</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1104"/>
        <source>&amp;Plot</source>
        <translation>&amp;Graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8137"/>
        <source>Cu&amp;t</source>
        <translation>Co&amp;uper</translation>
    </message>
    <message>
        <source>Past&amp;e</source>
        <translation type="obsolete">C&amp;oller</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Aucun</translation>
    </message>
    <message>
        <source>Set as...</source>
        <translation type="obsolete">Fixer à...</translation>
    </message>
    <message>
        <source>Set column &amp;values...</source>
        <translation type="obsolete">Fixer les &amp;valeurs de la colonne...</translation>
    </message>
    <message>
        <source>Ro&amp;w Numbers</source>
        <translation type="obsolete">Numéros des &amp;rangées</translation>
    </message>
    <message>
        <source>&amp;Random values</source>
        <translation type="obsolete">Valeurs &amp;Aléatoires</translation>
    </message>
    <message>
        <source>&amp;Fill column with</source>
        <translation type="obsolete">&amp;Remplir la colonne avec</translation>
    </message>
    <message>
        <source>&amp;Column</source>
        <translation type="obsolete">&amp;Colonnes</translation>
    </message>
    <message>
        <source>&amp;Normalize</source>
        <translation type="obsolete">&amp;Normaliser</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8151"/>
        <source>Clea&amp;r</source>
        <translation>Efface&amp;r</translation>
    </message>
    <message>
        <source>&amp;Insert</source>
        <translation type="obsolete">&amp;Insérer</translation>
    </message>
    <message>
        <source>&amp;Add column</source>
        <translation type="obsolete">&amp;Ajouter une colonne</translation>
    </message>
    <message>
        <source>&amp;Ascending</source>
        <translation type="obsolete">&amp;Croissant</translation>
    </message>
    <message>
        <source>&amp;Descending</source>
        <translation type="obsolete">&amp;décroissant</translation>
    </message>
    <message>
        <source>Sort Colu&amp;mn</source>
        <translation type="obsolete">Trier la &amp;colonne</translation>
    </message>
    <message>
        <source>Sort Ta&amp;ble</source>
        <translation type="obsolete">Trier la ta&amp;ble</translation>
    </message>
    <message>
        <source>Pr&amp;operties</source>
        <translation type="obsolete">Pr&amp;opriétés</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10625"/>
        <location filename="../src/ApplicationWindow.cpp" line="11145"/>
        <source>Vectors &amp;XYXY</source>
        <translation>Vecteurs &amp;XYXY</translation>
    </message>
    <message>
        <source>&amp;Fill columns with</source>
        <translation type="obsolete">&amp;Remplir les colonnes avec</translation>
    </message>
    <message>
        <source>&amp;Sort</source>
        <translation type="obsolete">&amp;Trier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7422"/>
        <source>&amp;Cascade</source>
        <translation>&amp;Cascade</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7423"/>
        <source>&amp;Tile</source>
        <translation>Adossées</translation>
    </message>
    <message>
        <source>&amp;Next</source>
        <translation type="obsolete">&amp;Suivante</translation>
    </message>
    <message>
        <source>&amp;Previous</source>
        <translation type="obsolete">&amp;Précédente</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12437"/>
        <source>&amp;Rename</source>
        <translation type="unfinished">&amp;Renommer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7487"/>
        <location filename="../src/ApplicationWindow.cpp" line="7489"/>
        <location filename="../src/ApplicationWindow.cpp" line="7491"/>
        <location filename="../src/ApplicationWindow.cpp" line="12465"/>
        <location filename="../src/ApplicationWindow.cpp" line="13487"/>
        <source>&amp;Properties...</source>
        <translation>&amp;Propriétés...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7614"/>
        <source>Save changes to project: &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt; ?</source>
        <translation>Sauvegarder les changements du projet : &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt; ?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10735"/>
        <location filename="../src/ApplicationWindow.cpp" line="11210"/>
        <source>&amp;Axes...</source>
        <translation>&amp;Axes...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10738"/>
        <location filename="../src/ApplicationWindow.cpp" line="11211"/>
        <source>&amp;Grid ...</source>
        <translation>&amp;Grille...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2142"/>
        <location filename="../src/ApplicationWindow.cpp" line="5320"/>
        <source>Y Axis Title</source>
        <translation>Etiquette de l&apos;axe Y</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2143"/>
        <location filename="../src/ApplicationWindow.cpp" line="5295"/>
        <source>X Axis Title</source>
        <translation>Etiquette de l&apos;axe X</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5794"/>
        <location filename="../src/ApplicationWindow.cpp" line="10915"/>
        <location filename="../src/ApplicationWindow.cpp" line="10946"/>
        <source>&amp;Worksheet</source>
        <translation>&amp;Feuille de calcul</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7615"/>
        <location filename="../src/ApplicationWindow.cpp" line="12748"/>
        <source>Yes</source>
        <translation>Oui</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7615"/>
        <location filename="../src/ApplicationWindow.cpp" line="12748"/>
        <source>No</source>
        <translation>Non</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6093"/>
        <location filename="../src/ApplicationWindow.cpp" line="6135"/>
        <location filename="../src/ApplicationWindow.cpp" line="7616"/>
        <source>Cancel</source>
        <translation>&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Edit function</source>
        <translation type="obsolete">QtiPlot - Modifier la fonction</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="687"/>
        <location filename="../src/ApplicationWindow.cpp" line="859"/>
        <location filename="../src/ApplicationWindow.cpp" line="7883"/>
        <location filename="../src/ApplicationWindow.cpp" line="7999"/>
        <source>&amp;Smooth</source>
        <translation>Li&amp;sser</translation>
    </message>
    <message>
        <source>&amp;FFT filter</source>
        <translation type="obsolete">&amp;Filtrage Numérique</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12484"/>
        <source>Hidden</source>
        <translation type="unfinished">Caché</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4906"/>
        <location filename="../src/ApplicationWindow.cpp" line="7769"/>
        <source>Maximized</source>
        <translation>Maximum</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4898"/>
        <source>Minimized</source>
        <translation>Minimum</translation>
    </message>
    <message>
        <source>&amp;Delete Window</source>
        <translation type="obsolete">Effacer la fenêtre</translation>
    </message>
    <message>
        <source>D&amp;epending Plots</source>
        <translation type="obsolete">Graphes dép&amp;endants</translation>
    </message>
    <message>
        <source>D&amp;epending 3D Plots</source>
        <translation type="obsolete">Graphes 3D Dép&amp;endants</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13528"/>
        <location filename="../src/ApplicationWindow.cpp" line="13546"/>
        <location filename="../src/ApplicationWindow.cpp" line="13552"/>
        <source>D&amp;epends on</source>
        <translation>Suivant</translation>
    </message>
    <message>
        <source>Function</source>
        <translation type="obsolete">Fonction</translation>
    </message>
    <message>
        <source>Re&amp;move pie curve</source>
        <translation type="obsolete">Effacer les secteurs</translation>
    </message>
    <message>
        <source>Anal&amp;yse</source>
        <translation type="obsolete">Anal&amp;yse</translation>
    </message>
    <message>
        <source>&amp;Paste layer</source>
        <translation type="obsolete">Coller la &amp;planche</translation>
    </message>
    <message>
        <source>&amp;Paste text</source>
        <translation type="obsolete">Coller le texte</translation>
    </message>
    <message>
        <source>&amp;Paste line/arrow</source>
        <translation type="obsolete">Coller la ligne/flêche</translation>
    </message>
    <message>
        <source>&amp;Paste image</source>
        <translation type="obsolete">Coller l&apos;image</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7930"/>
        <location filename="../src/ApplicationWindow.cpp" line="7934"/>
        <location filename="../src/ApplicationWindow.cpp" line="7938"/>
        <location filename="../src/ApplicationWindow.cpp" line="8046"/>
        <location filename="../src/ApplicationWindow.cpp" line="8050"/>
        <location filename="../src/ApplicationWindow.cpp" line="8054"/>
        <source>&amp;Layer</source>
        <translation>&amp;P&amp;lanche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7931"/>
        <location filename="../src/ApplicationWindow.cpp" line="7935"/>
        <location filename="../src/ApplicationWindow.cpp" line="7939"/>
        <location filename="../src/ApplicationWindow.cpp" line="8047"/>
        <location filename="../src/ApplicationWindow.cpp" line="8051"/>
        <location filename="../src/ApplicationWindow.cpp" line="8055"/>
        <source>&amp;Window</source>
        <translation>Fenêtre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7936"/>
        <location filename="../src/ApplicationWindow.cpp" line="8052"/>
        <source>E&amp;xport</source>
        <translation>E&amp;xporter</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7942"/>
        <location filename="../src/ApplicationWindow.cpp" line="8058"/>
        <source>&amp;Geometry...</source>
        <translation>&amp;Géométrie...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7943"/>
        <location filename="../src/ApplicationWindow.cpp" line="8059"/>
        <source>P&amp;roperties...</source>
        <translation>P&amp;ropriétés...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7945"/>
        <location filename="../src/ApplicationWindow.cpp" line="8061"/>
        <source>&amp;Delete Layer</source>
        <translation>&amp;Supprimer la planche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7917"/>
        <location filename="../src/ApplicationWindow.cpp" line="8033"/>
        <location filename="../src/ApplicationWindow.cpp" line="8080"/>
        <source>&amp;Paste Layer</source>
        <translation>Coller la &amp;planche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8097"/>
        <source>&amp;Copy Page</source>
        <translation>&amp;Copier la page</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8098"/>
        <source>E&amp;xport Page</source>
        <translation>E&amp;xporter la page</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8139"/>
        <source>&amp;Paste</source>
        <translation>Coller</translation>
    </message>
    <message>
        <source>Clea&amp;r Rows</source>
        <translation type="obsolete">Effacer les rangées</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8145"/>
        <source>&amp;Delete Rows</source>
        <translation>Supprimer les rangées</translation>
    </message>
    <message>
        <source>&amp;Plot 3D</source>
        <translation type="obsolete">Graphes 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8110"/>
        <source>&amp;Matrix...</source>
        <translation>&amp;Matrice...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8116"/>
        <source>Choose &amp;Data Set...</source>
        <translation>Remplacer &amp;Données...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8118"/>
        <source>Choose &amp;Matrix...</source>
        <translation>Choisir une &amp;matrice...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8121"/>
        <source>C&amp;lear</source>
        <translation>Supprimer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8128"/>
        <source>&amp;Copy Graph</source>
        <translation>&amp;Copier le graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8129"/>
        <source>&amp;Export</source>
        <translation>&amp;Exporter</translation>
    </message>
    <message>
        <source>Add time stamp</source>
        <translation type="obsolete">Ajouter Date et Heure</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10569"/>
        <location filename="../src/ApplicationWindow.cpp" line="11111"/>
        <source>Ctrl+ALT+T</source>
        <translation>Ctrl+Alt+T</translation>
    </message>
    <message>
        <source>Date &amp; Time </source>
        <translation type="obsolete">Date &amp; Temps </translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10671"/>
        <location filename="../src/ApplicationWindow.cpp" line="11186"/>
        <source>&amp;Low Pass...</source>
        <translation>Passe ba&amp;s...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10674"/>
        <location filename="../src/ApplicationWindow.cpp" line="11187"/>
        <source>&amp;High Pass...</source>
        <translation>Passe &amp;haut...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10677"/>
        <location filename="../src/ApplicationWindow.cpp" line="11188"/>
        <source>&amp;Band Pass...</source>
        <translation>Passe &amp;bande...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10680"/>
        <location filename="../src/ApplicationWindow.cpp" line="11189"/>
        <source>&amp;Band Block...</source>
        <translation>Réjecteur...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10683"/>
        <location filename="../src/ApplicationWindow.cpp" line="11190"/>
        <source>&amp;FFT...</source>
        <translation>&amp;FFT...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10686"/>
        <location filename="../src/ApplicationWindow.cpp" line="11191"/>
        <source>&amp;Savitzky-Golay...</source>
        <translation>&amp;Savitzky-Golay...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10689"/>
        <location filename="../src/ApplicationWindow.cpp" line="11192"/>
        <source>&amp;FFT Filter...</source>
        <translation>&amp;Filtre Passe bas...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10692"/>
        <location filename="../src/ApplicationWindow.cpp" line="11193"/>
        <source>Moving Window &amp;Average...</source>
        <translation>&amp;Moyenne glissante...</translation>
    </message>
    <message>
        <source>Edit 3D &amp;Surface</source>
        <translation type="obsolete">Modifier la surface 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10810"/>
        <location filename="../src/ApplicationWindow.cpp" line="11246"/>
        <source>&amp;Surface...</source>
        <translation>&amp;Surface...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10813"/>
        <location filename="../src/ApplicationWindow.cpp" line="11247"/>
        <source>&amp;Data Set...</source>
        <translation>Fixer les valeurs...</translation>
    </message>
    <message>
        <source>&amp;Smoothing</source>
        <translation type="obsolete">Li&amp;ssage</translation>
    </message>
    <message>
        <source>&amp;Add/Remove Curve</source>
        <translation type="obsolete">&amp;Ajouter/Enlever une courbe</translation>
    </message>
    <message>
        <source>Add &amp;Error Bars</source>
        <translation type="obsolete">Ajouter des barres d&apos;&amp;erreurs</translation>
    </message>
    <message>
        <source>Clea&amp;r Row</source>
        <translation type="obsolete">Effacer la &amp;rangée</translation>
    </message>
    <message>
        <source>&amp;Delete Row</source>
        <translation type="obsolete">Supprimer la rangée</translation>
    </message>
    <message>
        <source>Sort Columns</source>
        <translation type="obsolete">Trier les colonnes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10849"/>
        <location filename="../src/ApplicationWindow.cpp" line="11256"/>
        <source>Co&amp;rrelate</source>
        <translation>Corrélation</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10855"/>
        <location filename="../src/ApplicationWindow.cpp" line="11258"/>
        <source>&amp;Convolute</source>
        <translation>&amp;Convolution</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10858"/>
        <location filename="../src/ApplicationWindow.cpp" line="11259"/>
        <source>&amp;Deconvolute</source>
        <translation>&amp;Déconvolution</translation>
    </message>
    <message>
        <source>QtiPlot - File openning error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;ouverture du fichier</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist!</source>
        <translation type="obsolete">Le fichier : &lt;b&gt; %1 &lt;/b&gt; n&apos;existe pas !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="686"/>
        <location filename="../src/ApplicationWindow.cpp" line="846"/>
        <location filename="../src/ApplicationWindow.cpp" line="7874"/>
        <location filename="../src/ApplicationWindow.cpp" line="7990"/>
        <source>&amp;Translate</source>
        <translation>&amp;Translation</translation>
    </message>
    <message>
        <source>Set columns &amp;as</source>
        <translation type="obsolete">Fixer la colonne &amp;à</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13606"/>
        <source>Please select a Y column to plot!</source>
        <translation>Sélectionnez une colonne Y à tracer !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2925"/>
        <source>The selected columns have different numbers of rows!</source>
        <translation>Les colonnes sélectionnées ont un nombre de rangées différentes !</translation>
    </message>
    <message>
        <source>The selected error column is empty!</source>
        <translation type="obsolete">La colonne d&apos;erreur sélectionnée est vide !</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt; %1 &lt;/b&gt; was not created using QtiPlot!</source>
        <translation type="obsolete">Le fichier : &lt;b&gt; %1 &lt;/b&gt; n&apos;a pas été créé avec QtiPlot !</translation>
    </message>
    <message>
        <source>QtiPlot - Open Project</source>
        <translation type="obsolete">QtiPlot - Ouvrir un projet</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3419"/>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; is the current file!</source>
        <translation>Le fichier : &lt;b&gt; %1 &lt;/b&gt; est le fichier actuel !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3432"/>
        <location filename="../src/ApplicationWindow.cpp" line="3994"/>
        <location filename="../src/ApplicationWindow.cpp" line="11871"/>
        <location filename="../src/ApplicationWindow.cpp" line="12050"/>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; doesn&apos;t exist!</source>
        <translation>Le fichier : &lt;b&gt; %1 &lt;/b&gt; n&apos;existe pas !</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; is not a QtiPlot or Origin project file!</source>
        <translation type="obsolete">Le fichier : &lt;b&gt;%1&lt;/b&gt; n&apos;est pas un fichier QtiPlot ou un projet Origin !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3505"/>
        <source>The file: &lt;b&gt; %1 &lt;/b&gt; &lt;p&gt;does not exist anymore!&lt;p&gt;It will be removed from the list.</source>
        <translation>Un fichier nommé &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;n&apos;existe plus. Il sera effacé de la liste.</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt; %1 &lt;/b&gt; is the current file!</source>
        <translation type="obsolete">Le fichier : &lt;b&gt; %1 &lt;/b&gt; est le fichier actuel !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4681"/>
        <location filename="../src/ApplicationWindow.cpp" line="4736"/>
        <location filename="../src/ApplicationWindow.cpp" line="5048"/>
        <source>Could not write to file: &lt;br&gt;&lt;h4&gt; %1 &lt;/h4&gt;&lt;p&gt;Please verify that you have the right to write to this location!</source>
        <translation>Impossible d&apos;enregistrer le fichier &lt;br&gt;&lt;h4&gt; %1 &lt;/h4&gt;&lt;p&gt;. Vérifiez que vous avez les droits requis pour écrire à cet emplacement !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4822"/>
        <source>Could not write to file: &lt;br&gt;&lt;h4&gt;%1&lt;/h4&gt;&lt;p&gt;Please verify that you have the right to write to this location!</source>
        <translation>Impossible d&apos;enregistrer le fichier : &lt;br&gt;&lt;h4&gt; %1 &lt;/h4&gt;&lt;p&gt;. Vérifiez que vous avez les droits requis pour écrire à cet emplacement !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5454"/>
        <location filename="../src/ApplicationWindow.cpp" line="6163"/>
        <source>Choose a filename to save under</source>
        <translation>Choisissez un nom pour sauvegarder ce fichier</translation>
    </message>
    <message>
        <source>Set as</source>
        <translation type="obsolete">Fixer à </translation>
    </message>
    <message>
        <source>QtiPlot - Empty plot</source>
        <translation type="obsolete">QtiPlot - Graphe Vide</translation>
    </message>
    <message>
        <source>There are actually  no curves on the active layer!</source>
        <translation type="obsolete">Aucune courbe sur la planche active !</translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6092"/>
        <location filename="../src/ApplicationWindow.cpp" line="6134"/>
        <source>This will modify the data in the worksheets!
Are you sure you want to continue?</source>
        <translation>Ceci modifiera les données dans les tables !
Etes vous sûr de vouloir continuer ?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6093"/>
        <location filename="../src/ApplicationWindow.cpp" line="6135"/>
        <source>Continue</source>
        <translation>Continuer</translation>
    </message>
    <message>
        <source>Click on plot or move cursor to display coordinates!</source>
        <translation type="obsolete">Cliquez sur le graphe ou déplacez le curseur pour afficher les coordonnées !</translation>
    </message>
    <message>
        <source>Click on plot to display information!</source>
        <translation type="obsolete">Cliquez sur le graphe pour afficher les informations !</translation>
    </message>
    <message>
        <source>QtiPlot - Help Files Not Found!</source>
        <translation type="obsolete">QtiPlot - Fichiers d&apos;aide non trouvés !</translation>
    </message>
    <message>
        <source>Please indicate the location of the help file!&lt;br&gt;&lt;br&gt;&lt;p&gt;The manual can be downloaded from the following internet address:&lt;/p&gt;&lt;p&gt;&lt;font color=blue&gt;&apos;http://soft.proindependent.com/manuals.html&apos;&lt;/font&gt;&lt;/p&gt;</source>
        <translation type="obsolete">Indiquez l&apos;emplacement du fichier d&apos;aide ! &lt;br&gt;&lt;br&gt;&lt;p&gt;Le manuel peut être téléchargé de l&apos;adresse Internet suivante : &lt;/p&gt;&lt;p&gt;&lt;font color=blue&gt;&apos;http://soft.proindependent.com/manuals.html&apos;&lt;/font&gt;&lt;/p&gt;</translation>
    </message>
    <message>
        <source>QtiPlot - Help Browser</source>
        <translation type="obsolete">QtiPlot - Navigateur d&apos;aide</translation>
    </message>
    <message>
        <source>Curve:</source>
        <translation type="obsolete">Courbe :</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10861"/>
        <location filename="../src/ApplicationWindow.cpp" line="11260"/>
        <source>&amp;Horizontal</source>
        <translation>&amp;Horizontale</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10864"/>
        <location filename="../src/ApplicationWindow.cpp" line="11261"/>
        <source>&amp;Vertical</source>
        <translation>&amp;Verticale</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12456"/>
        <source>&amp;None</source>
        <translation>Aucu&amp;n</translation>
    </message>
    <message>
        <source>Too many command line options (maximum accepted is 2)!</source>
        <translation type="obsolete">Trop d&apos;options en ligne de comnade (2 maximum) !</translation>
    </message>
    <message>
        <source>&lt;b&gt; %1 &lt;/b&gt;: Unknown command line option or the file doesn&apos;t exist!</source>
        <translation type="obsolete">&lt;b&gt; %1 &lt;/b&gt; : Option en ligne de commande inconnue ou le fichier n&apos;existe pas !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="195"/>
        <location filename="../src/ApplicationWindow.cpp" line="12709"/>
        <location filename="../src/ApplicationWindow.cpp" line="13034"/>
        <source>Folder</source>
        <translation>Dossier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="217"/>
        <source>UNTITLED</source>
        <translation>SANS TITRE</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="420"/>
        <location filename="../src/ApplicationWindow.cpp" line="673"/>
        <source>Edit</source>
        <translation>Edition</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="548"/>
        <location filename="../src/ApplicationWindow.cpp" line="11312"/>
        <source>Ctrl+ALT+M</source>
        <translation>Ctrl+Alt+M</translation>
    </message>
    <message>
        <source>QtiPlot - untitled</source>
        <translation type="obsolete">QtiPlot - Sans nom</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="188"/>
        <location filename="../src/ApplicationWindow.cpp" line="664"/>
        <source>Project Explorer</source>
        <translation>Explorateur de projets</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="242"/>
        <location filename="../src/ApplicationWindow.cpp" line="665"/>
        <source>Results Log</source>
        <translation>Historique des résultats</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="898"/>
        <source>Fit &amp;Multi-peak</source>
        <translation>Fit &amp;Multi-pics</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1703"/>
        <source>There are no available columns with plot designation set to Z!</source>
        <translation>Aucune colonne disponible pour le graphe de la colonne Z !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2492"/>
        <source>The table &apos;%1&apos; already exists. It has been renamed &apos;%2&apos;.</source>
        <translation>La table &apos;%14 existe déjà. Elle a été renommée en &apos;%2&apos;.</translation>
    </message>
    <message>
        <source>The matrix &apos;%1&apos; already exists. It has been renamed &apos;%2&apos;.</source>
        <translation type="obsolete">La matrice &apos;%1&apos; existe déjà. Elle a été renommée en &apos;%2&apos;.</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2645"/>
        <source>Determinant of </source>
        <translation>Déterminant de </translation>
    </message>
    <message>
        <source>QtiPlot - File opening error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;ouverture du fichier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3600"/>
        <source>The file &lt;b&gt;%1&lt;/b&gt; is corrupted, but there exists a backup copy.&lt;br&gt;Do you want to open the backup instead?</source>
        <translation>Le fichier &lt;b&gt;%1&lt;/b&gt; est corrompu mais une copie de restauration existe.&lt;br&gt;Voulez vous plutôt ouvrir cette copie ?</translation>
    </message>
    <message>
        <source>QtiPlot - Opening file</source>
        <translation type="obsolete">QtiPlot - Ouverture du fichier</translation>
    </message>
    <message>
        <source>QtiPlot - Open Template File</source>
        <translation type="obsolete">QtiPlot - Ouvrir un modèle</translation>
    </message>
    <message>
        <source>graph1</source>
        <translation type="obsolete">graph1</translation>
    </message>
    <message>
        <source>table1</source>
        <translation type="obsolete">table1</translation>
    </message>
    <message>
        <source>Matrix1</source>
        <translation type="obsolete">Matrice1</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; is not a QtiPlot template file!</source>
        <translation type="obsolete">Le fichier &lt;b&gt;%1&lt;/b&gt; n&apos;est pas un modèle QtiPlot !</translation>
    </message>
    <message>
        <source>QtiPlot project</source>
        <translation type="obsolete">Projet QtiPlot</translation>
    </message>
    <message>
        <source>Compressed QtiPlot project</source>
        <translation type="obsolete">Projet QtiPlot compréssé</translation>
    </message>
    <message>
        <source>Origin project</source>
        <translation type="obsolete">Projet Origin</translation>
    </message>
    <message>
        <source>All files</source>
        <translation type="obsolete">Tous les fichiers</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4972"/>
        <source>Save Project As</source>
        <translation>Sauvegarder le projet sous</translation>
    </message>
    <message>
        <source>QtiPlot Matrix Template</source>
        <translation type="obsolete">Modèle de Matrice Qtiplot </translation>
    </message>
    <message>
        <source>QtiPlot 2D Plot Template</source>
        <translation type="obsolete">Modèle de Graphe 2D Qtiplot </translation>
    </message>
    <message>
        <source>QtiPlot Table Template</source>
        <translation type="obsolete">Modèle de Table Qtiplot </translation>
    </message>
    <message>
        <source>QtiPlot 3D Surface Template</source>
        <translation type="obsolete">Modèle de Graphe 3D Qtiplot </translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5032"/>
        <source>Save Window As Template</source>
        <translation>Sauvegarder la fenêtre comme modèle</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5101"/>
        <location filename="../src/ApplicationWindow.cpp" line="12543"/>
        <source>Please enter a valid name!</source>
        <translation>Donnez un nom valide !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5106"/>
        <source>The name you chose is not valid: only letters and digits are allowed!</source>
        <translation>Le nom que vous avez choisi n&apos;est pas valide : seuls les lettres et les caractères alphanumériques sont autorisés !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5107"/>
        <location filename="../src/ApplicationWindow.cpp" line="5115"/>
        <location filename="../src/ApplicationWindow.cpp" line="5124"/>
        <location filename="../src/ApplicationWindow.cpp" line="12554"/>
        <source>Please choose another name!</source>
        <translation>Choisissez un autre nom !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12554"/>
        <source>Name already exists!</source>
        <translation type="unfinished">Ce nom existe déjà !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5124"/>
        <source>The table name must be different from the names of its columns!</source>
        <translation>Le nom de la table doit être différent des noms de colonnes !</translation>
    </message>
    <message>
        <source>QtiPlot - X Axis Title</source>
        <translation type="obsolete">QtiPlot - Titre Axe X</translation>
    </message>
    <message>
        <source>QtiPlot - Y Axis Title</source>
        <translation type="obsolete">QtiPlot - Titre Axe Y</translation>
    </message>
    <message>
        <source>QtiPlot - Right Axis Title</source>
        <translation type="obsolete">QtiPlot - Titre Axe de Droite</translation>
    </message>
    <message>
        <source>QtiPLot - Top Axis Title</source>
        <translation type="obsolete">QtiPlot - Titre Axe de Gauche</translation>
    </message>
    <message>
        <source>There are actually no curves on the active layer!</source>
        <translation type="obsolete">Aucune courbe disponible sur la planche active !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7697"/>
        <location filename="../src/ApplicationWindow.cpp" line="10480"/>
        <location filename="../src/ApplicationWindow.cpp" line="11032"/>
        <source>&amp;Delete Selection</source>
        <translation>Effacer la sélection</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7712"/>
        <location filename="../src/ApplicationWindow.cpp" line="12449"/>
        <source>New &amp;Window</source>
        <translation>Nouvelle fenêtre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7714"/>
        <location filename="../src/ApplicationWindow.cpp" line="12452"/>
        <source>New F&amp;older</source>
        <translation>Nouveau D&amp;ossier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7716"/>
        <source>Auto &amp;Column Width</source>
        <translation>Largeur automatique</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8141"/>
        <source>&amp;Insert Row</source>
        <translation>&amp;Insérer une rangée</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8142"/>
        <source>&amp;Insert Column</source>
        <translation>&amp;Insérer une colonne</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8149"/>
        <source>&amp;Delete Columns</source>
        <translation>Effacer les colonnes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10401"/>
        <location filename="../src/ApplicationWindow.cpp" line="10961"/>
        <source>New &amp;Graph</source>
        <translation>Graphe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10405"/>
        <location filename="../src/ApplicationWindow.cpp" line="10965"/>
        <source>New &amp;Note / Script</source>
        <translation>Commentaires</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10421"/>
        <location filename="../src/ApplicationWindow.cpp" line="10982"/>
        <source>Ctrl+ALT+Z</source>
        <translation>Ctrl+Alt+Z</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10443"/>
        <source>Open Temp&amp;late...</source>
        <translation>Ouvrir un modè&amp;le...</translation>
    </message>
    <message>
        <source>Save as &amp;Template...</source>
        <translation type="obsolete">Sauvegarder comme modèle...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10622"/>
        <location filename="../src/ApplicationWindow.cpp" line="11148"/>
        <source>Vectors XY&amp;AM</source>
        <translation>Vecteurs XY&amp;AM</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10716"/>
        <location filename="../src/ApplicationWindow.cpp" line="11201"/>
        <source>Fit &amp;Boltzmann (Sigmoidal)</source>
        <translation>Ajustement de &amp;Boltzmann (Sigmoïdal)</translation>
    </message>
    <message>
        <source>&amp;Curves ...</source>
        <translation type="obsolete">&amp;Courbes...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10732"/>
        <location filename="../src/ApplicationWindow.cpp" line="11209"/>
        <source>&amp;Scales...</source>
        <translation>Echelle&amp;s...</translation>
    </message>
    <message>
        <source>&amp;About QtiPlot</source>
        <translation type="obsolete">&amp;A propos de QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10867"/>
        <location filename="../src/ApplicationWindow.cpp" line="11263"/>
        <source>&amp;Box Plot</source>
        <translation>Graphe de boîtes</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10871"/>
        <location filename="../src/ApplicationWindow.cpp" line="11266"/>
        <source>&amp;Gaussian...</source>
        <translation>&amp;Gaussienne...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10874"/>
        <location filename="../src/ApplicationWindow.cpp" line="11267"/>
        <source>&amp;Lorentzian...</source>
        <translation>&amp;Lorentzienne...</translation>
    </message>
    <message>
        <source>&amp;Search for Updates</source>
        <translation type="obsolete">Recherche de mi&amp;ses à jour</translation>
    </message>
    <message>
        <source>&amp;QtiPlot Homepage</source>
        <translation type="obsolete">Page d&apos;accueil de &amp;QtiPlot</translation>
    </message>
    <message>
        <source>Download &amp;manual</source>
        <translation type="obsolete">Télécharger le &amp;manuel</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10892"/>
        <location filename="../src/ApplicationWindow.cpp" line="11273"/>
        <source>&amp;Translations</source>
        <translation>&amp;Traductions</translation>
    </message>
    <message>
        <source>Make a &amp;donation</source>
        <translation type="obsolete">Faire un &amp;don</translation>
    </message>
    <message>
        <source>Technical &amp;support</source>
        <translation type="obsolete">&amp;Support technique</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10958"/>
        <source>Open a new project</source>
        <translation>Nouveau projet</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10962"/>
        <source>Create an empty 2D plot</source>
        <translation>Créer un graphe 2D vide</translation>
    </message>
    <message>
        <source>Create an empty note window</source>
        <translation type="obsolete">Créer une fenêtre de commentaires vide</translation>
    </message>
    <message>
        <source>New Table</source>
        <translation type="obsolete">Nouvelle table</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10977"/>
        <source>Create a new 2D function plot</source>
        <translation>Créer un nouveau graphe de fonction 2D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10981"/>
        <source>Create a new 3D surface plot</source>
        <translation>Créer un nouveau graphe 3D</translation>
    </message>
    <message>
        <source>Save Project</source>
        <translation type="obsolete">Sauvegarder le projet</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10999"/>
        <source>Open Te&amp;mplate...</source>
        <translation>Ouvrir un &amp;modèle...</translation>
    </message>
    <message>
        <source>Open Template</source>
        <translation type="obsolete">Ouvrir un modèle</translation>
    </message>
    <message>
        <source>Save Window as Template</source>
        <translation type="obsolete">Sauvegarder la fenêtre comme modèle</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11010"/>
        <source>Undo changes</source>
        <translation>Annuler</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11014"/>
        <source>Redo changes</source>
        <translation>Refaire</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11021"/>
        <source>Cut selection</source>
        <translation>Couper</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11025"/>
        <source>Copy selection</source>
        <translation>Copier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11029"/>
        <source>Paste selection</source>
        <translation>Coller</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11033"/>
        <source>Delete selection</source>
        <translation>Effacer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11073"/>
        <source>Print window</source>
        <translation>Imprimer la fenêtre</translation>
    </message>
    <message>
        <source>&amp;Vectors XYXY</source>
        <translation type="obsolete">&amp;Vecteurs XYXY</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11146"/>
        <source>Vectors XYXY</source>
        <translation>Vecteurs XYXY</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11149"/>
        <source>Vectors XYAM</source>
        <translation>Vecteurs XYAM</translation>
    </message>
    <message>
        <source>&amp;Curves...</source>
        <translation type="obsolete">&amp;Courbes...</translation>
    </message>
    <message>
        <source>Box and Whiskers Plot</source>
        <translation type="obsolete">Graphe Whiskers</translation>
    </message>
    <message>
        <source>Double-click on plot to select a data point!</source>
        <translation type="obsolete">Double-cliquez pour sélectionner un point !</translation>
    </message>
    <message>
        <source>QtiPlot - Enter the number of peaks</source>
        <translation type="obsolete">QtiPlot - Donnez le nombre de pics</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11752"/>
        <source>Peaks</source>
        <translation>Pics</translation>
    </message>
    <message>
        <source>Move cursor and click to select a point and double-click/press &apos;Enter&apos; to set the position of a peak!</source>
        <translation type="obsolete">Déplacer le curseur et cliquez poour sélectionner un point et double-qliquez (ou tapez &apos;Entrée&apos;) pour fixer la position d&apos;un Pic !</translation>
    </message>
    <message>
        <source>Sorry, QtiPlot couldn&apos;t start the default browser! Please start a browser manually and visit the following link</source>
        <translation type="obsolete">Désolé, QtiPlot ne parvient pas démarrer le navigateur ! Lancez votre navigateur manuellement et visitez le lien suivant</translation>
    </message>
    <message>
        <source>English</source>
        <translation type="obsolete">Français</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11845"/>
        <source>&lt;b&gt; %1 &lt;/b&gt;: Wrong locale option or no translation available!</source>
        <translation type="unfinished">&lt;b&gt; %1 &lt;/b&gt; : Mauvaise option de langue !</translation>
    </message>
    <message>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; is not a QtiPlot project file!</source>
        <translation type="obsolete">Le fichier &lt;b&gt;%1&lt;/b&gt; n&apos;est pas un fichier projet QtiPlot !</translation>
    </message>
    <message>
        <source>QtiPlot - File Backup Error</source>
        <translation type="obsolete">QtiPlot - Erreur de sauvegarde automatique</translation>
    </message>
    <message>
        <source>Cannot make a backup copy of &lt;b&gt;%1&lt;/b&gt; (to %2).&lt;br&gt;If you ignore this, you run the risk of &lt;b&gt;data loss&lt;/b&gt;.</source>
        <translation type="obsolete">Impossible de faire une sauvagarde de &lt;b&gt;%1&lt;/b&gt; (vers %2).&lt;br&gt;Si vous ignorez ce message, vous prenez le risque de &lt;b&gt;prendre des données&lt;/b&gt;.</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12310"/>
        <source>The file: &lt;br&gt;&lt;b&gt;%1&lt;/b&gt; is opened in read-only mode</source>
        <translation type="unfinished">Le fichier &lt;br&gt;&lt;b&gt;%1&lt;/b&gt; est ouvert en lecture seule</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12418"/>
        <source>&amp;Find...</source>
        <translation type="unfinished">Chercher...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12420"/>
        <source>App&amp;end Project...</source>
        <translation type="unfinished">Ajout&amp;er un projet...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12422"/>
        <source>Save &amp;As Project...</source>
        <translation type="unfinished">S&amp;auvegarder comme projet...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10440"/>
        <location filename="../src/ApplicationWindow.cpp" line="10997"/>
        <location filename="../src/ApplicationWindow.cpp" line="12424"/>
        <source>Save Project &amp;As...</source>
        <translation type="unfinished">E&amp;nregistrer le projet sous...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12429"/>
        <source>&amp;Show All Windows</source>
        <translation type="unfinished">Montrer toutes les fenêtres</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12430"/>
        <source>&amp;Hide All Windows</source>
        <translation type="unfinished">Cac&amp;her toutes les fenêtres</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12436"/>
        <source>&amp;Delete Folder</source>
        <translation type="unfinished">Supprimer le dossier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12456"/>
        <source>&amp;Windows in Active Folder</source>
        <translation type="unfinished">Dans le dossier actif</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12456"/>
        <source>Windows in &amp;Active Folder &amp;&amp; Subfolders</source>
        <translation type="unfinished">Dans le dossier actif et les sous-dossiers</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12463"/>
        <source>&amp;View Windows</source>
        <translation type="unfinished">Afficher les fenêtres</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12667"/>
        <source>Project</source>
        <translation type="unfinished">Projet</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12670"/>
        <location filename="../src/ApplicationWindow.cpp" line="12710"/>
        <location filename="../src/ApplicationWindow.cpp" line="13019"/>
        <source>Path</source>
        <translation type="unfinished">Chemin</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12677"/>
        <location filename="../src/ApplicationWindow.cpp" line="12711"/>
        <source>Contents</source>
        <translation type="unfinished">Contenu</translation>
    </message>
    <message>
        <source>Windows</source>
        <translation type="obsolete">Fenêtres</translation>
    </message>
    <message>
        <source>Folders</source>
        <translation type="obsolete">Dossiers</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12687"/>
        <source>Modified</source>
        <translation type="unfinished">Modifié</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12692"/>
        <location filename="../src/ApplicationWindow.cpp" line="12717"/>
        <location filename="../src/ApplicationWindow.cpp" line="12986"/>
        <source>Properties</source>
        <translation type="unfinished">Propriétés</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12727"/>
        <source>New Folder</source>
        <translation type="unfinished">Nouveau Dossier</translation>
    </message>
    <message>
        <source>QtiPlot - Delete folder?</source>
        <translation type="obsolete">QtiPlot - Supprimer le dossier ?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12747"/>
        <source>Delete folder &apos;%1&apos; and all the windows it contains?</source>
        <translation type="unfinished">Supprimer le dossier &apos;%1&apos; et toutes les fenêtres qu&apos;il contient ?</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12962"/>
        <location filename="../src/ApplicationWindow.cpp" line="13007"/>
        <source>Note</source>
        <translation type="unfinished">Commentaire</translation>
    </message>
    <message>
        <source>Plot 3D</source>
        <translation type="obsolete">Graphe 3D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13021"/>
        <source>Status</source>
        <translation type="unfinished">Etat</translation>
    </message>
    <message>
        <source>QtiPlot - No match found</source>
        <translation type="obsolete">QtiPlot - Pas de correspondance</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13096"/>
        <source>Sorry, no match found for string: &apos;%1&apos;</source>
        <translation type="unfinished">Désolé, &apos;%1&apos; introuvable</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13117"/>
        <source>Cannot move an object to itself!</source>
        <translation type="unfinished">Impossible de déplacer un objet vers lui-même !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13123"/>
        <source>Cannot move a parent folder into a child folder!</source>
        <translation type="unfinished">Ne peux pas déplacer un dossier père vers un dossier fils !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13138"/>
        <source>The destination folder already contains a folder called &apos;%1&apos;! Folder skipped!</source>
        <translation type="unfinished">Le dossier de destination contient déjà un dossier nomé &apos;%1&apos;. Le dossier n&apos;as pas été déplacé!</translation>
    </message>
    <message>
        <source>QtiPlot - Skipped Moving Folder</source>
        <translation type="obsolete">QtiPlot - </translation>
    </message>
    <message>
        <source>Skipped Moving Folder</source>
        <translation type="obsolete">Dossier inchangé!</translation>
    </message>
    <message>
        <source>Key_Delete</source>
        <translation type="obsolete">Suppr</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2446"/>
        <source>pixels</source>
        <translation>pixels</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2447"/>
        <source>pixel intensity (a.u.)</source>
        <translation>Intensité (u.a)</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="254"/>
        <location filename="../src/ApplicationWindow.cpp" line="667"/>
        <source>Scripting Console</source>
        <translation>Console d&apos;édition de scripts</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="509"/>
        <location filename="../src/ApplicationWindow.cpp" line="11292"/>
        <source>&amp;Zoom In</source>
        <translation>&amp;Zoom +</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="510"/>
        <location filename="../src/ApplicationWindow.cpp" line="11293"/>
        <source>Ctrl++</source>
        <translation>Ctrl++</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11296"/>
        <source>Zoom &amp;Out</source>
        <translation>Zo&amp;om -</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="517"/>
        <location filename="../src/ApplicationWindow.cpp" line="11297"/>
        <source>Ctrl+-</source>
        <translation>Ctrl+-</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="489"/>
        <location filename="../src/ApplicationWindow.cpp" line="11323"/>
        <source>Draw &amp;Arrow</source>
        <translation>&amp;Ajouter une flèche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="490"/>
        <location filename="../src/ApplicationWindow.cpp" line="11324"/>
        <source>CTRL+ALT+A</source>
        <translation>Ctrl+Alt+A</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="496"/>
        <location filename="../src/ApplicationWindow.cpp" line="11327"/>
        <source>Draw &amp;Line</source>
        <translation>Ajouter une &amp;ligne</translation>
    </message>
    <message>
        <source>This operation cannot be performed on curves plotted from columns having a non-numerical format.</source>
        <translation type="obsolete">Cette opération ne peut être réalisée sur des courbes ayant des colonnes au format non numérique.</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">Texte</translation>
    </message>
    <message>
        <source>Data</source>
        <translation type="obsolete">Données</translation>
    </message>
    <message>
        <source>Comma Separated Values</source>
        <translation type="obsolete">Valeurs séparées par une virgule</translation>
    </message>
    <message>
        <source>QtiPlot - Import ASCII File</source>
        <translation type="obsolete">QtiPlot - Importer un fichier ASCII</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3660"/>
        <source>Window</source>
        <translation>Fenêtre</translation>
    </message>
    <message>
        <source>QtiPlot - Row selection error</source>
        <translation type="obsolete">QtiPlot - Erreur de sélection de rangée</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5577"/>
        <source>Please select a row first!</source>
        <translation>Sélectionnez d&apos;abord une rangée !</translation>
    </message>
    <message>
        <source>X</source>
        <translation type="obsolete">X</translation>
    </message>
    <message>
        <source>Y</source>
        <translation type="obsolete">Y</translation>
    </message>
    <message>
        <source>Z</source>
        <translation type="obsolete">Z</translation>
    </message>
    <message>
        <source>X Error</source>
        <translation type="obsolete">Erreur en X</translation>
    </message>
    <message>
        <source>Y Error</source>
        <translation type="obsolete">Erreur en Y</translation>
    </message>
    <message>
        <source>Recalculate</source>
        <translation type="obsolete">Recalculer</translation>
    </message>
    <message>
        <source>Click on data point to display information!</source>
        <translation type="obsolete">Cliquez sur un point pour afficher l&apos;information !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2071"/>
        <location filename="../src/ApplicationWindow.cpp" line="2091"/>
        <location filename="../src/ApplicationWindow.cpp" line="6723"/>
        <source>Images</source>
        <translation>Images</translation>
    </message>
    <message>
        <source>QtiPlot - Insert image from file</source>
        <translation type="obsolete">QtiPlot - insérer une image à partir d&apos;un fichier</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7131"/>
        <source>Empty 3D surface plots cannot be duplicated!</source>
        <translation>Les courbes de surfaces 3D vides ne peuvent pas être dupliquées !</translation>
    </message>
    <message>
        <source>QtiPlot - Set the number of pixels to average</source>
        <translation type="obsolete">QtiPlot - Fixez le nombre de pixels à moyenner</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9017"/>
        <source>Number of averaged pixels</source>
        <translation>Nombre de pixels moyennés</translation>
    </message>
    <message>
        <source>Scripting &amp;Console</source>
        <translation type="obsolete">&amp;Console d&apos;édition de scripts</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10510"/>
        <location filename="../src/ApplicationWindow.cpp" line="11060"/>
        <source>Alt+G</source>
        <translation>Alt+G</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10561"/>
        <location filename="../src/ApplicationWindow.cpp" line="11103"/>
        <source>Ctrl+Shift+R</source>
        <translation>Ctrl+Shift+R</translation>
    </message>
    <message>
        <source>&amp;X</source>
        <translation type="obsolete">&amp;X</translation>
    </message>
    <message>
        <source>&amp;Y</source>
        <translation type="obsolete">&amp;Y</translation>
    </message>
    <message>
        <source>&amp;Z</source>
        <translation type="obsolete">&amp;Z</translation>
    </message>
    <message>
        <source>X E&amp;rror</source>
        <translation type="obsolete">E&amp;rreur en X</translation>
    </message>
    <message>
        <source>Y &amp;Error</source>
        <translation type="obsolete">&amp;Erreur en Y</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10877"/>
        <location filename="../src/ApplicationWindow.cpp" line="11269"/>
        <source>Search for &amp;Updates</source>
        <translation>Recherche de mises à jour</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11044"/>
        <source>&amp;Console</source>
        <translation>&amp;Console</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11045"/>
        <source>Show Scripting console</source>
        <translation>Afficher la console d&apos;édition de scripts</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11294"/>
        <source>Zoom In</source>
        <translation>Zoom +</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11298"/>
        <source>Zoom Out</source>
        <translation>Zoom -</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11325"/>
        <source>Draw arrow</source>
        <translation>Désiner une flèche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="432"/>
        <location filename="../src/ApplicationWindow.cpp" line="671"/>
        <location filename="../src/ApplicationWindow.cpp" line="1840"/>
        <location filename="../src/ApplicationWindow.cpp" line="1876"/>
        <location filename="../src/ApplicationWindow.cpp" line="1888"/>
        <location filename="../src/ApplicationWindow.cpp" line="1929"/>
        <location filename="../src/ApplicationWindow.cpp" line="1942"/>
        <location filename="../src/ApplicationWindow.cpp" line="1962"/>
        <location filename="../src/ApplicationWindow.cpp" line="2016"/>
        <location filename="../src/ApplicationWindow.cpp" line="2111"/>
        <location filename="../src/ApplicationWindow.cpp" line="2189"/>
        <location filename="../src/ApplicationWindow.cpp" line="2228"/>
        <location filename="../src/ApplicationWindow.cpp" line="2339"/>
        <location filename="../src/ApplicationWindow.cpp" line="2351"/>
        <location filename="../src/ApplicationWindow.cpp" line="4046"/>
        <location filename="../src/ApplicationWindow.cpp" line="7120"/>
        <location filename="../src/ApplicationWindow.cpp" line="7135"/>
        <location filename="../src/ApplicationWindow.cpp" line="11452"/>
        <location filename="../src/ApplicationWindow.cpp" line="11522"/>
        <location filename="../src/ApplicationWindow.cpp" line="12966"/>
        <location filename="../src/ApplicationWindow.cpp" line="13012"/>
        <location filename="../src/ApplicationWindow.h" line="498"/>
        <source>Graph</source>
        <translation>Graphe</translation>
    </message>
    <message>
        <source>QtiPlot - Python Script Window</source>
        <translation type="obsolete">QtiPlot - Fenêtre d&apos;édition de Script</translation>
    </message>
    <message>
        <source>S&amp;cripting</source>
        <translation type="obsolete">Script</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1761"/>
        <source>&lt;h4&gt;There are no matrices available in this project.&lt;/h4&gt;&lt;p&gt;&lt;h4&gt;Please create a matrix and try again!&lt;/h4&gt;</source>
        <translation>&lt;h4&gt;Il n&apos;y a pas de matrices disponibles dans ce projet.&lt;/h4&gt;&lt;p&gt;&lt;h4&gt;Veuillez créer une matrice et réessayer !&lt;/h4&gt;</translation>
    </message>
    <message>
        <source>QtiPlot - Renamed Window</source>
        <translation type="obsolete">Qtiplot - Fenêtre renommée</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2582"/>
        <location filename="../src/ApplicationWindow.cpp" line="2593"/>
        <source>Notes</source>
        <translation>Commentaires</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3650"/>
        <source>The file &quot;%1&quot; was created using &quot;%2&quot; as scripting language.

Initializing support for this language FAILED; I&apos;m using &quot;%3&quot; instead.
Various parts of this file may not be displayed as expected.</source>
        <translation>Le fichier &quot;%1&quot; a été crée en utilisant &quot;%2&quot; comme langage de script.

L&apos;initialisation a échouée. &quot;%3&quot; est utilisé en substitution.
Quelques parties de ce fichier peuvent ne pas être affichés comme attendu.</translation>
    </message>
    <message>
        <source>QtiPlot - Scripting Error</source>
        <translation type="obsolete">QtiPlot - Erreur de Script</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3972"/>
        <source>Scripting language &quot;%1&quot; failed to initialize.</source>
        <translation>L&apos;initialisation du langage de script &quot;%1&quot; a échouée.</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4755"/>
        <source>Choose a directory to export the graphs to</source>
        <translation>Choisir un répertoire vers lequel exporter les graphes</translation>
    </message>
    <message>
        <source>Python Source</source>
        <translation type="obsolete">Source Python</translation>
    </message>
    <message>
        <source>All Files</source>
        <translation type="obsolete">Tous les fichiers</translation>
    </message>
    <message>
        <source>Save Notes As...</source>
        <translation type="obsolete">Sauvegarder les commentaires sous...</translation>
    </message>
    <message>
        <source>QtiPlot 2D Graph Template</source>
        <translation type="obsolete">Modèle de graphe QtiPlot 2D</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10936"/>
        <location filename="../src/ApplicationWindow.cpp" line="10948"/>
        <source>&amp;Edit Function...</source>
        <translation>Modifi&amp;er la fonction...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10912"/>
        <location filename="../src/ApplicationWindow.cpp" line="10945"/>
        <source>&amp;Plot details...</source>
        <translation>Détails du graphe...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13500"/>
        <source>D&amp;epending Graphs</source>
        <translation>Graphes dép&amp;endants</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13514"/>
        <source>D&amp;epending 3D Graphs</source>
        <translation>Graphe 3D dép&amp;endants</translation>
    </message>
    <message>
        <source>&amp;Graph 3D</source>
        <translation type="obsolete">&amp;Graphe 3D</translation>
    </message>
    <message>
        <source>Choose the location of the QtiPlot help folder!</source>
        <translation type="obsolete">Choisir l&apos;emplacement pour le répertoire du fichier d&apos;aide !</translation>
    </message>
    <message>
        <source>Open File</source>
        <translation type="obsolete">Ouvrir le fichier</translation>
    </message>
    <message>
        <source>Alt+F4</source>
        <translation type="obsolete">Alt+F4</translation>
    </message>
    <message>
        <source>Ctrl+Alt+O</source>
        <translation type="obsolete">Ctrl+Alt+O</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10910"/>
        <location filename="../src/ApplicationWindow.cpp" line="11287"/>
        <source>Ctrl+Return</source>
        <translation>Ctrl+Entrée</translation>
    </message>
    <message>
        <source>&amp;Go to Row...</source>
        <translation type="obsolete">Aller à la rangée...</translation>
    </message>
    <message>
        <source>Ctrl+Alt+G</source>
        <translation type="obsolete">Ctrl+Alt+G</translation>
    </message>
    <message>
        <source>Clear</source>
        <translation type="obsolete">Effacer</translation>
    </message>
    <message>
        <source>Scripting &amp;language</source>
        <translation type="obsolete">Langage de script</translation>
    </message>
    <message>
        <source>&amp;Restart scripting</source>
        <translation type="obsolete">&amp;Redémarrer</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10903"/>
        <location filename="../src/ApplicationWindow.cpp" line="11280"/>
        <source>E&amp;xecute</source>
        <translation>Exécuter</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10904"/>
        <location filename="../src/ApplicationWindow.cpp" line="11281"/>
        <source>Ctrl+J</source>
        <translation>Ctrl+J</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10906"/>
        <location filename="../src/ApplicationWindow.cpp" line="11283"/>
        <source>Execute &amp;All</source>
        <translation>Tout exécuter</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10907"/>
        <location filename="../src/ApplicationWindow.cpp" line="11284"/>
        <source>Ctrl+Shift+J</source>
        <translation>Ctrl+Shift+J</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10909"/>
        <location filename="../src/ApplicationWindow.cpp" line="11286"/>
        <source>&amp;Evaluate Expression</source>
        <translation>Evaluer l&apos;expression</translation>
    </message>
    <message>
        <source>&amp;Python Script Window</source>
        <translation type="obsolete">Fenêtre d&apos;édition de script</translation>
    </message>
    <message>
        <source>F3</source>
        <translation type="obsolete">F3</translation>
    </message>
    <message>
        <source>Fit</source>
        <translation type="obsolete">Ajuster</translation>
    </message>
    <message>
        <source>QtiPlot - HTTP Get Version File</source>
        <translation type="obsolete">QtiPlot - Recherche de mise à jour par le WEB</translation>
    </message>
    <message>
        <source>Cannot write file %1
%2.</source>
        <translation type="obsolete">Ne peut pas écire le fichier %1
%2.</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13244"/>
        <source>Error while fetching version file with HTTP: %1.</source>
        <translation type="unfinished">Erreur lors de la recherche de la version du fichier par le WEB : %1.</translation>
    </message>
    <message>
        <source>QtiPlot - Updates Available</source>
        <translation type="obsolete">QtiPlot - Mises à jour disponibles</translation>
    </message>
    <message>
        <source>There is a newer version of QtiPlot (%1) available for download. Would you like to download it?</source>
        <translation type="obsolete">Une nouvelle version de QtiPlot (%1) est disponible. Voulez-vous la télécharger ?</translation>
    </message>
    <message>
        <source>QtiPlot - No Updates Available</source>
        <translation type="obsolete">QtiPlot - Aucune mise à jour disponible</translation>
    </message>
    <message>
        <source>No updates available. Your current version %1 is the last version available!</source>
        <translation type="obsolete">Aucune mise à jour disponible. Votre version %1 est la dernière disponible !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="630"/>
        <location filename="../src/ApplicationWindow.cpp" line="674"/>
        <source>Matrix Plot</source>
        <translation>Tracé de matrice</translation>
    </message>
    <message>
        <source>QtiPlot - Script Window</source>
        <translation type="obsolete">QtiPlot - Fenêtre de script</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3520"/>
        <source>The file: &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt;&lt;p&gt; is the current file!</source>
        <translation>Le fichier : &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt;&lt;p&gt; est le fichier actuel !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5114"/>
        <source>Name &lt;b&gt;%1&lt;/b&gt; already exists!</source>
        <translation>Le nom &lt;b&gt;%1&lt;/b&gt; existe déjà !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5116"/>
        <source>Warning: for internal consistency reasons the underscore character is replaced with a minus sign.</source>
        <translation>Averstissement : pour des raisons d&apos;uniformité, le trait souligné (_) est remplacé par le signe moins (-).</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10599"/>
        <location filename="../src/ApplicationWindow.cpp" line="11131"/>
        <source>&amp;Horizontal Steps</source>
        <translation>Pas &amp;horizontaux</translation>
    </message>
    <message>
        <source>QtiPlot - Help Profile Not Found!</source>
        <translation type="obsolete">QtiPlot - Profile d&apos;aide non trouvé !</translation>
    </message>
    <message>
        <source>The assistant could not start because the file &lt;b&gt;%1&lt;/b&gt; was not found in the help file directory!&lt;p&gt;This file is provided with the QtiPlot manual which can be downloaded from the following internet address:&lt;/p&gt;&lt;p&gt;&lt;font color=blue&gt;&apos;http://soft.proindependent.com/manuals.html&apos;&lt;/font&gt;&lt;/p&gt;</source>
        <translation type="obsolete">L&apos;assistant ne peut démarre car le fichier &lt;b&gt;%1&lt;/b&gt; n&apos;est pas dans le répertoire d&apos;aide ! &lt;p&gt; Ce fichier est fourni avec le manuel de QtiPlot qui peut être téléchargé depuis la site internet :&lt;/p&gt;&lt;p&gt;&lt;font color=blue&gt;&apos;http://soft.proindependent.com/manuals.html&apos;&lt;/font&gt;&lt;/p&gt;</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11007"/>
        <source>Ctrl+K</source>
        <translation>Ctrl+K</translation>
    </message>
    <message>
        <source>Ctrl+Alt+K</source>
        <translation type="obsolete">Ctrl+Alt+K</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10506"/>
        <location filename="../src/ApplicationWindow.cpp" line="11056"/>
        <location filename="../src/ApplicationWindow.cpp" line="11057"/>
        <source>Automatic Layout</source>
        <translation>Disposition automatique</translation>
    </message>
    <message>
        <source>Alt+Q</source>
        <translation type="obsolete">Alt+Q</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10840"/>
        <source>Contour - &amp;Color Fill</source>
        <translation>Contour - &amp;Couleur de remplissage</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10843"/>
        <location filename="../src/ApplicationWindow.cpp" line="11173"/>
        <source>Contour &amp;Lines</source>
        <translation>&amp;Lignes du contour</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10846"/>
        <location filename="../src/ApplicationWindow.cpp" line="11176"/>
        <source>&amp;Gray Scale Map</source>
        <translation>Carte d&apos;échelle de &amp;gris</translation>
    </message>
    <message>
        <source>Script Window</source>
        <translation type="obsolete">Fenêtre de script</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11049"/>
        <source>Add Layer</source>
        <translation>Ajouter une planche</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11053"/>
        <source>Arrange Layers</source>
        <translation>Redisposer les planches</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11095"/>
        <source>Add Error Bars...</source>
        <translation>Ajouter des barres d&apos;erreurs...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11099"/>
        <source>Add Function...</source>
        <translation>Ajouter une fonction...</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11115"/>
        <source>Add Image</source>
        <translation>Ajouter une image</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11170"/>
        <source>Contour + &amp;Color Fill</source>
        <translation>Contour + &amp;couleur de remplissage</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11171"/>
        <source>Contour Lines + Color Fill</source>
        <translation>Lignes du contour + couleur de remplissage</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11174"/>
        <source>Contour Lines</source>
        <translation>Lignes du contour</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11177"/>
        <source>Gray Scale Map</source>
        <translation>Carte d&apos;échelle de gris</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11320"/>
        <source>Add Text</source>
        <translation>Ajouter du texte</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11404"/>
        <location filename="../src/ApplicationWindow.cpp" line="11405"/>
        <location filename="../src/ApplicationWindow.cpp" line="11406"/>
        <location filename="../src/ApplicationWindow.cpp" line="11407"/>
        <source>Animation</source>
        <translation>Animation</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11409"/>
        <location filename="../src/ApplicationWindow.cpp" line="11410"/>
        <location filename="../src/ApplicationWindow.cpp" line="11411"/>
        <location filename="../src/ApplicationWindow.cpp" line="11412"/>
        <source>Enable perspective</source>
        <translation>Perspective</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11414"/>
        <location filename="../src/ApplicationWindow.cpp" line="11415"/>
        <location filename="../src/ApplicationWindow.cpp" line="11416"/>
        <location filename="../src/ApplicationWindow.cpp" line="11417"/>
        <source>Reset rotation</source>
        <translation>MaJ Rotation</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11419"/>
        <location filename="../src/ApplicationWindow.cpp" line="11420"/>
        <location filename="../src/ApplicationWindow.cpp" line="11421"/>
        <location filename="../src/ApplicationWindow.cpp" line="11422"/>
        <source>Fit frame to window</source>
        <translation>Ajuster le cadre à la fenêtre</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="286"/>
        <source>&amp;Next</source>
        <comment>next window</comment>
        <translation type="unfinished">&amp;Suivante</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="287"/>
        <source>F5</source>
        <comment>next window shortcut</comment>
        <translation type="unfinished">F5</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="290"/>
        <source>&amp;Previous</source>
        <comment>previous window</comment>
        <translation type="unfinished">&amp;Précédente</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="291"/>
        <source>F6</source>
        <comment>previous window shortcut</comment>
        <translation type="unfinished">F6</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="440"/>
        <source>Disable &amp;Tools</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="516"/>
        <source>&amp;Zoom Out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="533"/>
        <location filename="../src/ApplicationWindow.cpp" line="11300"/>
        <source>&amp;Data Reader</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="540"/>
        <location filename="../src/ApplicationWindow.cpp" line="11304"/>
        <source>&amp;Select Data Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="527"/>
        <location filename="../src/ApplicationWindow.cpp" line="11308"/>
        <source>S&amp;creen Reader</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="675"/>
        <location filename="../src/ApplicationWindow.cpp" line="8840"/>
        <source>3D Surface</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="678"/>
        <location filename="../src/ApplicationWindow.cpp" line="716"/>
        <source>&amp;Recent Projects</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="684"/>
        <location filename="../src/ApplicationWindow.cpp" line="1011"/>
        <source>3&amp;D Plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="688"/>
        <location filename="../src/ApplicationWindow.cpp" line="867"/>
        <location filename="../src/ApplicationWindow.cpp" line="7889"/>
        <location filename="../src/ApplicationWindow.cpp" line="8005"/>
        <source>&amp;FFT Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="690"/>
        <location filename="../src/ApplicationWindow.cpp" line="7908"/>
        <location filename="../src/ApplicationWindow.cpp" line="8024"/>
        <source>Fit &amp;Multi-Peak</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1041"/>
        <source>Scripting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1121"/>
        <location filename="../src/ApplicationWindow.cpp" line="8108"/>
        <source>3D &amp;Plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1707"/>
        <location filename="../src/ApplicationWindow.cpp" line="1717"/>
        <source>Column</source>
        <translation type="unfinished">Colonne</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3911"/>
        <source>Script Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4082"/>
        <source>Table1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5479"/>
        <source>Please select two columns for this operation!</source>
        <translation type="unfinished">Sélectionnez 2 colonnes pour cette opération !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5497"/>
        <source>Please select exactly one columns for this operation!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5515"/>
        <location filename="../src/ApplicationWindow.cpp" line="5533"/>
        <source>Please select two columns for this operation:
 the first represents the signal and the second the response function!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10591"/>
        <location filename="../src/ApplicationWindow.cpp" line="11127"/>
        <source>Vertical &amp;Drop Lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6177"/>
        <source>Could not write to file: &lt;h4&gt;%1&lt;/h4&gt;&lt;p&gt;Please verify that you have the right to write to this location or that the file is not being used by another application!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3327"/>
        <location filename="../src/ApplicationWindow.cpp" line="3335"/>
        <source>ASCII Import Failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3328"/>
        <source>Numeric data cannot be imported into non-numeric column &quot;%1&quot;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3336"/>
        <source>Non-numeric data cannot be imported into non-text column &quot;%1&quot;.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7861"/>
        <location filename="../src/ApplicationWindow.cpp" line="7977"/>
        <source>Re&amp;move Pie Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7911"/>
        <location filename="../src/ApplicationWindow.cpp" line="8027"/>
        <source>Anal&amp;yze</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7923"/>
        <location filename="../src/ApplicationWindow.cpp" line="8039"/>
        <source>&amp;Paste Text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7925"/>
        <location filename="../src/ApplicationWindow.cpp" line="8041"/>
        <source>&amp;Paste Line/Arrow</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7927"/>
        <location filename="../src/ApplicationWindow.cpp" line="8043"/>
        <source>&amp;Paste Image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8200"/>
        <location filename="../src/ApplicationWindow.cpp" line="8233"/>
        <source>The manual can be downloaded from the following internet address:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8211"/>
        <location filename="../src/ApplicationWindow.cpp" line="8244"/>
        <source>The assistant could not start because the file &lt;b&gt;%1&lt;/b&gt; was not found in the help file directory!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8232"/>
        <source>Please indicate the location of the help file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9213"/>
        <source>Error reading matrix from project file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9217"/>
        <location filename="../src/ApplicationWindow.cpp" line="9368"/>
        <source>The following problems occured when loading the project file:
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9221"/>
        <location filename="../src/ApplicationWindow.cpp" line="9372"/>
        <source>Project loading partly failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9364"/>
        <source>Error reading table from project file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10172"/>
        <source>Curve</source>
        <translation type="unfinished">Courbe</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10420"/>
        <location filename="../src/ApplicationWindow.cpp" line="10980"/>
        <source>New 3D &amp;Surface Plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10428"/>
        <location filename="../src/ApplicationWindow.cpp" line="10988"/>
        <source>Open Image &amp;File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10432"/>
        <location filename="../src/ApplicationWindow.cpp" line="10991"/>
        <source>Import I&amp;mage...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10446"/>
        <location filename="../src/ApplicationWindow.cpp" line="11002"/>
        <source>Save As &amp;Template...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10449"/>
        <source>Save Note As...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10468"/>
        <location filename="../src/ApplicationWindow.cpp" line="11020"/>
        <source>Cu&amp;t Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10472"/>
        <location filename="../src/ApplicationWindow.cpp" line="11024"/>
        <source>&amp;Copy Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10476"/>
        <location filename="../src/ApplicationWindow.cpp" line="11028"/>
        <source>&amp;Paste Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10481"/>
        <location filename="../src/ApplicationWindow.cpp" line="11034"/>
        <source>Del</source>
        <comment>delete key</comment>
        <translation type="unfinished">Suppr</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10517"/>
        <location filename="../src/ApplicationWindow.cpp" line="11067"/>
        <source>&amp;Export PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10518"/>
        <location filename="../src/ApplicationWindow.cpp" line="11068"/>
        <source>Ctrl+Alt+P</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10535"/>
        <location filename="../src/ApplicationWindow.cpp" line="11081"/>
        <source>Clear &amp;Log Information</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10538"/>
        <location filename="../src/ApplicationWindow.cpp" line="11082"/>
        <source>Delete &amp;Fit Tables</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10541"/>
        <location filename="../src/ApplicationWindow.cpp" line="11084"/>
        <source>Plot &amp;Wizard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10560"/>
        <location filename="../src/ApplicationWindow.cpp" line="11102"/>
        <source>&amp;Rescale to Show All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10568"/>
        <location filename="../src/ApplicationWindow.cpp" line="11110"/>
        <source>Add Time Stamp</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10753"/>
        <location filename="../src/ApplicationWindow.cpp" line="11221"/>
        <source>&amp;Choose Help Folder...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10777"/>
        <location filename="../src/ApplicationWindow.cpp" line="11235"/>
        <source>&amp;View Pixel Line Profile</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10780"/>
        <location filename="../src/ApplicationWindow.cpp" line="11236"/>
        <source>&amp;Intensity Table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10807"/>
        <location filename="../src/ApplicationWindow.cpp" line="11245"/>
        <source>&amp;Layer Geometry</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10825"/>
        <location filename="../src/ApplicationWindow.cpp" line="11251"/>
        <source>Convert to &amp;Matrix</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10852"/>
        <location filename="../src/ApplicationWindow.cpp" line="11257"/>
        <source>&amp;Autocorrelate</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10886"/>
        <location filename="../src/ApplicationWindow.cpp" line="11271"/>
        <source>Report a &amp;Bug</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10889"/>
        <location filename="../src/ApplicationWindow.cpp" line="11272"/>
        <source>Download &amp;Manual</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10918"/>
        <location filename="../src/ApplicationWindow.cpp" line="10951"/>
        <source>&amp;Reset to Full Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10921"/>
        <location filename="../src/ApplicationWindow.cpp" line="10952"/>
        <source>Edit &amp;Range...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10927"/>
        <location filename="../src/ApplicationWindow.cpp" line="10953"/>
        <source>&amp;Hide</source>
        <translation type="unfinished">&amp;Cacher</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10930"/>
        <location filename="../src/ApplicationWindow.cpp" line="10954"/>
        <source>Hide &amp;Other Curves</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10933"/>
        <location filename="../src/ApplicationWindow.cpp" line="10955"/>
        <source>&amp;Show All Curves</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10970"/>
        <source>New table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10994"/>
        <source>Save project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11000"/>
        <source>Open template</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11003"/>
        <source>Save window as template</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11036"/>
        <source>Project &amp;Explorer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11041"/>
        <source>Show analysis results</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11069"/>
        <source>Export to PDF</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11112"/>
        <source>Date &amp; time </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11119"/>
        <source>Plot as line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11122"/>
        <source>Plot as symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11125"/>
        <source>Plot as line + symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11159"/>
        <source>Plot 3D ribbon</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11162"/>
        <source>Plot 3D bars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11165"/>
        <source>Plot 3D scatter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11168"/>
        <source>Plot 3D trajectory</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11234"/>
        <source>More Windows...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11264"/>
        <source>Box and whiskers plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11345"/>
        <location filename="../src/ApplicationWindow.cpp" line="11346"/>
        <source>No axes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11348"/>
        <source>Front grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11349"/>
        <source>Back grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11350"/>
        <source>Right grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11351"/>
        <source>Left grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11352"/>
        <source>Ceiling grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11353"/>
        <source>Floor grid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11361"/>
        <location filename="../src/ApplicationWindow.cpp" line="11362"/>
        <source>Hidden line</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11363"/>
        <location filename="../src/ApplicationWindow.cpp" line="11364"/>
        <source>Polygon Only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11367"/>
        <location filename="../src/ApplicationWindow.cpp" line="11368"/>
        <source>Mesh &amp; Filled Polygons</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11383"/>
        <location filename="../src/ApplicationWindow.cpp" line="11384"/>
        <location filename="../src/ApplicationWindow.cpp" line="11385"/>
        <location filename="../src/ApplicationWindow.cpp" line="11386"/>
        <source>Crosshairs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11393"/>
        <location filename="../src/ApplicationWindow.cpp" line="11394"/>
        <source>Floor data projection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11397"/>
        <location filename="../src/ApplicationWindow.cpp" line="11398"/>
        <source>Floor isolines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11401"/>
        <location filename="../src/ApplicationWindow.cpp" line="11402"/>
        <source>Empty floor</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Help</source>
        <translation type="obsolete">QtiPlot - Aide</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13327"/>
        <source>This will clear the contents of all the data associated with the table. Are you sure?</source>
        <translation type="unfinished">Toutes les données de la table seront effacées. Etes vous sûr ?</translation>
    </message>
    <message>
        <source>QtiPlot - Enter row number</source>
        <translation type="obsolete">QtiPlot - Entrer le numéro de la rangée</translation>
    </message>
    <message>
        <source>Row</source>
        <translation type="obsolete">Rangée</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="177"/>
        <location filename="../src/ApplicationWindow.cpp" line="656"/>
        <source>SciDAVis - untitled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="776"/>
        <location filename="../src/ApplicationWindow.cpp" line="11086"/>
        <source>Toolbars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="875"/>
        <source>&amp;Quick Fit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1065"/>
        <source>&amp;Tools</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1460"/>
        <location filename="../src/ApplicationWindow.cpp" line="13612"/>
        <source>Please set a default X column for this table, first!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1489"/>
        <location filename="../src/ApplicationWindow.cpp" line="1508"/>
        <source>Please select four columns for this operation!</source>
        <translation type="unfinished">Sélectionnez quatre colonnes pour cette opération !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3449"/>
        <location filename="../src/ApplicationWindow.cpp" line="3611"/>
        <source>The file &lt;b&gt;%1&lt;/b&gt; is not a valid project file.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3626"/>
        <source>SciDAVis does not support QtiPlot project files from versions later than 0.9.0.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3636"/>
        <location filename="../src/ApplicationWindow.cpp" line="3911"/>
        <location filename="../src/ApplicationWindow.cpp" line="6091"/>
        <location filename="../src/ApplicationWindow.cpp" line="6133"/>
        <location filename="../src/ApplicationWindow.cpp" line="7615"/>
        <location filename="../src/ApplicationWindow.cpp" line="11807"/>
        <location filename="../src/ApplicationWindow.cpp" line="13137"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4006"/>
        <source>The file: &lt;b&gt; %1 &lt;/b&gt; was not created using SciDAVis!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4015"/>
        <source>SciDAVis does not support QtiPlot template files from versions later than 0.9.0.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4107"/>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; is not a SciDAVis template file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4759"/>
        <source>Output format:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4760"/>
        <source>Directory:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4791"/>
        <source>There are no plot layers available in window &lt;b&gt;%1&lt;/b&gt;.&lt;br&gt;Graph window not exported!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4968"/>
        <location filename="../src/ApplicationWindow.cpp" line="12377"/>
        <source>SciDAVis project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4969"/>
        <location filename="../src/ApplicationWindow.cpp" line="12378"/>
        <source>Compressed SciDAVis project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5023"/>
        <source>SciDAVis/QtiPlot Matrix Template</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5025"/>
        <source>SciDAVis/QtiPlot 2D Graph Template</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5027"/>
        <source>SciDAVis/QtiPlot Table Template</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5029"/>
        <source>SciDAVis/QtiPlot 3D Surface Template</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10607"/>
        <location filename="../src/ApplicationWindow.cpp" line="11133"/>
        <source>&amp;Vertical Bars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10611"/>
        <location filename="../src/ApplicationWindow.cpp" line="11136"/>
        <source>&amp;Horizontal Bars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7477"/>
        <source>&amp;View Pixel Line profile</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8166"/>
        <source>Choose the location of the SciDAVis help folder!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8212"/>
        <location filename="../src/ApplicationWindow.cpp" line="8245"/>
        <source>This file is provided with the SciDAVis manual which can be downloaded from the following internet address:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9075"/>
        <source>Do you want SciDAVis to guess the best position for the new layer?
 Warning: this will rearrange existing layers!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10452"/>
        <location filename="../src/ApplicationWindow.cpp" line="11005"/>
        <source>&amp;Import ASCII...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10725"/>
        <location filename="../src/ApplicationWindow.cpp" line="11205"/>
        <source>Fit &amp;Wizard...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10744"/>
        <location filename="../src/ApplicationWindow.cpp" line="11214"/>
        <source>&amp;About SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10880"/>
        <location filename="../src/ApplicationWindow.cpp" line="11268"/>
        <source>&amp;SciDAVis Homepage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10883"/>
        <source>SciDAVis &amp;Forums</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10896"/>
        <location filename="../src/ApplicationWindow.cpp" line="11276"/>
        <source>Scripting &amp;Language</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10900"/>
        <location filename="../src/ApplicationWindow.cpp" line="11278"/>
        <source>&amp;Restart Scripting</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10939"/>
        <location filename="../src/ApplicationWindow.cpp" line="10949"/>
        <source>&amp;Copy status bar text</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11006"/>
        <source>Import data file(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11270"/>
        <source>Visit SciDAVis &amp;Forums</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11797"/>
        <source>&lt;b&gt; %1 &lt;/b&gt;: This command line option must be used without other arguments!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11807"/>
        <source>Version</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11815"/>
        <source>Usage</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11816"/>
        <source>options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11816"/>
        <location filename="../src/ApplicationWindow.cpp" line="11825"/>
        <location filename="../src/ApplicationWindow.cpp" line="11827"/>
        <source>file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11816"/>
        <location filename="../src/ApplicationWindow.cpp" line="11825"/>
        <location filename="../src/ApplicationWindow.cpp" line="11827"/>
        <source>name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11817"/>
        <source>Valid options are</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11818"/>
        <location filename="../src/ApplicationWindow.cpp" line="11819"/>
        <location filename="../src/ApplicationWindow.cpp" line="11820"/>
        <location filename="../src/ApplicationWindow.cpp" line="11821"/>
        <location filename="../src/ApplicationWindow.cpp" line="11822"/>
        <location filename="../src/ApplicationWindow.cpp" line="11823"/>
        <source>or</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11818"/>
        <source>show about dialog and exit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11819"/>
        <source>show command line options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11820"/>
        <source>start SciDAVis in language</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11821"/>
        <source>show SciDAVis manual in a standalone window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11822"/>
        <source>print SciDAVis version and release date</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11823"/>
        <source>execute the script file given as argument</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11825"/>
        <source>can be any .sciprj, .sciprj.gz, .qti, qti.gz, .opj, .ogm, .ogw, .ogg, .py or ASCII file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11831"/>
        <source>SciDAVis - Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11852"/>
        <source>&lt;b&gt; %1 &lt;/b&gt; unknown command line option!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11852"/>
        <source>Type %1 to see the list of the valid options.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11863"/>
        <source>&lt;b&gt;%1&lt;/b&gt; is a directory, please specify a file name!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11867"/>
        <source>You don&apos;t have the permission to open this file: &lt;b&gt;%1&lt;/b&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12057"/>
        <source>The file: &lt;b&gt;%1&lt;/b&gt; is not a SciDAVis or Origin project file!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12338"/>
        <source>Error writing data to disk</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12339"/>
        <source>&lt;html&gt;%1&lt;br&gt;&lt;br&gt;Your data may or may not have ended up in &lt;em&gt;%2&lt;/em&gt; (%3). 					If there already was a version of this project on disk, it has not been touched.&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12357"/>
        <source>Error renaming backup files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12358"/>
        <source>&lt;html&gt;%1&lt;br&gt;&lt;br&gt;Data was written to &lt;em&gt;%2&lt;/em&gt;, but saving the original file as &lt;em&gt;%3&lt;/em&gt;					and moving the new file to &lt;em&gt;%4&lt;/em&gt; failed. In case you wonder why the original file hasn&apos;t					been simply replaced, see here:					&lt;a href=&quot;http://bugs.launchpad.net/ubuntu/+source/linux/+bug/317781/comments/54&quot;&gt;					http://bugs.launchpad.net/ubuntu/+source/linux/+bug/317781/comments/54&lt;/a&gt;.&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12381"/>
        <source>Save project as</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12673"/>
        <source>bytes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12677"/>
        <location filename="../src/ApplicationWindow.cpp" line="12711"/>
        <source>windows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12680"/>
        <location filename="../src/ApplicationWindow.cpp" line="12712"/>
        <source>folders</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12970"/>
        <location filename="../src/ApplicationWindow.cpp" line="13017"/>
        <source>3D Graph</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13137"/>
        <source>Skipped moving folder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13228"/>
        <source>Do you wish to continue?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13572"/>
        <location filename="../src/ApplicationWindow.cpp" line="13609"/>
        <source>You need at least two columns for this operation!</source>
        <translation type="unfinished">Vous avez besoin d&apos;au moins deux colonnes pour cette opération !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13577"/>
        <source>Please select a Z column for this operation!</source>
        <translation type="unfinished">Sélectionnez une colonne Z pour cette opération !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13582"/>
        <source>You need to define a X column first!</source>
        <translation type="unfinished">Vous devez d&apos;abord définir une colonne X !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13587"/>
        <source>You need to define a Y column first!</source>
        <translation type="unfinished">Vous devez d&apos;abord définir une colonne Y !</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="401"/>
        <source>New Aspect</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="454"/>
        <source>Manage layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="467"/>
        <source>Add curves / error bars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="479"/>
        <source>Enrichments</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="571"/>
        <source>Lines and/or symbols</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1361"/>
        <location filename="../src/ApplicationWindow.cpp" line="1399"/>
        <location filename="../src/ApplicationWindow.cpp" line="1420"/>
        <location filename="../src/ApplicationWindow.cpp" line="1441"/>
        <location filename="../src/ApplicationWindow.cpp" line="1454"/>
        <source>Plot error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1460"/>
        <location filename="../src/ApplicationWindow.cpp" line="1470"/>
        <location filename="../src/ApplicationWindow.cpp" line="1489"/>
        <location filename="../src/ApplicationWindow.cpp" line="1508"/>
        <location filename="../src/ApplicationWindow.cpp" line="2916"/>
        <location filename="../src/ApplicationWindow.cpp" line="2924"/>
        <location filename="../src/ApplicationWindow.cpp" line="2934"/>
        <location filename="../src/ApplicationWindow.cpp" line="5101"/>
        <location filename="../src/ApplicationWindow.cpp" line="5105"/>
        <location filename="../src/ApplicationWindow.cpp" line="5114"/>
        <location filename="../src/ApplicationWindow.cpp" line="5123"/>
        <location filename="../src/ApplicationWindow.cpp" line="5188"/>
        <location filename="../src/ApplicationWindow.cpp" line="5199"/>
        <location filename="../src/ApplicationWindow.cpp" line="5479"/>
        <location filename="../src/ApplicationWindow.cpp" line="5497"/>
        <location filename="../src/ApplicationWindow.cpp" line="5515"/>
        <location filename="../src/ApplicationWindow.cpp" line="5533"/>
        <location filename="../src/ApplicationWindow.cpp" line="11796"/>
        <location filename="../src/ApplicationWindow.cpp" line="11844"/>
        <location filename="../src/ApplicationWindow.cpp" line="11851"/>
        <location filename="../src/ApplicationWindow.cpp" line="12543"/>
        <location filename="../src/ApplicationWindow.cpp" line="12553"/>
        <location filename="../src/ApplicationWindow.cpp" line="13572"/>
        <location filename="../src/ApplicationWindow.cpp" line="13577"/>
        <location filename="../src/ApplicationWindow.cpp" line="13582"/>
        <location filename="../src/ApplicationWindow.cpp" line="13587"/>
        <location filename="../src/ApplicationWindow.cpp" line="13600"/>
        <location filename="../src/ApplicationWindow.cpp" line="13606"/>
        <location filename="../src/ApplicationWindow.cpp" line="13609"/>
        <location filename="../src/ApplicationWindow.cpp" line="13612"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1692"/>
        <location filename="../src/ApplicationWindow.cpp" line="1702"/>
        <location filename="../src/ApplicationWindow.cpp" line="1760"/>
        <location filename="../src/ApplicationWindow.cpp" line="2825"/>
        <location filename="../src/ApplicationWindow.cpp" line="2837"/>
        <location filename="../src/ApplicationWindow.cpp" line="2843"/>
        <location filename="../src/ApplicationWindow.cpp" line="4790"/>
        <location filename="../src/ApplicationWindow.cpp" line="5691"/>
        <location filename="../src/ApplicationWindow.cpp" line="6001"/>
        <location filename="../src/ApplicationWindow.cpp" line="6011"/>
        <location filename="../src/ApplicationWindow.cpp" line="6047"/>
        <location filename="../src/ApplicationWindow.cpp" line="6068"/>
        <location filename="../src/ApplicationWindow.cpp" line="6084"/>
        <location filename="../src/ApplicationWindow.cpp" line="6113"/>
        <location filename="../src/ApplicationWindow.cpp" line="6127"/>
        <location filename="../src/ApplicationWindow.cpp" line="6158"/>
        <location filename="../src/ApplicationWindow.cpp" line="6193"/>
        <location filename="../src/ApplicationWindow.cpp" line="6536"/>
        <location filename="../src/ApplicationWindow.cpp" line="6557"/>
        <location filename="../src/ApplicationWindow.cpp" line="6569"/>
        <location filename="../src/ApplicationWindow.cpp" line="6576"/>
        <location filename="../src/ApplicationWindow.cpp" line="6593"/>
        <location filename="../src/ApplicationWindow.cpp" line="6602"/>
        <location filename="../src/ApplicationWindow.cpp" line="6624"/>
        <location filename="../src/ApplicationWindow.cpp" line="6643"/>
        <location filename="../src/ApplicationWindow.cpp" line="6684"/>
        <location filename="../src/ApplicationWindow.cpp" line="6712"/>
        <location filename="../src/ApplicationWindow.cpp" line="6750"/>
        <location filename="../src/ApplicationWindow.cpp" line="6774"/>
        <location filename="../src/ApplicationWindow.cpp" line="6821"/>
        <location filename="../src/ApplicationWindow.cpp" line="8271"/>
        <location filename="../src/ApplicationWindow.cpp" line="8359"/>
        <location filename="../src/ApplicationWindow.cpp" line="11651"/>
        <location filename="../src/ApplicationWindow.cpp" line="11664"/>
        <location filename="../src/ApplicationWindow.cpp" line="11686"/>
        <location filename="../src/ApplicationWindow.cpp" line="11699"/>
        <location filename="../src/ApplicationWindow.cpp" line="11731"/>
        <location filename="../src/ApplicationWindow.cpp" line="11744"/>
        <location filename="../src/ApplicationWindow.cpp" line="13326"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1710"/>
        <location filename="../src/ApplicationWindow.cpp" line="1721"/>
        <source>Choose data set</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="1733"/>
        <location filename="../src/ApplicationWindow.cpp" line="1770"/>
        <source>Choose matrix to plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2079"/>
        <source>Import image from file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2099"/>
        <source>Load image from file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2491"/>
        <source>Renamed Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2869"/>
        <source>Error bars error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3418"/>
        <location filename="../src/ApplicationWindow.cpp" line="3431"/>
        <location filename="../src/ApplicationWindow.cpp" line="3448"/>
        <location filename="../src/ApplicationWindow.cpp" line="3472"/>
        <location filename="../src/ApplicationWindow.cpp" line="3519"/>
        <location filename="../src/ApplicationWindow.cpp" line="3545"/>
        <location filename="../src/ApplicationWindow.cpp" line="3551"/>
        <location filename="../src/ApplicationWindow.cpp" line="3559"/>
        <location filename="../src/ApplicationWindow.cpp" line="3565"/>
        <location filename="../src/ApplicationWindow.cpp" line="3599"/>
        <location filename="../src/ApplicationWindow.cpp" line="3611"/>
        <location filename="../src/ApplicationWindow.cpp" line="3625"/>
        <location filename="../src/ApplicationWindow.cpp" line="3649"/>
        <location filename="../src/ApplicationWindow.cpp" line="3993"/>
        <location filename="../src/ApplicationWindow.cpp" line="4005"/>
        <location filename="../src/ApplicationWindow.cpp" line="4015"/>
        <location filename="../src/ApplicationWindow.cpp" line="4106"/>
        <location filename="../src/ApplicationWindow.cpp" line="11862"/>
        <location filename="../src/ApplicationWindow.cpp" line="11866"/>
        <location filename="../src/ApplicationWindow.cpp" line="11870"/>
        <location filename="../src/ApplicationWindow.cpp" line="12049"/>
        <location filename="../src/ApplicationWindow.cpp" line="12056"/>
        <location filename="../src/ApplicationWindow.cpp" line="12100"/>
        <source>File opening error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3504"/>
        <source>File Open Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3667"/>
        <source>Opening file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3971"/>
        <source>Scripting Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3983"/>
        <source>Open Template File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4652"/>
        <location filename="../src/ApplicationWindow.cpp" line="4680"/>
        <location filename="../src/ApplicationWindow.cpp" line="4735"/>
        <location filename="../src/ApplicationWindow.cpp" line="4821"/>
        <location filename="../src/ApplicationWindow.cpp" line="5047"/>
        <location filename="../src/ApplicationWindow.cpp" line="6176"/>
        <source>Export Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="4806"/>
        <location filename="../src/ApplicationWindow.cpp" line="5416"/>
        <source>Overwrite file?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5345"/>
        <source>Right Axis Title</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5370"/>
        <source>Top Axis Title</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5557"/>
        <source>Column selection error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="5576"/>
        <source>Row selection error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6671"/>
        <source>Add new layer?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6731"/>
        <source>Insert image from file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="6845"/>
        <source>Layer Geometry</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7103"/>
        <source>Duplicate window error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7131"/>
        <source>Duplicate error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="7250"/>
        <location filename="../src/ApplicationWindow.cpp" line="7268"/>
        <source>Window Geometry</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8176"/>
        <source>index.html File Not Found!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8199"/>
        <location filename="../src/ApplicationWindow.cpp" line="8231"/>
        <source>Help Files Not Found!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8210"/>
        <location filename="../src/ApplicationWindow.cpp" line="8243"/>
        <source>Help Profile Not Found!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="8333"/>
        <source>Edit function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9017"/>
        <source>Set the number of pixels to average</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9074"/>
        <source>Guess best origin for the new layer?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11751"/>
        <source>Enter the number of peaks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12309"/>
        <source>File save error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="12746"/>
        <source>Delete folder?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13095"/>
        <source>No match found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13243"/>
        <source>HTTP get version file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13264"/>
        <source>Updates Available</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1488"/>
        <source>English</source>
        <comment>translate this to the language of the translation file, NOT to the meaning of English!</comment>
        <translation type="unfinished">Français</translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10966"/>
        <source>Create an empty note / script window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13227"/>
        <source>SciDAVis will now try to determine whether a new version of SciDAVis is available. Please modify your firewall settings in order to allow SciDAVis to connect to the internet.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13265"/>
        <source>There is a newer version of SciDAVis (%1) available for download. Would you like to download it now?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13272"/>
        <source>No updates available. Your are already running the latest version.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13275"/>
        <source>Invalid version file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13276"/>
        <source>The version file (contents: &quot;%1&quot;) could not be decoded into a valid version number.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="2935"/>
        <source>You can only define error bars for numeric columns.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3352"/>
        <source>new_by_import</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3472"/>
        <location filename="../src/ApplicationWindow.cpp" line="12100"/>
        <source>SciDAVis currently does not support Origin import. If you are interested in reviving an maintaining an Origin import filter, contact the developers.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9047"/>
        <source>Error importing image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="9047"/>
        <source>Import of image &apos;%1&apos; failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10491"/>
        <source>Undo/Redo &amp;History</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="10822"/>
        <location filename="../src/ApplicationWindow.cpp" line="11250"/>
        <source>&amp;Convert to Table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11827"/>
        <source>can be any .sciprj, .sciprj.gz, .qti, qti.gz, .py or ASCII file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="13703"/>
        <source>Undo/Redo History</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3545"/>
        <source>zlib can&apos;t open %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3551"/>
        <source>Can&apos;t create temporary file for writing uncompressed copy of %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3565"/>
        <source>Error writing to temporary file: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3603"/>
        <source>Opening backup copy</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="3604"/>
        <source>The original (corrupt) file is being left untouched, in case you want to try rescuing data manually. If you want to continue working with the automatically restored backup copy, you have to explicitly overwrite the original file.</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AsciiTableImportFilter</name>
    <message>
        <location filename="../src/future/table/AsciiTableImportFilter.cpp" line="120"/>
        <source>Table</source>
        <translation type="unfinished">Table</translation>
    </message>
</context>
<context>
    <name>AssociationsDialog</name>
    <message>
        <source>QtiPlot - Plot Associations</source>
        <translation type="obsolete">QtiPlot - Association de graphes</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="57"/>
        <source>Spreadsheet: </source>
        <translation type="unfinished">Feuille de calcul : </translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="69"/>
        <source>Column</source>
        <translation type="unfinished">Colonne</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="69"/>
        <source>X</source>
        <translation type="unfinished">X</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="69"/>
        <source>Y</source>
        <translation type="unfinished">Y</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="69"/>
        <location filename="../src/AssociationsDialog.cpp" line="286"/>
        <source>xErr</source>
        <translation type="unfinished">xErr</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="69"/>
        <location filename="../src/AssociationsDialog.cpp" line="287"/>
        <source>yErr</source>
        <translation type="unfinished">yErr</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="76"/>
        <source>&amp;Update curves</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="77"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="79"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="305"/>
        <source>xEnd</source>
        <translation type="unfinished">xEnd</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="306"/>
        <source>yEnd</source>
        <translation type="unfinished">yEnd</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="313"/>
        <source>Angle</source>
        <translation type="unfinished">Angle</translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="314"/>
        <source>Magn.</source>
        <comment>Magnitude, vector length</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AssociationsDialog.cpp" line="50"/>
        <source>Plot Associations</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>AxesDialog</name>
    <message>
        <source>QtiPlot - General Plot Options</source>
        <translation type="obsolete">Qtiplot - Options générales pour les graphes</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="86"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">&amp;Appliquer</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="90"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="95"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="118"/>
        <source>From</source>
        <translation type="unfinished">De</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="122"/>
        <source>To</source>
        <translation type="unfinished">à</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="126"/>
        <location filename="../src/AxesDialog.cpp" line="421"/>
        <source>Type</source>
        <translation type="unfinished">Type</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="128"/>
        <source>linear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="129"/>
        <source>logarithmic</source>
        <translation type="unfinished">logarithmique</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="134"/>
        <source>Inverted</source>
        <translation type="unfinished">Inversé</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="146"/>
        <source>Step</source>
        <translation type="unfinished">Intervalle</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="159"/>
        <location filename="../src/AxesDialog.cpp" line="435"/>
        <source>Major Ticks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="166"/>
        <location filename="../src/AxesDialog.cpp" line="444"/>
        <source>Minor Ticks</source>
        <translation type="unfinished">Graduations Secondaires</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="182"/>
        <location filename="../src/AxesDialog.cpp" line="278"/>
        <location filename="../src/AxesDialog.cpp" line="363"/>
        <source>Bottom</source>
        <translation type="unfinished">Inférieur</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="183"/>
        <location filename="../src/AxesDialog.cpp" line="283"/>
        <location filename="../src/AxesDialog.cpp" line="364"/>
        <source>Left</source>
        <translation type="unfinished">Gauche</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="184"/>
        <location filename="../src/AxesDialog.cpp" line="279"/>
        <location filename="../src/AxesDialog.cpp" line="365"/>
        <source>Top</source>
        <translation type="unfinished">Supérieur</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="185"/>
        <location filename="../src/AxesDialog.cpp" line="284"/>
        <location filename="../src/AxesDialog.cpp" line="366"/>
        <source>Right</source>
        <translation type="unfinished">Droite</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="206"/>
        <source>Scale</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="225"/>
        <source>Major Grids</source>
        <translation type="unfinished">Grille Principale</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="230"/>
        <source>Minor Grids</source>
        <translation type="unfinished">Grille Secondaire</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="234"/>
        <source>Line Color</source>
        <translation type="unfinished">Couleur des Lignes</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="243"/>
        <source>Line Type</source>
        <translation type="unfinished">Type de Lignes</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="262"/>
        <source>Thickness</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="275"/>
        <location filename="../src/AxesDialog.cpp" line="569"/>
        <source>Axes</source>
        <translation type="unfinished">Axes</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="287"/>
        <source>Additional lines</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="290"/>
        <source>X=0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="295"/>
        <source>Y=0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="305"/>
        <source>Horizontal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="306"/>
        <source>Vertical</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="325"/>
        <source>Grid</source>
        <translation type="unfinished">Grille</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="385"/>
        <source>Show</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="389"/>
        <source>Title</source>
        <translation type="unfinished">Titre</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="404"/>
        <source>&amp;Font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="353"/>
        <source>Numeric</source>
        <translation type="unfinished">Numérique</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="354"/>
        <source>Text from table</source>
        <translation type="unfinished">Texte de la table</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="355"/>
        <source>Day of the week</source>
        <translation type="unfinished">Jour de la semaine</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="356"/>
        <source>Month</source>
        <translation type="unfinished">Mois</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="357"/>
        <source>Time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="358"/>
        <source>Date</source>
        <translation type="unfinished">Date</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="360"/>
        <source>Column Headings</source>
        <translation type="unfinished">En-têtes de colonnes</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="425"/>
        <source>Font</source>
        <translation type="unfinished">Police</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="428"/>
        <source>Axis &amp;Font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="431"/>
        <location filename="../src/AxesDialog.cpp" line="497"/>
        <location filename="../src/AxesDialog.cpp" line="558"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="438"/>
        <location filename="../src/AxesDialog.cpp" line="447"/>
        <source>None</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="439"/>
        <location filename="../src/AxesDialog.cpp" line="448"/>
        <source>Out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="440"/>
        <location filename="../src/AxesDialog.cpp" line="449"/>
        <source>In &amp; Out</source>
        <translation type="unfinished">Au dessus et en dessous</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="441"/>
        <location filename="../src/AxesDialog.cpp" line="450"/>
        <source>In</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="453"/>
        <source>Stand-off</source>
        <translation type="unfinished">Décalage</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="458"/>
        <source>Show Labels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="465"/>
        <source>Column</source>
        <translation type="unfinished">Colonne</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="471"/>
        <source>Table</source>
        <translation type="unfinished">Table</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="477"/>
        <source>Format</source>
        <translation type="unfinished">Format</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="484"/>
        <source>Precision</source>
        <translation type="unfinished">Précision</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="490"/>
        <source>Angle</source>
        <translation type="unfinished">Angle</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="501"/>
        <source>For&amp;mula</source>
        <translation type="unfinished">For&amp;mule</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="520"/>
        <source>Axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="554"/>
        <source>Canvas frame</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="562"/>
        <source>Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Opacity</source>
        <translation type="obsolete">Opacité</translation>
    </message>
    <message>
        <source>Canvas Color</source>
        <translation type="obsolete">Couleur du cadre</translation>
    </message>
    <message>
        <source>Border Color</source>
        <translation type="obsolete">Couleur de la bordure</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="572"/>
        <source>Draw backbones</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="575"/>
        <source>Line Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="580"/>
        <source>Major ticks length</source>
        <translation type="unfinished">Longueur des graduations principales</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="585"/>
        <source>Minor ticks length</source>
        <translation type="unfinished">Longueur des graduations secondaires</translation>
    </message>
    <message>
        <source>Margin</source>
        <translation type="obsolete">Marge</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="596"/>
        <source>General</source>
        <translation type="unfinished">Général</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="688"/>
        <source>Automatic</source>
        <translation type="unfinished">Automatique</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="689"/>
        <source>Decimal: 100.0</source>
        <translation type="unfinished">Décimal : 100.0</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="690"/>
        <source>Scientific: 1e2</source>
        <translation type="unfinished">Scientifique : 1E2 {1e?}</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="691"/>
        <source>Scientific: 10^2</source>
        <translation type="unfinished">Scientifique : 1E2 {10^?}</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1233"/>
        <source>Please enter a positive step value!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Formula input error</source>
        <translation type="obsolete">QtiPlot - Erreur de formule</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1304"/>
        <source>Valid variables are &apos;x&apos; for Top/Bottom axes and &apos;y&apos; for Left/Right axes!</source>
        <translation type="unfinished">Les variables ne peuvent être que &apos;x&apos; pour les axes supérieur/inférieur et &apos;y&apos; pour les axes latéraux !</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1445"/>
        <source>millisec.</source>
        <translation type="unfinished">ms.</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1446"/>
        <source>sec.</source>
        <translation type="unfinished">sec.</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1447"/>
        <source>min.</source>
        <translation type="unfinished">min.</translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1448"/>
        <source>hours</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1453"/>
        <source>days</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1454"/>
        <source>weeks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="73"/>
        <source>General Plot Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1200"/>
        <source>Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1212"/>
        <source>End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1226"/>
        <location filename="../src/AxesDialog.cpp" line="1233"/>
        <source>Step input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="1303"/>
        <source>Formula input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/AxesDialog.cpp" line="359"/>
        <source>Date &amp; Time</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CanvasPicker</name>
    <message>
        <location filename="../src/CanvasPicker.cpp" line="241"/>
        <source>enter your text here</source>
        <translation>Entrez votre texte ici</translation>
    </message>
</context>
<context>
    <name>ColorBox</name>
    <message>
        <location filename="../src/ColorBox.cpp" line="74"/>
        <source>black</source>
        <translation>noir</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="80"/>
        <source>red</source>
        <translation>rouge</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="84"/>
        <source>green</source>
        <translation>vert</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="88"/>
        <source>blue</source>
        <translation>bleu</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="92"/>
        <source>cyan</source>
        <translation>cyan</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="96"/>
        <source>magenta</source>
        <translation>rose</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="100"/>
        <source>yellow</source>
        <translation>jaune</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="104"/>
        <source>dark yellow</source>
        <translation>jaune foncé</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="108"/>
        <source>navy</source>
        <translation>bleu outremer</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="112"/>
        <source>purple</source>
        <translation>violet</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="116"/>
        <source>wine</source>
        <translation>rouge grenat</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="120"/>
        <source>olive</source>
        <translation>vert olive</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="124"/>
        <source>dark cyan</source>
        <translation>turquoise</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="144"/>
        <source>white</source>
        <translation>blanc</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="148"/>
        <source>light gray</source>
        <translation>gris clair</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="168"/>
        <source>dark gray</source>
        <translation>gris foncé</translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="128"/>
        <source>royal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="132"/>
        <source>orange</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="136"/>
        <source>violet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="140"/>
        <source>pink</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="152"/>
        <source>gray</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="156"/>
        <source>light yellow</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="160"/>
        <source>light cyan</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ColorBox.cpp" line="164"/>
        <source>light magenta</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ColorMapEditor</name>
    <message>
        <location filename="../src/ColorMapEditor.cpp" line="56"/>
        <source>Level</source>
        <translation>Niveau</translation>
    </message>
    <message>
        <location filename="../src/ColorMapEditor.cpp" line="56"/>
        <source>Color</source>
        <translation>Couleur</translation>
    </message>
    <message>
        <location filename="../src/ColorMapEditor.cpp" line="65"/>
        <source>&amp;Insert</source>
        <translation>&amp;Insérer</translation>
    </message>
    <message>
        <location filename="../src/ColorMapEditor.cpp" line="69"/>
        <source>&amp;Delete</source>
        <translation>&amp;Supprimer</translation>
    </message>
    <message>
        <location filename="../src/ColorMapEditor.cpp" line="77"/>
        <source>&amp;Scale Colors</source>
        <translation>Echelle des couleur&amp;s</translation>
    </message>
    <message>
        <source>QtiPlot - Input Error</source>
        <translation type="obsolete">Qtiplot - Erreur : entrée incorrecte</translation>
    </message>
    <message>
        <location filename="../src/ColorMapEditor.cpp" line="231"/>
        <source>Sorry, you cannot edit this value!</source>
        <translation>Désolé, vous ne pouvez modifiez cette valeur !</translation>
    </message>
    <message>
        <location filename="../src/ColorMapEditor.cpp" line="245"/>
        <source>Please enter a valid color level value!</source>
        <translation>Veuillez donner une valeur de niveau de couleur valide !</translation>
    </message>
    <message>
        <location filename="../src/ColorMapEditor.cpp" line="231"/>
        <location filename="../src/ColorMapEditor.cpp" line="245"/>
        <source>Input Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Column</name>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="382"/>
        <source>column type missing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="388"/>
        <source>column type invalid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="395"/>
        <source>column mode missing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="401"/>
        <source>column mode invalid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="407"/>
        <source>column type or mode invalid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="417"/>
        <source>column plot designation invalid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="453"/>
        <source>unknown element &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="462"/>
        <source>no column element found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="497"/>
        <location filename="../src/future/core/column/Column.cpp" line="516"/>
        <source>invalid or missing start or end row</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="537"/>
        <source>invalid or missing row type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="545"/>
        <source>invalid or missing row index</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="557"/>
        <source>invalid row value</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ColumnStringIO</name>
    <message>
        <location filename="../src/future/core/column/Column.h" line="325"/>
        <source>as string</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ConfigDialog</name>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="177"/>
        <source>The column separator can be customized. 
The following special codes can be used:
\t for a TAB character 
\s for a SPACE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="178"/>
        <source>The separator must not contain the following characters: 
0-9eE.+-</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Choose default settings</source>
        <translation type="obsolete">Qtiplot - Choisissez les paramètres par défaut</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="785"/>
        <source>General</source>
        <translation type="unfinished">Général</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="786"/>
        <location filename="../src/ConfigDialog.cpp" line="855"/>
        <source>Tables</source>
        <translation type="unfinished">Tables</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="787"/>
        <location filename="../src/ConfigDialog.cpp" line="857"/>
        <source>2D Plots</source>
        <translation type="unfinished">Graphes 2D</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="788"/>
        <location filename="../src/ConfigDialog.cpp" line="856"/>
        <source>3D Plots</source>
        <translation type="unfinished">Graphes 3D</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="789"/>
        <source>Fitting</source>
        <translation type="unfinished">Ajustement</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="809"/>
        <source>Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="810"/>
        <source>Curves</source>
        <translation type="unfinished">Courbes</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="811"/>
        <source>Ticks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="812"/>
        <location filename="../src/ConfigDialog.cpp" line="935"/>
        <location filename="../src/ConfigDialog.cpp" line="992"/>
        <source>Fonts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="814"/>
        <source>Do not &amp;resize layers when window size changes</source>
        <translation type="unfinished">Ne pas &amp;redimensionner les planches lorsque la taille de la fenêtre change</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="816"/>
        <location filename="../src/ConfigDialog.cpp" line="819"/>
        <source>Length</source>
        <translation type="unfinished">Longueur</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1011"/>
        <source>Scale Errors with sqrt(Chi^2/doF)</source>
        <translation type="unfinished">Échelle d&apos;erreurs avec sqrt(Chi^2/doF)</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="818"/>
        <source>Axes linewidth</source>
        <translation type="unfinished">Epaisseur des traits d&apos;axes</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="820"/>
        <source>Major Ticks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="821"/>
        <source>Minor Ticks</source>
        <translation type="unfinished">Graduations Secondaires</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="823"/>
        <source>Margin</source>
        <translation type="unfinished">Marge</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="824"/>
        <source>Frame width</source>
        <translation type="unfinished">Epaisseur du cadre</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="825"/>
        <source>Axes &amp;backbones</source>
        <translation type="unfinished">Abscisses / Ordonnées</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="826"/>
        <source>Canvas Fra&amp;me</source>
        <translation type="unfinished">Bordure du cadre</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="827"/>
        <source>Sho&amp;w all axes</source>
        <translation type="unfinished">Afficher tous les axes</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="828"/>
        <source>Show &amp;Title</source>
        <translation type="unfinished">Afficher le &amp;Titre</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="829"/>
        <source>Scale &amp;Fonts</source>
        <translation type="unfinished">Taille de la Police</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="830"/>
        <source>Auto&amp;scaling</source>
        <translation type="unfinished">Echelle automatique</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="831"/>
        <source>Antia&amp;liasing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="834"/>
        <location filename="../src/ConfigDialog.cpp" line="840"/>
        <source>None</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="835"/>
        <location filename="../src/ConfigDialog.cpp" line="841"/>
        <source>Out</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="836"/>
        <location filename="../src/ConfigDialog.cpp" line="842"/>
        <source>In &amp; Out</source>
        <translation type="unfinished">Au dessus et en dessous</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="837"/>
        <location filename="../src/ConfigDialog.cpp" line="843"/>
        <source>In</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="853"/>
        <source>Prompt on closing</source>
        <translation type="unfinished">Confirmer les fermetures de</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="854"/>
        <source>Folders</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="858"/>
        <source>Matrices</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="859"/>
        <source>&amp;Notes</source>
        <translation type="unfinished">Commentai&amp;res</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="861"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="862"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="863"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">&amp;Appliquer</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="864"/>
        <source>&amp;Text Font</source>
        <translation type="unfinished">&amp;Texte</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="865"/>
        <source>&amp;Labels Font</source>
        <translation type="unfinished">Etiquettes</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="866"/>
        <source>A&amp;xes Labels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="867"/>
        <source>Axes &amp;Numbers</source>
        <translation type="unfinished">Etiquettes des &amp;Graduations</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="868"/>
        <source>&amp;Legend</source>
        <translation type="unfinished">&amp;Légende</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="869"/>
        <source>T&amp;itle</source>
        <translation type="unfinished">T&amp;itre</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="872"/>
        <source>Application</source>
        <translation type="unfinished">Application</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="873"/>
        <source>Confirmations</source>
        <translation type="unfinished">Confirmations</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="874"/>
        <location filename="../src/ConfigDialog.cpp" line="919"/>
        <location filename="../src/ConfigDialog.cpp" line="991"/>
        <source>Colors</source>
        <translation type="unfinished">Couleurs</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="877"/>
        <source>Language</source>
        <translation type="unfinished">Langue</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="878"/>
        <source>Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="879"/>
        <source>Main Font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="880"/>
        <source>Choose &amp;font</source>
        <translation type="unfinished">Modifier</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="881"/>
        <source>Workspace</source>
        <translation type="unfinished">Fond</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="882"/>
        <source>Panels text</source>
        <translation type="unfinished">Texte des Panneaux</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="883"/>
        <source>Panels</source>
        <translation type="unfinished">Panneaux</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="884"/>
        <source>Save every</source>
        <translation type="unfinished">Sauvegarder toutes les</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="885"/>
        <source>Check for new versions at startup</source>
        <translation type="unfinished">Vérifier les nouvelles versions au démarrage</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="886"/>
        <source> minutes</source>
        <translation type="unfinished">minutes</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="887"/>
        <source>Default scripting language</source>
        <translation type="unfinished">Langage de script</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="920"/>
        <source>Default Column Separator</source>
        <translation type="unfinished">Séparateur de colonnes par défaut</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="922"/>
        <location filename="../src/ConfigDialog.cpp" line="924"/>
        <location filename="../src/ConfigDialog.cpp" line="925"/>
        <location filename="../src/ConfigDialog.cpp" line="1030"/>
        <source>TAB</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="923"/>
        <location filename="../src/ConfigDialog.cpp" line="926"/>
        <location filename="../src/ConfigDialog.cpp" line="927"/>
        <location filename="../src/ConfigDialog.cpp" line="1032"/>
        <source>SPACE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="932"/>
        <source>Background</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="933"/>
        <source>Text</source>
        <translation type="unfinished">Texte</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="934"/>
        <source>Labels</source>
        <translation type="unfinished">Etiquettes</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="938"/>
        <source>Default curve style</source>
        <translation type="unfinished">Style de courbe par défaut</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="939"/>
        <source>Line width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="940"/>
        <source>Symbol size</source>
        <translation type="unfinished">Taille des symboles</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="943"/>
        <source> Line</source>
        <translation type="unfinished"> Ligne</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="944"/>
        <source> Scatter</source>
        <translation type="unfinished"> Nuage de points</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="945"/>
        <source> Line + Symbol</source>
        <translation type="unfinished"> Ligne + Symbole</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="946"/>
        <source> Vertical drop lines</source>
        <translation type="unfinished"> Epingles</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="947"/>
        <source> Spline</source>
        <translation type="unfinished"> Spline</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="948"/>
        <source> Vertical steps</source>
        <translation type="unfinished"> Marches verticales</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="949"/>
        <source> Horizontal steps</source>
        <translation type="unfinished"> Marches horizontales</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="950"/>
        <source> Area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="951"/>
        <source> Vertical Bars</source>
        <translation type="unfinished"> Barres Verticales</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="952"/>
        <source> Horizontal Bars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="977"/>
        <source>Resolution</source>
        <translation type="unfinished">Résolution</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="978"/>
        <source>(all data shown)</source>
        <translation type="unfinished">(Toutes les données)</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="979"/>
        <source>&amp;Show Legend</source>
        <translation type="unfinished">Afficher la légende</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="980"/>
        <source>Show &amp;Projection</source>
        <translation type="unfinished">Afficher la &amp;Projection</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="981"/>
        <source>&amp;Data Max</source>
        <translation type="unfinished">&amp;Maximum</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="982"/>
        <source>Smoot&amp;h Line</source>
        <translation type="unfinished">Affinée</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="983"/>
        <source>O&amp;rthogonal</source>
        <translation type="unfinished">O&amp;rthogonal</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="984"/>
        <source>Lab&amp;els</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="985"/>
        <source>Mesh &amp;Line</source>
        <translation type="unfinished">Ligne du maillage</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="986"/>
        <source>&amp;Grid</source>
        <translation type="unfinished">&amp;Grille</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="987"/>
        <source>Data &amp;Min</source>
        <translation type="unfinished">Minimum</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="988"/>
        <location filename="../src/ConfigDialog.cpp" line="995"/>
        <source>&amp;Numbers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="989"/>
        <source>A&amp;xes</source>
        <translation type="unfinished">A&amp;xes</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="990"/>
        <source>&amp;Background</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="993"/>
        <source>&amp;Title</source>
        <translation type="unfinished">&amp;Titre</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="994"/>
        <source>&amp;Axes Labels</source>
        <translation type="unfinished">Etiquette des &amp;Axes</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="996"/>
        <source>Autosca&amp;ling</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="999"/>
        <source>Generated Fit Curve</source>
        <translation type="unfinished">Création de l&apos;ajustement de la courbe</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1000"/>
        <source>Uniform X Function</source>
        <translation type="unfinished">Fonction X uniforme</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1001"/>
        <source>Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1002"/>
        <source>Same X as Fitting Data</source>
        <translation type="unfinished">Même X que les données d&apos;ajustement</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1005"/>
        <location filename="../src/ConfigDialog.cpp" line="1012"/>
        <source>Display Peak Curves for Multi-peak Fits</source>
        <translation type="unfinished">Afficher les pics de la courbe pour l&apos;ajustement multi-pics</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1007"/>
        <source>Parameters Output</source>
        <translation type="unfinished">Paramètre de sortie</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1008"/>
        <source>Significant Digits</source>
        <translation type="unfinished">Fixées à </translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1009"/>
        <source>Write Parameters to Result Log</source>
        <translation type="unfinished">Ecrire les paramètres sur la fenêtre de résultats</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1010"/>
        <source>Paste Parameters to Plot</source>
        <translation type="unfinished">Copier les paramètres vers la courbe</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1013"/>
        <source>Peaks Color</source>
        <translation type="unfinished">Couleur des pics</translation>
    </message>
    <message>
        <source>QtiPlot - Import options error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;importation des données</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1038"/>
        <source>The separator must not contain the following characters: 0-9eE.+-</source>
        <translation type="unfinished">Le séparateur ne doit pas contenir un des caractères suivant : 0-9eE.+-</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="901"/>
        <source>Decimal Separators</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="848"/>
        <source>Print</source>
        <translation type="unfinished">Imprimer</translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="850"/>
        <source>&amp;Scale layers to paper size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="875"/>
        <source>Numeric Format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="899"/>
        <source>Use group separator</source>
        <comment>option: use separator every 3 digits</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="903"/>
        <source>default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="915"/>
        <location filename="../src/ConfigDialog.cpp" line="1543"/>
        <source>Preview:</source>
        <comment>preview of the decimal separator</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="918"/>
        <source>&amp;Display Comments in Header</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1003"/>
        <source>2 points for linear fits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="780"/>
        <source>Preferences</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="1037"/>
        <source>Import options error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="849"/>
        <source>Print Crop &amp;Marks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="889"/>
        <source>Default numeric format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="891"/>
        <source>Decimal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="892"/>
        <source>Scientific (e)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="893"/>
        <source>Scientific (E)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="900"/>
        <source>Default Number of Decimal Digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="894"/>
        <source>Automatic (e)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ConfigDialog.cpp" line="895"/>
        <source>Automatic (E)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ControlTabs</name>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="26"/>
        <source>Control Tabs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="54"/>
        <source>Description</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="62"/>
        <source>go to previous column</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="65"/>
        <location filename="../src/future/table/controltabs.ui" line="78"/>
        <source>...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="75"/>
        <source>go to next column</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="88"/>
        <location filename="../src/future/table/controltabs.ui" line="170"/>
        <location filename="../src/future/table/controltabs.ui" line="388"/>
        <source>Appl&amp;y</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="109"/>
        <source>Name:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="128"/>
        <source>Comment:</source>
        <translation type="unfinished">Commentaire :</translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="152"/>
        <source>Type</source>
        <translation type="unfinished">Type</translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="164"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Apply new type and format to all selected columns&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="180"/>
        <source>Type:</source>
        <translation type="unfinished">Type :</translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="202"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Select the column type&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="212"/>
        <location filename="../src/future/table/controltabs.ui" line="244"/>
        <source>Format:</source>
        <translation type="unfinished">Format :</translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="234"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Choose the display format&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="254"/>
        <source>Decimal Digits:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="264"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Enter the number of displayed decimal digits&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="280"/>
        <source>Numbers are</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="290"/>
        <source>since</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="349"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Information about the selected type and format&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="366"/>
        <source>Formula</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="372"/>
        <source>Formula:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="382"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Apply the formula to all selected cells&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="417"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Select a column reference to insert into the formula&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="427"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Insert the column reference into the formula&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="433"/>
        <location filename="../src/future/table/controltabs.ui" line="463"/>
        <source>Add</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="446"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Select a function to insert into the formula&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/controltabs.ui" line="456"/>
        <source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Bitstream Vera Sans&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:&apos;Sans Serif&apos;;&quot;&gt;Insert the function into the formula&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Convolution</name>
    <message>
        <location filename="../src/Convolution.cpp" line="43"/>
        <source>Convolution</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="57"/>
        <location filename="../src/Convolution.cpp" line="64"/>
        <location filename="../src/Convolution.cpp" line="85"/>
        <location filename="../src/Convolution.cpp" line="92"/>
        <location filename="../src/Convolution.cpp" line="117"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="58"/>
        <source>The signal data set %1 does not exist!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="65"/>
        <source>The response data set %1 does not exist!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="86"/>
        <source>The response dataset &apos;%1&apos; must be less then half the size of the signal dataset &apos;%2&apos;!</source>
        <translation type="unfinished">Les données de la réponse &apos;%1&apos; doivent être de moitié inférieure à la taille des données du signal &apos;%2&apos; !</translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="93"/>
        <source>The response dataset &apos;%1&apos; must contain an odd number of points!</source>
        <translation type="unfinished">Les données de la réponse &apos;%1&apos; doivent contenir un nombre de points impaires !</translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="118"/>
        <source>Could not allocate memory, operation aborted!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="151"/>
        <location filename="../src/Convolution.cpp" line="155"/>
        <source>Index</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="159"/>
        <source>Plot</source>
        <translation type="unfinished">Graphe</translation>
    </message>
    <message>
        <location filename="../src/Convolution.cpp" line="57"/>
        <location filename="../src/Convolution.cpp" line="64"/>
        <location filename="../src/Convolution.cpp" line="85"/>
        <location filename="../src/Convolution.cpp" line="92"/>
        <location filename="../src/Convolution.cpp" line="117"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Correlation</name>
    <message>
        <location filename="../src/Correlation.cpp" line="43"/>
        <source>Correlation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/Correlation.cpp" line="57"/>
        <location filename="../src/Correlation.cpp" line="64"/>
        <location filename="../src/Correlation.cpp" line="96"/>
        <location filename="../src/Correlation.cpp" line="126"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/Correlation.cpp" line="58"/>
        <location filename="../src/Correlation.cpp" line="65"/>
        <source>The data set %1 does not exist!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Correlation.cpp" line="97"/>
        <source>Could not allocate memory, operation aborted!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Correlation.cpp" line="127"/>
        <source>Error in GSL forward FFT operation!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Correlation.cpp" line="163"/>
        <location filename="../src/Correlation.cpp" line="167"/>
        <source>Lag</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Correlation.cpp" line="171"/>
        <source>Plot</source>
        <translation type="unfinished">Graphe</translation>
    </message>
    <message>
        <location filename="../src/Correlation.cpp" line="57"/>
        <location filename="../src/Correlation.cpp" line="64"/>
        <location filename="../src/Correlation.cpp" line="96"/>
        <location filename="../src/Correlation.cpp" line="126"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CurveRangeDialog</name>
    <message>
        <location filename="../src/CurveRangeDialog.cpp" line="48"/>
        <source>Data set: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurveRangeDialog.cpp" line="53"/>
        <source>From row number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurveRangeDialog.cpp" line="58"/>
        <source>To row number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurveRangeDialog.cpp" line="64"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/CurveRangeDialog.cpp" line="66"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurveRangeDialog.cpp" line="44"/>
        <source>Plot range</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>CurvesDialog</name>
    <message>
        <source>QtiPlot - Add/Remove curves</source>
        <translation type="obsolete">Qtiplot - Ajouter/Enlever des courbes</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="61"/>
        <source>New curves style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="63"/>
        <source> Line</source>
        <translation type="unfinished"> Ligne</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="64"/>
        <source> Scatter</source>
        <translation type="unfinished"> Nuage de points</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="65"/>
        <source> Line + Symbol</source>
        <translation type="unfinished"> Ligne + Symbole</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="66"/>
        <source> Vertical drop lines</source>
        <translation type="unfinished"> Epingles</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="67"/>
        <source> Spline</source>
        <translation type="unfinished"> Spline</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="68"/>
        <source> Vertical steps</source>
        <translation type="unfinished"> Marches verticales</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="69"/>
        <source> Horizontal steps</source>
        <translation type="unfinished"> Marches horizontales</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="70"/>
        <source> Area</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="71"/>
        <source> Vertical Bars</source>
        <translation type="unfinished"> Barres Verticales</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="72"/>
        <source> Horizontal Bars</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="76"/>
        <source>Contour - Color Fill</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="77"/>
        <source>Contour Lines</source>
        <translation type="unfinished">Lignes du contour</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="78"/>
        <source>Gray Scale Map</source>
        <translation type="unfinished">Carte d&apos;échelle de gris</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="84"/>
        <source>Available data</source>
        <translation type="unfinished">Données disponibles</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="85"/>
        <source>Graph contents</source>
        <translation type="unfinished">Contenu</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="111"/>
        <source>&amp;Plot Associations...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="115"/>
        <source>Edit &amp;Range...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="119"/>
        <source>&amp;Edit Function...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="123"/>
        <source>OK</source>
        <translation type="unfinished">OK</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="127"/>
        <source>Close</source>
        <translation type="unfinished">Fermer</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="130"/>
        <source>&amp;Show Range</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="247"/>
        <source>&amp;Plot Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="249"/>
        <source>&amp;Plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="260"/>
        <source>&amp;Delete Selection</source>
        <translation type="unfinished">Effacer la sélection</translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="262"/>
        <source>&amp;Delete Curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="140"/>
        <source>Show current &amp;folder only</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/CurvesDialog.cpp" line="55"/>
        <source>Add/Remove curves</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DataPickerTool</name>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="72"/>
        <source>Click on plot or move cursor to display coordinates!</source>
        <translation type="unfinished">Cliquez sur le graphe ou déplacez le curseur pour afficher les coordonnées !</translation>
    </message>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="75"/>
        <source>Please, click on plot and move cursor!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="78"/>
        <source>Select point and double click to remove it!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Remove point error</source>
        <translation type="obsolete">QtiPlot - Supprimer l&apos;erreur de point</translation>
    </message>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="304"/>
        <source>Sorry, but removing points of a function is not possible.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Move point error</source>
        <translation type="obsolete">QtiPlot - Déplacer l&apos;erreur de point</translation>
    </message>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="367"/>
        <source>Sorry, but moving points of a function is not possible.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="320"/>
        <location filename="../src/DataPickerTool.cpp" line="387"/>
        <source>This operation cannot be performed on curves plotted from columns having a non-numerical format.</source>
        <translation type="unfinished">Cette opération ne peut être réalisée sur des courbes ayant des colonnes au format non numérique.</translation>
    </message>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="303"/>
        <source>Remove point error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="319"/>
        <location filename="../src/DataPickerTool.cpp" line="386"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/DataPickerTool.cpp" line="366"/>
        <source>Move point error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>DataSetDialog</name>
    <message>
        <location filename="../src/DataSetDialog.cpp" line="61"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/DataSetDialog.cpp" line="66"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/DataSetDialog.cpp" line="45"/>
        <source>Select data set</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Deconvolution</name>
    <message>
        <location filename="../src/Convolution.cpp" line="229"/>
        <source>Deconvolution</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Differentiation</name>
    <message>
        <location filename="../src/Differentiation.cpp" line="58"/>
        <location filename="../src/Differentiation.cpp" line="76"/>
        <location filename="../src/Differentiation.cpp" line="77"/>
        <location filename="../src/Differentiation.cpp" line="80"/>
        <source>Derivative</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Differentiation.cpp" line="76"/>
        <location filename="../src/Differentiation.cpp" line="80"/>
        <source>of</source>
        <comment>Derivative of</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Differentiation.cpp" line="77"/>
        <source>Plot</source>
        <translation type="unfinished">Graphe</translation>
    </message>
    <message>
        <location filename="../src/Differentiation.cpp" line="64"/>
        <source>1</source>
        <comment>differention table x column name</comment>
        <translation type="unfinished">1</translation>
    </message>
    <message>
        <location filename="../src/Differentiation.cpp" line="65"/>
        <source>2</source>
        <comment>differention table y column name</comment>
        <translation type="unfinished">2</translation>
    </message>
</context>
<context>
    <name>DimensionsDialog</name>
    <message>
        <location filename="../src/future/table/DimensionsDialog.ui" line="13"/>
        <source>Dialog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/DimensionsDialog.ui" line="21"/>
        <source>Rows</source>
        <translation type="unfinished">Rangées</translation>
    </message>
    <message>
        <location filename="../src/future/table/DimensionsDialog.ui" line="39"/>
        <source>Columns</source>
        <translation type="unfinished">Colonnes</translation>
    </message>
</context>
<context>
    <name>Double2StringFilter</name>
    <message>
        <location filename="../src/future/core/datatypes/Double2StringFilter.cpp" line="51"/>
        <source>missing or invalid format attribute(s)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>EpsExportDialog</name>
    <message>
        <source>Orientation</source>
        <translation type="obsolete">Orientation</translation>
    </message>
    <message>
        <source>Page Size</source>
        <translation type="obsolete">Format de la Page</translation>
    </message>
    <message>
        <source>&amp;Print in color if available</source>
        <translation type="obsolete">Im&amp;primer en couleur si c&apos;est possible</translation>
    </message>
    <message>
        <source>QtiPlot - Export options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;exportation</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>Landscape</source>
        <translation type="obsolete">Paysage</translation>
    </message>
    <message>
        <source>Portrait</source>
        <translation type="obsolete">Portrait</translation>
    </message>
</context>
<context>
    <name>ErrDialog</name>
    <message>
        <location filename="../src/ErrDialog.cpp" line="65"/>
        <location filename="../src/ErrDialog.cpp" line="198"/>
        <source>Source of errors</source>
        <translation type="unfinished">Origine des erreurs</translation>
    </message>
    <message>
        <source>QtiPlot - Error Bars</source>
        <translation type="obsolete">Qtiplot - Barres d&apos;erreurs</translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="195"/>
        <source>&amp;X Error Bars</source>
        <translation type="unfinished">Barres d&apos;erreurs en &amp;abscisses</translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="196"/>
        <source>&amp;Add</source>
        <translation type="unfinished">&amp;Ajouter</translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="197"/>
        <source>Add Error Bars to</source>
        <translation type="unfinished">Ajouter des barres d&apos;erreurs à</translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="199"/>
        <source>Percent of data (%)</source>
        <translation type="unfinished">Pourcentage sur les données (%)</translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="200"/>
        <source>5</source>
        <translation type="unfinished">5</translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="201"/>
        <source>Standard Deviation of Data</source>
        <translation type="unfinished">Ecart-Type des données</translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="202"/>
        <source>&amp;Y Error Bars</source>
        <translation type="unfinished">Barres d&apos;erreurs en &amp;ordonnées</translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="203"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ErrDialog.cpp" line="194"/>
        <source>Error Bars</source>
        <translation type="unfinished">Barres d&apos;erreurs</translation>
    </message>
</context>
<context>
    <name>ExpDecayDialog</name>
    <message>
        <source>QtiPlot - Verify initial guesses</source>
        <translation type="obsolete">Qtiplot - Vérifier les paramètres initiaux</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="53"/>
        <source>Exponential Fit of</source>
        <translation type="unfinished">Ajustement de</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="60"/>
        <source>Growth time</source>
        <translation type="unfinished">Durée d&apos;accroissement</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="62"/>
        <source>Decay time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="64"/>
        <source>First decay time (t1)</source>
        <translation type="unfinished">Première constante de temps (t1)</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="68"/>
        <location filename="../src/ExpDecayDialog.cpp" line="76"/>
        <location filename="../src/ExpDecayDialog.cpp" line="83"/>
        <location filename="../src/ExpDecayDialog.cpp" line="97"/>
        <source>1</source>
        <translation type="unfinished">1</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="73"/>
        <source>Second decay time (t2)</source>
        <translation type="unfinished">Deuxième constante de temps (t2)</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="79"/>
        <source>Third decay time (t3)</source>
        <translation type="unfinished">Troisième constante de temps (t3)</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="95"/>
        <source>Amplitude</source>
        <translation type="unfinished">Amplitude</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="101"/>
        <source>Y Offset</source>
        <translation type="unfinished">Décalage en Y</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="103"/>
        <location filename="../src/ExpDecayDialog.cpp" line="109"/>
        <source>0</source>
        <translation type="unfinished">0</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="106"/>
        <source>Initial time</source>
        <translation type="unfinished">Temps initial</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="112"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="119"/>
        <source>&amp;Fit</source>
        <translation type="unfinished">&amp;Calculer</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="122"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="196"/>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="unfinished">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="49"/>
        <source>Verify initial guesses</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExpDecayDialog.cpp" line="195"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExponentialFit</name>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="80"/>
        <source>Exponential growth</source>
        <translation>Croissance exponentielle</translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="82"/>
        <location filename="../src/ExponentialFit.cpp" line="89"/>
        <source>(amplitude)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="82"/>
        <source>(lifetime)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="82"/>
        <location filename="../src/ExponentialFit.cpp" line="89"/>
        <source>(offset)</source>
        <translation type="unfinished">(décalage)</translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="87"/>
        <source>Exponential decay</source>
        <translation>Décroissance exponentielle</translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="89"/>
        <source>(e-folding time)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExportDialog</name>
    <message>
        <source>QtiPlot - Export ASCII</source>
        <translation type="obsolete">Qtiplot - Exporter en texte ASCII</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="45"/>
        <source>Table</source>
        <translation type="unfinished">Table</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="50"/>
        <source>&amp;All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="54"/>
        <source>Separator</source>
        <translation type="unfinished">Séparateur</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="58"/>
        <location filename="../src/ExportDialog.cpp" line="60"/>
        <location filename="../src/ExportDialog.cpp" line="61"/>
        <location filename="../src/ExportDialog.cpp" line="136"/>
        <source>TAB</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="59"/>
        <location filename="../src/ExportDialog.cpp" line="62"/>
        <location filename="../src/ExportDialog.cpp" line="63"/>
        <location filename="../src/ExportDialog.cpp" line="137"/>
        <source>SPACE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="70"/>
        <location filename="../src/ExportDialog.cpp" line="113"/>
        <source>The column separator can be customized. The following special codes can be used:
\t for a TAB character 
\s for a SPACE</source>
        <translation type="unfinished">Le séparateur de colonne peut être personnalisé. Les codes spéciaux suivant peuvent être utilisés :
\t pour une tabulation
\s pour une espace</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="71"/>
        <location filename="../src/ExportDialog.cpp" line="114"/>
        <location filename="../src/ExportDialog.cpp" line="144"/>
        <source>The separator must not contain the following characters: 0-9eE.+-</source>
        <translation type="unfinished">Le séparateur ne doit pas contenir un des caractères suivant : 0-9eE.+-</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="78"/>
        <source>Include Column &amp;Names</source>
        <translation type="unfinished">Insérer les &amp;Noms des Colonnes</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="81"/>
        <source>Export &amp;Selection</source>
        <translation type="unfinished">Exporter la &amp;Sélection</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="90"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="93"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="95"/>
        <source>&amp;Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Help</source>
        <translation type="obsolete">QtiPlot - Aide</translation>
    </message>
    <message>
        <source>QtiPlot - Import options error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;importation des données</translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="41"/>
        <source>Export ASCII</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="115"/>
        <source>Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExportDialog.cpp" line="143"/>
        <source>Import options error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ExtensibleFileDialog</name>
    <message>
        <location filename="../src/ExtensibleFileDialog.cpp" line="38"/>
        <source>&lt;&lt; &amp;Advanced</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FFT</name>
    <message>
        <location filename="../src/FFT.cpp" line="57"/>
        <location filename="../src/FFT.cpp" line="86"/>
        <location filename="../src/FFT.cpp" line="108"/>
        <source>FFT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="75"/>
        <location filename="../src/FFT.cpp" line="94"/>
        <location filename="../src/FFT.cpp" line="117"/>
        <location filename="../src/FFT.cpp" line="195"/>
        <location filename="../src/FFT.cpp" line="343"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="76"/>
        <location filename="../src/FFT.cpp" line="95"/>
        <location filename="../src/FFT.cpp" line="118"/>
        <location filename="../src/FFT.cpp" line="196"/>
        <location filename="../src/FFT.cpp" line="344"/>
        <source>Could not allocate memory, operation aborted!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="86"/>
        <source>Forward</source>
        <translation type="unfinished">Suivant</translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="86"/>
        <location filename="../src/FFT.cpp" line="108"/>
        <source>of</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="87"/>
        <location filename="../src/FFT.cpp" line="206"/>
        <location filename="../src/FFT.cpp" line="299"/>
        <source>Frequency</source>
        <translation type="unfinished">Fréquence</translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="108"/>
        <source>Inverse</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="109"/>
        <location filename="../src/FFT.cpp" line="211"/>
        <location filename="../src/FFT.cpp" line="301"/>
        <source>Time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="158"/>
        <location filename="../src/FFT.cpp" line="245"/>
        <source>Real</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="159"/>
        <location filename="../src/FFT.cpp" line="246"/>
        <source>Imaginary</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="160"/>
        <location filename="../src/FFT.cpp" line="247"/>
        <location filename="../src/FFT.cpp" line="287"/>
        <location filename="../src/FFT.cpp" line="303"/>
        <source>Amplitude</source>
        <translation type="unfinished">Amplitude</translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="161"/>
        <location filename="../src/FFT.cpp" line="248"/>
        <source>Angle</source>
        <translation type="unfinished">Angle</translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="299"/>
        <source>Hz</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="301"/>
        <source>s</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFT.cpp" line="75"/>
        <location filename="../src/FFT.cpp" line="94"/>
        <location filename="../src/FFT.cpp" line="117"/>
        <location filename="../src/FFT.cpp" line="195"/>
        <location filename="../src/FFT.cpp" line="343"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FFTDialog</name>
    <message>
        <source>QtiPlot - FFT Options</source>
        <translation type="obsolete">QtiPlot - Options FFT</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="70"/>
        <source>Curve</source>
        <translation>Courbe</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="88"/>
        <location filename="../src/FFTDialog.cpp" line="93"/>
        <source>Sampling Interval</source>
        <translation>Période d&apos;échantillonnage</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="99"/>
        <source>&amp;Normalize Amplitude</source>
        <translation>Amplitude &amp;normalisée</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="102"/>
        <source>&amp;Shift Results</source>
        <translation>Fréquence centrée autour de 0 Hz</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="59"/>
        <source>&amp;Inverse</source>
        <translation>&amp;Inverse</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="57"/>
        <source>&amp;Forward</source>
        <translation>Directe</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="112"/>
        <source>&amp;OK</source>
        <translation>&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="114"/>
        <source>&amp;Close</source>
        <translation>&amp;Fermer</translation>
    </message>
    <message>
        <source>QtiPlot - Sampling value error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;échantillonnage</translation>
    </message>
    <message>
        <source>Frequency</source>
        <translation type="obsolete">Fréquence</translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="obsolete">Temps</translation>
    </message>
    <message>
        <source>Amplitude</source>
        <translation type="obsolete">Amplitude</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="72"/>
        <source>Sampling</source>
        <translation>Echantillons</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="80"/>
        <source>Real</source>
        <translation>Partie réelle</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="84"/>
        <source>Imaginary</source>
        <translation>Partie imaginaire</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="159"/>
        <source>Please choose a column for the real part of the data!</source>
        <translation>Choisissez une colonne pour la partie réelle des données !</translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="51"/>
        <source>FFT Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="144"/>
        <source>Sampling value error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTDialog.cpp" line="159"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
</context>
<context>
    <name>FFTFilter</name>
    <message>
        <location filename="../src/FFTFilter.cpp" line="53"/>
        <source>FFT</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="53"/>
        <source>Filtered</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="66"/>
        <location filename="../src/FFTFilter.cpp" line="88"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="67"/>
        <source>Unknown filter type. Valid values are: 1 - Low pass, 2 - High Pass, 3 - Band Pass, 4 - Band block.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="89"/>
        <source>Please enter different values for the band limits.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="124"/>
        <source>to</source>
        <translation type="unfinished">à</translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="125"/>
        <source>Hz</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="130"/>
        <source>Low Pass FFT Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="136"/>
        <source>High Pass FFT Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="142"/>
        <source>Band Pass FFT Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="149"/>
        <source>Band Block FFT Filter</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FFTFilter.cpp" line="66"/>
        <location filename="../src/FFTFilter.cpp" line="88"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Filter</name>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="78"/>
        <location filename="../src/Filter.cpp" line="111"/>
        <location filename="../src/Filter.cpp" line="204"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="79"/>
        <source>Please assign a curve first!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="112"/>
        <source>You need at least %1 points in order to perform this operation!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="123"/>
        <source>Please enter a valid curve name!</source>
        <translation type="unfinished">Veuillez entrez un nom de courbe valide !</translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="177"/>
        <source>The color name &apos;%1&apos; is not valid, a default color (red) will be used instead!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="205"/>
        <source>You didn&apos;t specify a valid data set for this operation!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="304"/>
        <source>of</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="78"/>
        <location filename="../src/Filter.cpp" line="111"/>
        <location filename="../src/Filter.cpp" line="204"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="122"/>
        <source>Filter Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="176"/>
        <source>Color Name Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="294"/>
        <source>1</source>
        <comment>filter table x column name</comment>
        <translation type="unfinished">1</translation>
    </message>
    <message>
        <location filename="../src/Filter.cpp" line="295"/>
        <source>2</source>
        <comment>filter table y column name</comment>
        <translation type="unfinished">2</translation>
    </message>
</context>
<context>
    <name>FilterDialog</name>
    <message>
        <source>QtiPlot - Filter options</source>
        <translation type="obsolete">QtiPlot - Options du filtre</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="52"/>
        <source>Filter curve: </source>
        <translation type="unfinished">Filtrer : </translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="58"/>
        <source>Frequency cutoff (Hz)</source>
        <translation type="unfinished">Fréquence de coupure (Hz)</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="60"/>
        <source>Low Frequency (Hz)</source>
        <translation type="unfinished">Fréquence de coupure basse (Hz)</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="63"/>
        <location filename="../src/FilterDialog.cpp" line="73"/>
        <source>0</source>
        <translation type="unfinished">0</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="70"/>
        <source>High Frequency (Hz)</source>
        <translation type="unfinished">Fréquence de coupure haute (Hz)</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="77"/>
        <source>Add DC Offset</source>
        <translation type="unfinished">Tenir compte de la composante continue</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="79"/>
        <source>Substract DC Offset</source>
        <translation type="unfinished">Supprimer la composante continue</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="84"/>
        <location filename="../src/FilterDialog.cpp" line="90"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="95"/>
        <source>&amp;Filter</source>
        <translation type="unfinished">&amp;Calculer</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="97"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Frequency input error</source>
        <translation type="obsolete">QtiPlot - Erreur de la fréquence d&apos;entrée</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="131"/>
        <location filename="../src/FilterDialog.cpp" line="154"/>
        <source>Please enter positive frequency values!</source>
        <translation type="unfinished">Donnez des valeurs de fréquences positives !</translation>
    </message>
    <message>
        <source>QtiPlot - High Frequency input error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite de départ</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="162"/>
        <source>Please enter frequency limits that satisfy: Low &lt; High !</source>
        <translation type="unfinished">Donnez des limites de fréquences dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="47"/>
        <source>Filter options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="123"/>
        <location filename="../src/FilterDialog.cpp" line="130"/>
        <location filename="../src/FilterDialog.cpp" line="161"/>
        <source>Frequency input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FilterDialog.cpp" line="146"/>
        <location filename="../src/FilterDialog.cpp" line="153"/>
        <source>High Frequency input error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FindDialog</name>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="46"/>
        <location filename="../src/FindDialog.cpp" line="58"/>
        <source>Find</source>
        <translation type="unfinished">Chercher</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="52"/>
        <source>Start From</source>
        <translation type="unfinished">A partir de </translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="70"/>
        <source>Search in</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="73"/>
        <source>&amp;Window Names</source>
        <translation type="unfinished">Noms des fenêtres</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="77"/>
        <source>Window &amp;Labels</source>
        <translation type="unfinished">&amp;Labels des fenêtres</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="81"/>
        <source>Folder &amp;Names</source>
        <translation type="unfinished">Noms de dossiers</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="87"/>
        <source>Case &amp;Sensitive</source>
        <translation type="unfinished">Respecter la casse</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="91"/>
        <source>&amp;Partial Match Allowed</source>
        <translation type="unfinished">Correspondance &amp;partielle autorisée</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="95"/>
        <source>&amp;Include Subfolders</source>
        <translation type="unfinished">&amp;Inclure les sous-dossiers</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="99"/>
        <source>&amp;Find</source>
        <translation type="unfinished">Chercher</translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="103"/>
        <source>&amp;Update Start Path</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="105"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FindDialog.cpp" line="46"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Fit</name>
    <message>
        <source>QtiPlot - Fit Error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;ajustement</translation>
    </message>
    <message>
        <source>No curve assigned to the fitter! Please assign a curve first!</source>
        <translation type="obsolete">Aucune courbe assignée pour l&apos;ajustement. Asssignez une courbe !</translation>
    </message>
    <message>
        <source>Please enter a valid curve name!</source>
        <translation type="obsolete">Veuillez entrez un nom de courbe valide !</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="224"/>
        <source>Plot</source>
        <translation>Graphe</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="225"/>
        <source>fit of dataset</source>
        <translation>Ajustement des données</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="227"/>
        <source>using function</source>
        <translation>utilisant la fonction</translation>
    </message>
    <message>
        <source>Weighting Method</source>
        <translation type="obsolete">Méthode de pondération</translation>
    </message>
    <message>
        <source>No weighting</source>
        <translation type="obsolete">Aucun poids</translation>
    </message>
    <message>
        <source>Instrumental</source>
        <translation type="obsolete">Instrumentation</translation>
    </message>
    <message>
        <source>using error bars dataset</source>
        <translation type="obsolete">utilisant les données en barres d&apos;erreurs</translation>
    </message>
    <message>
        <source>Statistical</source>
        <translation type="obsolete">Statistique</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="244"/>
        <source>Arbitrary Dataset</source>
        <translation>Données aléatoires</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="252"/>
        <source>Nelder-Mead Simplex</source>
        <translation>Simplex Nelder-Mead</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="254"/>
        <source>Unscaled Levenberg-Marquardt</source>
        <translation>Levenberg-Marquardt</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="256"/>
        <source>Scaled Levenberg-Marquardt</source>
        <translation>Levenberg-Marquardt Normalisé</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="258"/>
        <source> algorithm with tolerance = </source>
        <translation> algorithme avec une tolérence de </translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="261"/>
        <source>From x</source>
        <translation>De x </translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="261"/>
        <source>to x</source>
        <translation>à x </translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="274"/>
        <location filename="../src/Fit.cpp" line="314"/>
        <source>R^2</source>
        <translation>R^2</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="278"/>
        <source>Iterations</source>
        <translation>Nombre d&apos;itérations</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="279"/>
        <source>Status</source>
        <translation>Etat</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="309"/>
        <source>Dataset</source>
        <translation>Données</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="310"/>
        <source>Function</source>
        <translation>Fonction</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="362"/>
        <location filename="../src/Fit.cpp" line="393"/>
        <location filename="../src/Fit.cpp" line="413"/>
        <source>Error</source>
        <translation>Erreur</translation>
    </message>
    <message>
        <source>The curve %1 has no associated Y error bars. You cannot use instrumental weighting method.</source>
        <translation type="obsolete">La courbe %1 n&apos;a pas de barres d&apos;erreurs asociées en Y. Vous ne pouvez pas .</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="413"/>
        <source>Parameter</source>
        <translation>Paramètre</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="413"/>
        <source>Value</source>
        <translation>Valeur</translation>
    </message>
    <message>
        <source>You didn&apos;t specify a data set for this fit operation. Operation aborted!</source>
        <translation type="obsolete">Vous n&apos;avez pas spécifié de données pour cette opération. Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="483"/>
        <source>There are no parameters specified for this fit operation. Operation aborted!</source>
        <translation>Aucun paramètre spécifée pour cette opération. Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="495"/>
        <source>You must specify a valid fit function first. Operation aborted!</source>
        <translation>Vous devez d&apos;abord spécifier une fonction d&apos;ajustement valide. Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="616"/>
        <source>Fit</source>
        <translation>Ajustement</translation>
    </message>
    <message>
        <source> of </source>
        <translation type="obsolete"> de </translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <source>You need at least %1 points to perform this operation! Operation aborted!</source>
        <translation type="obsolete">Il faut au moins %1 points pour réaliser cette opération ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="394"/>
        <source>The column %1 has less points than the fitted data set. Please choose another column!.</source>
        <translation>La colonne %1 possède moins de points que les données ajustées. Veuillez choisir une autre colonne !.</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="477"/>
        <source>You didn&apos;t specify a valid data set for this fit operation. Operation aborted!</source>
        <translation>Vous n&apos;avez pas spécifiés des données valides pour cette opération d&apos;ajustement. Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="489"/>
        <source>You need at least %1 data points for this fit operation. Operation aborted!</source>
        <translation>Il faut au moins %1 points pour réaliser cette opération ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="476"/>
        <location filename="../src/Fit.cpp" line="482"/>
        <location filename="../src/Fit.cpp" line="488"/>
        <location filename="../src/Fit.cpp" line="494"/>
        <source>Fit Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="231"/>
        <source>Y standard errors</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="235"/>
        <source>Unknown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="238"/>
        <source>Associated dataset (%1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="241"/>
        <source>Statistical (assuming Poisson distribution)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="363"/>
        <source>The curve %1 has no associated Y error bars.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Fit.cpp" line="528"/>
        <source>Input function error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FitDialog</name>
    <message>
        <location filename="../src/FitDialog.cpp" line="100"/>
        <source>Curve</source>
        <translation type="unfinished">Courbe</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="103"/>
        <location filename="../src/FitDialog.cpp" line="227"/>
        <source>Function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="113"/>
        <source>Initial guesses</source>
        <translation type="unfinished">Estimation initiale des paramètres</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="121"/>
        <source>Parameter</source>
        <translation type="unfinished">Paramètre</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="121"/>
        <source>Value</source>
        <translation type="unfinished">Valeur</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="121"/>
        <source>Constant</source>
        <translation type="unfinished">Constante</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="127"/>
        <source>Algorithm</source>
        <translation type="unfinished">Algorithme</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="129"/>
        <source>Scaled Levenberg-Marquardt</source>
        <translation type="unfinished">Levenberg-Marquardt Normalisé</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="130"/>
        <source>Unscaled Levenberg-Marquardt</source>
        <translation type="unfinished">Levenberg-Marquardt</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="131"/>
        <source>Nelder-Mead Simplex</source>
        <translation type="unfinished">Simplex Nelder-Mead</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="134"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="143"/>
        <source>From x=</source>
        <translation type="unfinished">De x = </translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="146"/>
        <source>To x=</source>
        <translation type="unfinished">à x = </translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="153"/>
        <source>Iterations</source>
        <translation type="unfinished">Nombre d&apos;itérations</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="159"/>
        <source>Tolerance</source>
        <translation type="unfinished">Tolérance</translation>
    </message>
    <message>
        <source>Weighting Method</source>
        <translation type="obsolete">Méthode de pondération</translation>
    </message>
    <message>
        <source>Statistical</source>
        <translation type="obsolete">Statistique</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="175"/>
        <source>Arbitrary Dataset</source>
        <translation type="unfinished">Données aléatoires</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="188"/>
        <source>&lt;&lt; &amp;Edit function</source>
        <translation type="unfinished">&lt;&lt; Modifi&amp;er la fonction</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="190"/>
        <source>&amp;Delete Fit Curves</source>
        <translation type="unfinished">Supprimer les courbes ajustées</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="192"/>
        <source>&amp;Fit</source>
        <translation type="unfinished">&amp;Calculer</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="195"/>
        <location filename="../src/FitDialog.cpp" line="296"/>
        <location filename="../src/FitDialog.cpp" line="411"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="197"/>
        <source>Custom &amp;Output &gt;&gt;</source>
        <translation type="unfinished">Sortie personnalisée &gt;&gt;</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="226"/>
        <source>Category</source>
        <translation type="unfinished">Catégorie</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="228"/>
        <source>Expression</source>
        <translation type="unfinished">Expression</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="231"/>
        <source>User defined</source>
        <translation type="unfinished">Définie par l&apos;utilisateur</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="232"/>
        <source>Built-in</source>
        <translation type="unfinished">Interne</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="233"/>
        <source>Basic</source>
        <translation type="unfinished">Basique</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="234"/>
        <source>Plugins</source>
        <translation type="unfinished">Extensions</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="244"/>
        <source>Fit with &amp;built-in function</source>
        <translation type="unfinished">Ajuster avec une fonction interne</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="251"/>
        <location filename="../src/FitDialog.cpp" line="966"/>
        <source>Polynomial Order</source>
        <translation type="unfinished">Ordre</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="262"/>
        <source>&amp;Choose plugins folder...</source>
        <translation type="unfinished">&amp;Choisir le répertoire pour les extensions...</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="266"/>
        <source>Clear user &amp;list</source>
        <translation type="unfinished">Supprimer la &amp;liste utilisateur</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="271"/>
        <source>Name</source>
        <translation type="unfinished">Nom</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="272"/>
        <source>user1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="274"/>
        <source>&amp;Save</source>
        <translation type="unfinished">&amp;Sauvegarder</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="276"/>
        <location filename="../src/FitDialog.cpp" line="376"/>
        <source>Parameters</source>
        <translation type="unfinished">Paramètres</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="279"/>
        <source>&amp;Remove</source>
        <translation type="unfinished">Supprimer</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="290"/>
        <source>Add &amp;expression</source>
        <translation type="unfinished">Ajouter une expression</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="292"/>
        <source>Add &amp;name</source>
        <translation type="unfinished">Ajouter un &amp;nom</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="294"/>
        <source>Rese&amp;t</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="298"/>
        <source>&amp;Fit &gt;&gt;</source>
        <translation type="unfinished">Ajuster &gt;&gt;</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="335"/>
        <source>&amp;Uniform X Function</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="343"/>
        <source>Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="358"/>
        <source>Same X as Fitting &amp;Data</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="363"/>
        <source>Generated Fit Curve</source>
        <translation type="unfinished">Création de l&apos;ajustement de la courbe</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="367"/>
        <source>Significant Digits</source>
        <translation type="unfinished">Fixées à </translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="373"/>
        <source>Parameters &amp;Table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="375"/>
        <location filename="../src/FitDialog.cpp" line="380"/>
        <source>Name: </source>
        <translation type="unfinished">Nom : </translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="378"/>
        <source>Covariance &amp;Matrix</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="381"/>
        <source>CovMatrix</source>
        <translation type="unfinished">CovMatrix</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="384"/>
        <source>Scale Errors with sqrt(Chi^2/doF)</source>
        <translation type="unfinished">Échelle d&apos;erreurs avec sqrt(Chi^2/doF)</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="388"/>
        <source>Parameters Output</source>
        <translation type="unfinished">Paramètre de sortie</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="391"/>
        <source>&amp;Write Parameters to Result Log</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="395"/>
        <source>&amp;Paste Parameters to Plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="401"/>
        <source>&lt;&lt; &amp;Fit</source>
        <translation type="unfinished">&lt;&lt; &amp;Ajuster</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="406"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">&amp;Appliquer</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="454"/>
        <source>Please enter a valid name for the parameters table.</source>
        <translation type="unfinished">Veuillez donner un nom valide pour les paramètres de la table.</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="461"/>
        <location filename="../src/FitDialog.cpp" line="483"/>
        <source>Please perform a fit first and try again.</source>
        <translation type="unfinished">Veuillez faire un ajustement et essayer de nouveau.</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="476"/>
        <source>Please enter a valid name for the covariance matrix.</source>
        <translation type="unfinished">Veuillez donner un nom valide pour la matrice de co-variance.</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="543"/>
        <source>Please enter a valid function!</source>
        <translation type="unfinished">Veuillez entrer une fonction valide !</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="550"/>
        <source>Please enter a function name!</source>
        <translation type="unfinished">Veuillez entrer un nom de fonction !</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="557"/>
        <source>Please enter at least one parameter name!</source>
        <translation type="unfinished">Veuillez entrer au moins un nom de paramètre !</translation>
    </message>
    <message>
        <source>QtiPlot - Error: function name</source>
        <translation type="obsolete">Qtiplot - Erreur : fonction non reconnue</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="565"/>
        <source> is a built-in function name&lt;p&gt;You must choose another name for your function!</source>
        <translation type="unfinished"> est un nom de fonction interne&lt;p&gt;Veuillez choisir un autre nom pour votre fonction !</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="573"/>
        <source>You can&apos;t define functions recursevely!</source>
        <translation type="unfinished">Vous en pouvez pas définir de fonctions récursives !</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="828"/>
        <source>Fit with selected &amp;user function</source>
        <translation type="unfinished">Aj&amp;uster par une fonction définie par l&apos;utilisateur</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="835"/>
        <source>Fit using &amp;built-in function</source>
        <translation type="unfinished">Ajuster par une fonction &amp;interne</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="847"/>
        <source>Fit using &amp;plugin function</source>
        <translation type="unfinished">Ajuster par une fonction &amp;externe</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="864"/>
        <source>Choose the plugins folder</source>
        <translation type="unfinished">Choisir le répertoire pour les extensions</translation>
    </message>
    <message>
        <source>Gauss</source>
        <translation type="obsolete">Gauss</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="958"/>
        <location filename="../src/FitDialog.cpp" line="962"/>
        <source>Peaks</source>
        <translation type="unfinished">Pics</translation>
    </message>
    <message>
        <source>Lorentz</source>
        <translation type="obsolete">Lorentz</translation>
    </message>
    <message>
        <source>Polynomial</source>
        <translation type="obsolete">Polynomial</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1033"/>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="unfinished">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1075"/>
        <source>Please enter x limits that satisfy: from &lt; end!</source>
        <translation type="unfinished">Donnez des limites en abscisses dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <source>QtiPlot - Tolerance input error</source>
        <translation type="obsolete">QtiPlot - Erreur sur la valeur de la tolérance</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1096"/>
        <source>The tolerance value must be positive and less than 1!</source>
        <translation type="unfinished">La tolérance doit être un  nombre compris entre 0 et 1 !</translation>
    </message>
    <message>
        <source>Please verify that you have initialized all the parameters!</source>
        <translation type="obsolete">Veuillez vérifier que vous avez inititialisé tous les paramètres !</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1211"/>
        <source>MultiPeak</source>
        <translation type="unfinished">Multi-pics</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1293"/>
        <source>Please enter initial guesses for your parameters!</source>
        <translation type="unfinished">Veuillez entrer des valeurs initiales pour la recherche des paramètres !</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1326"/>
        <location filename="../src/FitDialog.cpp" line="1327"/>
        <source>No data tables</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="69"/>
        <source>Fit Wizard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="453"/>
        <location filename="../src/FitDialog.cpp" line="460"/>
        <location filename="../src/FitDialog.cpp" line="475"/>
        <location filename="../src/FitDialog.cpp" line="482"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="543"/>
        <location filename="../src/FitDialog.cpp" line="549"/>
        <location filename="../src/FitDialog.cpp" line="556"/>
        <location filename="../src/FitDialog.cpp" line="572"/>
        <source>Input function error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="564"/>
        <source>Error: function name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1032"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1054"/>
        <location filename="../src/FitDialog.cpp" line="1306"/>
        <source>Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1067"/>
        <source>End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1074"/>
        <location filename="../src/FitDialog.cpp" line="1292"/>
        <source>Input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="1088"/>
        <location filename="../src/FitDialog.cpp" line="1095"/>
        <source>Tolerance input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="170"/>
        <source>Y Error Source</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="172"/>
        <source>Errors Unknown</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="173"/>
        <source>Associated</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FitDialog.cpp" line="174"/>
        <source>Statistical (Poisson)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Folder</name>
    <message>
        <source>kB</source>
        <translation type="obsolete">kOctects</translation>
    </message>
    <message>
        <source>bytes</source>
        <translation type="obsolete">octects</translation>
    </message>
</context>
<context>
    <name>FunctionCurve</name>
    <message>
        <location filename="../src/FunctionCurve.cpp" line="152"/>
        <source>Input function error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>FunctionDialog</name>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="184"/>
        <source>Clear list</source>
        <translation>Effacer la liste</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="152"/>
        <location filename="../src/FunctionDialog.cpp" line="186"/>
        <source>Clear Function</source>
        <translation>Effacer la fonction</translation>
    </message>
    <message>
        <source>QtiPlot - Add function curve</source>
        <translation type="obsolete">Qtiplot - Ajouter une courbe de fonction</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="53"/>
        <source>Curve type </source>
        <translation>Type de courbe </translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="65"/>
        <source>f(x)= </source>
        <translation>f(x) = </translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="69"/>
        <source>From x= </source>
        <translation>De x =  </translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="73"/>
        <source>To x= </source>
        <translation>à x = </translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="77"/>
        <location filename="../src/FunctionDialog.cpp" line="109"/>
        <location filename="../src/FunctionDialog.cpp" line="141"/>
        <source>Points</source>
        <translation>Points</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="89"/>
        <location filename="../src/FunctionDialog.cpp" line="121"/>
        <source>Parameter</source>
        <translation>Paramètre</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="97"/>
        <location filename="../src/FunctionDialog.cpp" line="129"/>
        <source>To</source>
        <translation>à</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="105"/>
        <source>y = </source>
        <translation>y = </translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="101"/>
        <source>x = </source>
        <translation>x = </translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="93"/>
        <location filename="../src/FunctionDialog.cpp" line="125"/>
        <source>From</source>
        <translation>De</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="133"/>
        <source>R =</source>
        <translation>R = </translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="137"/>
        <source>Theta =</source>
        <translation>Theta = </translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="55"/>
        <source>Function</source>
        <translation>Fonction</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="56"/>
        <source>Parametric plot</source>
        <translation>Courbe paramétrée</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="57"/>
        <source>Polar plot</source>
        <translation>Courbe polaire</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="155"/>
        <source>Close</source>
        <translation>Fermer</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="153"/>
        <source>Ok</source>
        <translation>OK</translation>
    </message>
    <message>
        <source>QtiPlot - Start limit error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite de départ</translation>
    </message>
    <message>
        <source>QtiPlot - End limit error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite d&apos;arrêt</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;entrée des paramètres</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="296"/>
        <source>Please enter x limits that satisfy: from &lt; end!</source>
        <translation>Donnez des limites en abscisses dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <source>QtiPlot - Input function error</source>
        <translation type="obsolete">QtiPlot - Erreur de la fonction d&apos;entrée</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="362"/>
        <location filename="../src/FunctionDialog.cpp" line="430"/>
        <source>Please enter parameter limits that satisfy: from &lt; end!</source>
        <translation>Donnez les limites du paramètre dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="49"/>
        <source>Add function curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="276"/>
        <location filename="../src/FunctionDialog.cpp" line="341"/>
        <location filename="../src/FunctionDialog.cpp" line="409"/>
        <source>Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="288"/>
        <location filename="../src/FunctionDialog.cpp" line="354"/>
        <location filename="../src/FunctionDialog.cpp" line="422"/>
        <source>End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/FunctionDialog.cpp" line="295"/>
        <location filename="../src/FunctionDialog.cpp" line="361"/>
        <location filename="../src/FunctionDialog.cpp" line="429"/>
        <source>Input error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GaussAmpFit</name>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="500"/>
        <source>(offset)</source>
        <translation>(décalage)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="500"/>
        <source>(height)</source>
        <translation>(poids)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="500"/>
        <source>(center)</source>
        <translation>(centre)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="500"/>
        <source>(width)</source>
        <translation>(largeur)</translation>
    </message>
    <message>
        <source>GaussAmp</source>
        <translation type="obsolete">GaussAmp</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="502"/>
        <source>GaussAmp Fit</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>GaussFit</name>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="436"/>
        <location filename="../src/MultiPeakFit.cpp" line="457"/>
        <source>Gauss</source>
        <translation>Gauss</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="437"/>
        <location filename="../src/MultiPeakFit.cpp" line="458"/>
        <source>(area)</source>
        <translation>(surface)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="437"/>
        <location filename="../src/MultiPeakFit.cpp" line="458"/>
        <source>(center)</source>
        <translation>(centre)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="437"/>
        <location filename="../src/MultiPeakFit.cpp" line="458"/>
        <source>(width)</source>
        <translation>(largeur)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="437"/>
        <location filename="../src/MultiPeakFit.cpp" line="458"/>
        <source>(offset)</source>
        <translation>(décalage)</translation>
    </message>
</context>
<context>
    <name>Graph</name>
    <message>
        <source>Choose a filename to save under</source>
        <translation type="obsolete">Choisissez un nom pour sauvegarder ce fichier</translation>
    </message>
    <message>
        <source>QtiPlot - Overwrite File?</source>
        <translation type="obsolete">QtiPlot - Ecraser le fichier?</translation>
    </message>
    <message>
        <source>A file called: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;already exists. Do you want to overwrite it?</source>
        <translation type="obsolete">Un fichier nommé: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;existe déjà. Voulez vous l&apos;écraser?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="obsolete">&amp;Oui</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;Non</translation>
    </message>
    <message>
        <source>QtiPlot - Export Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;exportation</translation>
    </message>
    <message>
        <source>QtiPlot - File open error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;ouverture du fichier</translation>
    </message>
    <message>
        <source>Error - QtiPlot</source>
        <translation type="obsolete">Erreur - QtiPlot</translation>
    </message>
    <message>
        <source>QtiPlot - Pixel selection warning</source>
        <translation type="obsolete">QtiPlot - Avertissement lors de la sélection de pixel</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>You need at least %1 points to perform the fit! Operation aborted!</source>
        <translation type="obsolete">Il faut au moins %1 points pour pouvoir faire cet ajustement ! Opération annulée !</translation>
    </message>
    <message>
        <source>You need at least %1 points to perform this operation! Operation aborted!</source>
        <translation type="obsolete">Il faut au moins %1 points pour pouvoir faire cette opération ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4288"/>
        <location filename="../src/Graph.cpp" line="4334"/>
        <source>&amp;Cut</source>
        <translation>&amp;Couper</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4289"/>
        <location filename="../src/Graph.cpp" line="4335"/>
        <source>&amp;Copy</source>
        <translation>&amp;Copier</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4290"/>
        <location filename="../src/Graph.cpp" line="4336"/>
        <source>&amp;Delete</source>
        <translation>&amp;Supprimer</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4292"/>
        <location filename="../src/Graph.cpp" line="4341"/>
        <location filename="../src/Graph.cpp" line="4345"/>
        <location filename="../src/Graph.cpp" line="4349"/>
        <location filename="../src/Graph.cpp" line="4353"/>
        <location filename="../src/Graph.cpp" line="4384"/>
        <source>&amp;Properties...</source>
        <translation>&amp;Propriétés...</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4366"/>
        <source>&amp;Rescale to show all</source>
        <translation>&amp;Echelle automatique</translation>
    </message>
    <message>
        <source>Ctrl+R</source>
        <translation type="obsolete">Ctrl+R</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4368"/>
        <source>&amp;Hide axis</source>
        <translation>&amp;Cacher les axes</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4370"/>
        <source>&amp;Show grids</source>
        <translation>&amp;Afficher la grille</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4383"/>
        <source>&amp;Scale...</source>
        <translation>&amp;Echelle...</translation>
    </message>
    <message>
        <source>QtiPlot - File not found</source>
        <translation type="obsolete">QtiPlot - Fichier non trouvé</translation>
    </message>
    <message>
        <source>Plugin file: &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt; &lt;p&gt;not found. Operation aborted!</source>
        <translation type="obsolete">Le ficher d&apos;extension : &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt; &lt;p&gt; n&apos;existe pas. Opération annulée !</translation>
    </message>
    <message>
        <source>Error when loading plugin!
</source>
        <translation type="obsolete">Erreur lors du chargement de l&apos;extension !
</translation>
    </message>
    <message>
        <source>Error when loading plugin!</source>
        <translation type="obsolete">Erreur lors du chargement de l&apos;extension !</translation>
    </message>
    <message>
        <source>Frequency</source>
        <translation type="obsolete">Fréquence</translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="obsolete">Temps</translation>
    </message>
    <message>
        <source>Real</source>
        <translation type="obsolete">Réel</translation>
    </message>
    <message>
        <source>Imaginary</source>
        <translation type="obsolete">Imaginaire</translation>
    </message>
    <message>
        <source>Amplitude</source>
        <translation type="obsolete">Amplitude</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="obsolete">Angle</translation>
    </message>
    <message>
        <source>Low Pass FFT Filter of </source>
        <translation type="obsolete">Filtre Passe bas de </translation>
    </message>
    <message>
        <source>High Pass FFT Filter of </source>
        <translation type="obsolete">Filtre Passe haut de </translation>
    </message>
    <message>
        <source>Band Pass FFT Filter of </source>
        <translation type="obsolete">Filtre Passe bande de</translation>
    </message>
    <message>
        <source>Band Block FFT Filter of </source>
        <translation type="obsolete">Filtre réjecteur de</translation>
    </message>
    <message>
        <source>Histogram and Probabilities for</source>
        <translation type="obsolete">Histogramme et Probalités pour </translation>
    </message>
    <message>
        <source>Mean</source>
        <translation type="obsolete">Moyenne</translation>
    </message>
    <message>
        <source>Standard Deviation</source>
        <translation type="obsolete">Ecart-Type</translation>
    </message>
    <message>
        <source>Minimum</source>
        <translation type="obsolete">Minimum</translation>
    </message>
    <message>
        <source>Maximum</source>
        <translation type="obsolete">Maximum</translation>
    </message>
    <message>
        <source>Bins</source>
        <translation type="obsolete">Echantillons</translation>
    </message>
    <message>
        <source>Could not allocate memory, operation aborted!</source>
        <translation type="obsolete">Allocation mémoire impossible, opération annulée !</translation>
    </message>
    <message>
        <source>Curve selected! Move cursor and click to choose a point and double-click/press &apos;Enter&apos; to finish!</source>
        <translation type="obsolete">Courbe sélectionnée ! Déplacez le curseur et cliquez pour choisir un point puis double-cliquez ou appuyez sur &apos;Entrée&apos; pour terminer !</translation>
    </message>
    <message>
        <source>Your data is not valid. You need at least two different points for a histogram!</source>
        <translation type="obsolete">Vos données ne sont pas valides. Il faut au moins 2 points différents pour un histogramme !</translation>
    </message>
    <message>
        <source>QtiPlot - Integration error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;intégration</translation>
    </message>
    <message>
        <source>You need at least 2 points to integrate! Integration aborted!</source>
        <translation type="obsolete">Il faut au moins 2 points pour intégrer ! Intégration annulée !</translation>
    </message>
    <message>
        <source>Several points have the same x value causing divisions by zero, integration aborted!</source>
        <translation type="obsolete">Plusieurs points ont la même valeur en X, causant une division par zéro. Intégration annulée !</translation>
    </message>
    <message>
        <source>Linear regresion of </source>
        <translation type="obsolete">Régression linéaire de </translation>
    </message>
    <message>
        <source>Order</source>
        <translation type="obsolete">Ordre</translation>
    </message>
    <message>
        <source>Polynomial fit of </source>
        <translation type="obsolete">Ajustement polynomial de </translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="5106"/>
        <source>There are no curves available on this plot!</source>
        <translation>Il n&apos;y a pas de courbes disponibles sur ce graphe !</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="5122"/>
        <source>There are no curves with more than two points on this plot. Operation aborted!</source>
        <translation>Il n&apos;y a pas de courbes avec plus de 2 points sur ce graphe. Opération annulée !</translation>
    </message>
    <message>
        <source>All the curves on this plot are empty!</source>
        <translation type="obsolete">Toutes les courbes de ce graphe sont vides !</translation>
    </message>
    <message>
        <source>Peak %1 selected! Click to select a point and double-click/press &apos;Enter&apos; to set the position of the next peak!</source>
        <translation type="obsolete">Pic %1 sélectionné ! Cliquez pour sélectionner un point et double-cliquez (ou pressez &apos;Entrée&apos;) pour fixer la position du prochain pic !</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4278"/>
        <source>The columns</source>
        <translation>Les colonnes</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4278"/>
        <source>are empty and will not be added to the plot!</source>
        <translation>sont vides et ne seront pas ajoutées au graphe !</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4282"/>
        <source>The column</source>
        <translation>La colonne</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4282"/>
        <source>is empty and will not be added to the plot!</source>
        <translation>est vide et ne sera pas ajoutée au graphe !</translation>
    </message>
    <message>
        <source>y0 (offset)</source>
        <translation type="obsolete">y0 (décalage)</translation>
    </message>
    <message>
        <source>Lorentz</source>
        <translation type="obsolete">Lorentz</translation>
    </message>
    <message>
        <source>Gauss</source>
        <translation type="obsolete">Gauss</translation>
    </message>
    <message>
        <source>multi-peak</source>
        <translation type="obsolete">multi-pic</translation>
    </message>
    <message>
        <source>fit of</source>
        <translation type="obsolete">Ajustement de</translation>
    </message>
    <message>
        <source>Non-linear fit of </source>
        <translation type="obsolete">Ajustement non-linéaire de </translation>
    </message>
    <message>
        <source>Non-linear</source>
        <translation type="obsolete">Non-linéaire</translation>
    </message>
    <message>
        <source>Exponential decay fit of </source>
        <translation type="obsolete">Ajustement décroissance exponentielle de </translation>
    </message>
    <message>
        <source>ExpDecay2 fit of </source>
        <translation type="obsolete">Ajustement décroissance exponentielle 2 de </translation>
    </message>
    <message>
        <source>ExpDecay3 fit of </source>
        <translation type="obsolete">Ajustement décroissance exponentielle 3 de </translation>
    </message>
    <message>
        <source>Exponential growth fit of </source>
        <translation type="obsolete">Ajustement croissance exponentielle de </translation>
    </message>
    <message>
        <source>Gauss fit of </source>
        <translation type="obsolete">Ajustement Gaussien de </translation>
    </message>
    <message>
        <source>Lorentz fit of </source>
        <translation type="obsolete">Ajustement Lorentzien de </translation>
    </message>
    <message>
        <source>using function</source>
        <translation type="obsolete">utilisant la fonction</translation>
    </message>
    <message>
        <source>Unscaled Levenberg-Marquardt</source>
        <translation type="obsolete">Levenberg-Marquardt</translation>
    </message>
    <message>
        <source>Scaled Levenberg-Marquardt</source>
        <translation type="obsolete">Levenberg-Marquardt Normalisé</translation>
    </message>
    <message>
        <source> algorithm with tolerance = </source>
        <translation type="obsolete"> algorithme avec une tolérence de </translation>
    </message>
    <message>
        <source>From x=</source>
        <translation type="obsolete">De x = </translation>
    </message>
    <message>
        <source> to x=</source>
        <translation type="obsolete"> à x = </translation>
    </message>
    <message>
        <source>Iterations = </source>
        <translation type="obsolete">Nombre d&apos;itérations</translation>
    </message>
    <message>
        <source>Peak</source>
        <translation type="obsolete">Pic</translation>
    </message>
    <message>
        <source>Height</source>
        <translation type="obsolete">Hauteur</translation>
    </message>
    <message>
        <source>Area</source>
        <translation type="obsolete"> Aire</translation>
    </message>
    <message>
        <source>Center</source>
        <translation type="obsolete">Centre</translation>
    </message>
    <message>
        <source>Width</source>
        <translation type="obsolete">Largeur</translation>
    </message>
    <message>
        <source>Nelder-Mead Simplex</source>
        <translation type="obsolete">Simplex Nelder-Mead</translation>
    </message>
    <message>
        <source>Savitzky-Golay smoothing of </source>
        <translation type="obsolete">Lissage Savitzky-Golay de </translation>
    </message>
    <message>
        <source>A1 (init value)</source>
        <translation type="obsolete">A1 (Valeur initiale)</translation>
    </message>
    <message>
        <source>A2 (final value)</source>
        <translation type="obsolete">A2 (valeur finale)</translation>
    </message>
    <message>
        <source>x0 (center)</source>
        <translation type="obsolete">x0 (centre)</translation>
    </message>
    <message>
        <source>dx (time constant)</source>
        <translation type="obsolete">dx (constante de temps)</translation>
    </message>
    <message>
        <source>Boltzmann (Sigmoidal)</source>
        <translation type="obsolete">Boltzmann (Sigmoïdal)</translation>
    </message>
    <message>
        <source>Boltzmann (Sigmoidal) fit of </source>
        <translation type="obsolete">Ajustement Boltzmann (Sigmoïdal) de </translation>
    </message>
    <message>
        <source>Derivative of</source>
        <translation type="obsolete">Dérivée de </translation>
    </message>
    <message>
        <source>Left</source>
        <translation type="obsolete">Gauche</translation>
    </message>
    <message>
        <source>Right</source>
        <translation type="obsolete">Droite</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="1760"/>
        <source>Title</source>
        <translation>Titre</translation>
    </message>
    <message>
        <source>QtiPlot - Remove point error</source>
        <translation type="obsolete">QtiPlot - Supprimer l&apos;erreur de point</translation>
    </message>
    <message>
        <source>This function is not available for function curves!</source>
        <translation type="obsolete">Cette fonction n&apos;est pas disponible pour courbes de fonctions !</translation>
    </message>
    <message>
        <source>QtiPlot - Move point error</source>
        <translation type="obsolete">QtiPlot - Déplacer l&apos;erreur de point</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="3719"/>
        <location filename="../src/Graph.cpp" line="3749"/>
        <source>Image file: &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt;&lt;p&gt;does not exist anymore!</source>
        <translation>Fichier image : &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt;&lt;p&gt; n&apos;existe plus !</translation>
    </message>
    <message>
        <source>QtiPlot - Input function error</source>
        <translation type="obsolete">QtiPlot - Erreur de la fonction d&apos;entrée</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4366"/>
        <source>Ctrl+Shift+R</source>
        <translation>Ctrl+Shift+R</translation>
    </message>
    <message>
        <source>Quantity</source>
        <translation type="obsolete">Quantité</translation>
    </message>
    <message>
        <source>Sum</source>
        <translation type="obsolete">Somme</translation>
    </message>
    <message>
        <source>Percent</source>
        <translation type="obsolete">Pourcentage</translation>
    </message>
    <message>
        <source>Linear interpolation of </source>
        <translation type="obsolete">Interpolation linéaire de </translation>
    </message>
    <message>
        <source>Cubic interpolation of </source>
        <translation type="obsolete">Interpolation cubique de </translation>
    </message>
    <message>
        <source>Akima interpolation of </source>
        <translation type="obsolete">Interpolation Akima de </translation>
    </message>
    <message>
        <source>Linear regression of </source>
        <translation type="obsolete">Regression linéaire de </translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <source>There is no curve called &apos;%1&apos; on this layer.</source>
        <translation type="obsolete">Aucune courbe nommée &quot;%1&quot; sur cette planche.</translation>
    </message>
    <message>
        <source>There is no curve with index %1 on this layer.</source>
        <translation type="obsolete">Aucune courbe avec un index %1 sur cette planche.</translation>
    </message>
    <message>
        <source>Valid indexes must have values between 0 and %1</source>
        <translation type="obsolete">Les indexes doivent être compris entre 0 et %1</translation>
    </message>
    <message>
        <source>Fit</source>
        <translation type="obsolete">Ajustement</translation>
    </message>
    <message>
        <source>The curve %1 doesn&apos;t exist! Operation aborted!</source>
        <translation type="obsolete">La courbe %1 n&apos;existe plus. Opération annulée !</translation>
    </message>
    <message>
        <source>Please select the start line point inside the image rectangle!</source>
        <translation type="obsolete">Veuillez sélectionner la ligne de départ à l&apos;intérieur du rectangle image !</translation>
    </message>
    <message>
        <source>Please select the end line point inside the image rectangle!</source>
        <translation type="obsolete">Veuillez sélectionner la ligne de fin à l&apos;intérieur du rectangle image !</translation>
    </message>
    <message>
        <source>Smoothed</source>
        <translation type="obsolete">Lissée</translation>
    </message>
    <message>
        <source>points</source>
        <translation type="obsolete">points</translation>
    </message>
    <message>
        <source>FFT Smoothing of</source>
        <translation type="obsolete">FFT lissée de </translation>
    </message>
    <message>
        <source>average mmoothing of</source>
        <translation type="obsolete">moyenne lissée de </translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="1349"/>
        <location filename="../src/Graph.cpp" line="1402"/>
        <source>Please provide a valid file name!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="1367"/>
        <source>File format not handled, operation aborted!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="3978"/>
        <source>Data set generated from curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Table</source>
        <translation type="obsolete">Table</translation>
    </message>
    <message>
        <location filename="../src/Graph.h" line="608"/>
        <source>F</source>
        <translation type="unfinished">F</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="802"/>
        <location filename="../src/Graph.cpp" line="1349"/>
        <location filename="../src/Graph.cpp" line="1367"/>
        <location filename="../src/Graph.cpp" line="1402"/>
        <location filename="../src/Graph.cpp" line="5121"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="3718"/>
        <location filename="../src/Graph.cpp" line="3748"/>
        <source>File open error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="4277"/>
        <location filename="../src/Graph.cpp" line="4281"/>
        <location filename="../src/Graph.cpp" line="5106"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="3969"/>
        <source>1</source>
        <comment>curve data table x column name</comment>
        <translation type="unfinished">1</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="772"/>
        <source>Internal Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="773"/>
        <source>&lt;html&gt;Failed to set axis labels on Graph %1. Maybe you&apos;re trying to open a corrupted project file; or there&apos;s some problem within SciDAVis. Please report this as a bug (together with detailed instructions how to reproduce this message or the corrupted file).&lt;p&gt;&lt;a href=&quot;https://sourceforge.net/tracker/?group_id=199120&amp;atid=968214&gt;&quot;&gt;bug tracker: https://sourceforge.net/tracker/?group_id=199120&amp;atid=968214&lt;/a&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="802"/>
        <source>Couldn&apos;t change the axis type to the requested format!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="3970"/>
        <source>2</source>
        <comment>curve data table y column name</comment>
        <translation type="unfinished">2</translation>
    </message>
    <message>
        <location filename="../src/Graph.cpp" line="3979"/>
        <source>Curve data %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Graph3D</name>
    <message>
        <source>QtiPlot - IO Error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;entrée/Sortie</translation>
    </message>
    <message>
        <source>Choose a filename to save under</source>
        <translation type="obsolete">Choisissez un nom pour sauvegarder ce fichier</translation>
    </message>
    <message>
        <source>QtiPlot - Overwrite File?</source>
        <translation type="obsolete">Qtiplot - Ecraser ce fichier?</translation>
    </message>
    <message>
        <source>A file called: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;already exists. Do you want to overwrite it?</source>
        <translation type="obsolete">Un fichier nommé &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;existe déjà. Voulez-vous l&apos;écraser ?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="obsolete">&amp;Oui</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;Non</translation>
    </message>
    <message>
        <source>QtiPlot - Export Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;exportation</translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/Graph3D.cpp" line="181"/>
        <source>X axis</source>
        <translation>Axe X</translation>
    </message>
    <message>
        <location filename="../src/Graph3D.cpp" line="188"/>
        <source>Y axis</source>
        <translation>Axe Y</translation>
    </message>
    <message>
        <location filename="../src/Graph3D.cpp" line="195"/>
        <source>Z axis</source>
        <translation>Axes Z</translation>
    </message>
    <message>
        <location filename="../src/Graph3D.cpp" line="2064"/>
        <source>Please provide a valid file name!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph3D.cpp" line="2006"/>
        <source>IO Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Graph3D.cpp" line="2064"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/Graph3D.cpp" line="2007"/>
        <source>Could not print: &lt;h4&gt;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImageDialog</name>
    <message>
        <location filename="../src/ImageDialog.cpp" line="40"/>
        <source>Origin</source>
        <translation type="unfinished">Origine</translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="43"/>
        <location filename="../src/ImageDialog.cpp" line="47"/>
        <location filename="../src/ImageDialog.cpp" line="59"/>
        <location filename="../src/ImageDialog.cpp" line="63"/>
        <source> pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="50"/>
        <source>X= </source>
        <translation type="unfinished">X = </translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="52"/>
        <source>Y= </source>
        <translation type="unfinished">Y =  </translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="56"/>
        <source>Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="66"/>
        <source>width= </source>
        <translation type="unfinished">Largeur = </translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="69"/>
        <source>height= </source>
        <translation type="unfinished">Hauteur = </translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="72"/>
        <source>Keep aspect ratio</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="82"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">&amp;Appliquer</translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="83"/>
        <source>&amp;Ok</source>
        <translation type="unfinished">&amp;Ok</translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="84"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageDialog.cpp" line="38"/>
        <source>Image Geometry</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImageExportDialog</name>
    <message>
        <source>QtiPlot - Choose a filename to save under</source>
        <translation type="obsolete">QtiPlot - Choisissez un nom pour sauvegarder ce fichier</translation>
    </message>
    <message>
        <source>Show export &amp;options</source>
        <translation type="obsolete">Afficher les &amp;options d&apos;exportation</translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="91"/>
        <source>Resolution (DPI)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="103"/>
        <source>Export to &amp;standard page size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="154"/>
        <source>&amp;Keep aspect ratio</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="162"/>
        <source>Image quality</source>
        <translation type="unfinished">Qualité de l&apos;image</translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="169"/>
        <source>Save transparency</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="47"/>
        <source>Choose a filename to save under</source>
        <translation type="unfinished">Choisissez un nom pour sauvegarder ce fichier</translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="98"/>
        <source>Export in &amp;color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="107"/>
        <source>A0 - 841 x 1189 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="108"/>
        <source>A1 - 594 x 841 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="109"/>
        <source>A2 - 420 x 594 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="110"/>
        <source>A3 - 297 x 420 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="111"/>
        <source>A4 - 210 x 297 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="112"/>
        <source>A5 - 148 x 210 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="113"/>
        <source>A6 - 105 x 148 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="114"/>
        <source>A7 - 74 x 105 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="115"/>
        <source>A8 - 52 x 74 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="116"/>
        <source>A9 - 37 x 52 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="117"/>
        <source>B0 - 1030 x 1456 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="118"/>
        <source>B1 - 728 x 1030 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="119"/>
        <source>B2 - 515 x 728 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="120"/>
        <source>B3 - 364 x 515 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="121"/>
        <source>B4 - 257 x 364 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="122"/>
        <source>B5 - 182 x 257 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="123"/>
        <source>B6 - 128 x 182 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="124"/>
        <source>B7 - 91 x 128 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="125"/>
        <source>B8 - 64 x 91 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="126"/>
        <source>B9 - 45 x 64 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="127"/>
        <source>B10 - 32 x 45 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="128"/>
        <source>C5E - 163 x 226 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="129"/>
        <source>Comm10E - 105 x 241 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="130"/>
        <source>DLE - 110 x 220 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="131"/>
        <source>Executive - 191 x 254 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="132"/>
        <source>Folio 210 x 330 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="133"/>
        <source>Ledger 432 x 279 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="134"/>
        <source>Legal 216 x 356 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="135"/>
        <source>Letter 216 x 279 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="136"/>
        <source>Tabloid 279 x 432 mm</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="138"/>
        <source>Page size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="144"/>
        <source>Orientation</source>
        <translation type="unfinished">Orientation</translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="146"/>
        <source>Portrait</source>
        <comment>page orientation</comment>
        <translation type="unfinished">Portrait</translation>
    </message>
    <message>
        <location filename="../src/ImageExportDialog.cpp" line="147"/>
        <source>Landscape</source>
        <comment>page orientation</comment>
        <translation type="unfinished">Paysage</translation>
    </message>
</context>
<context>
    <name>ImageExportOptionsDialog</name>
    <message>
        <source>QtiPlot - Export options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;exportation</translation>
    </message>
    <message>
        <source>Image format</source>
        <translation type="obsolete">Format de l&apos;image</translation>
    </message>
    <message>
        <source>Image quality</source>
        <translation type="obsolete">Qualité de l&apos;image</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
</context>
<context>
    <name>ImportASCIIDialog</name>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="50"/>
        <source>All files</source>
        <translation type="unfinished">Tous les fichiers</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="51"/>
        <source>Text files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="52"/>
        <source>Data files</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="53"/>
        <source>Comma Separated Values</source>
        <translation type="unfinished">Valeurs séparées par une virgule</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="89"/>
        <source>Import each file as: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="92"/>
        <source>New Table</source>
        <translation type="unfinished">Nouvelle table</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="93"/>
        <source>New Columns</source>
        <translation type="unfinished">Nouvelles colonnes</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="94"/>
        <source>New Rows</source>
        <translation type="unfinished">Nouvelles rangées</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="95"/>
        <source>Overwrite Current Table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="98"/>
        <source>Separator:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="101"/>
        <location filename="../src/ImportASCIIDialog.cpp" line="103"/>
        <location filename="../src/ImportASCIIDialog.cpp" line="104"/>
        <location filename="../src/ImportASCIIDialog.cpp" line="201"/>
        <location filename="../src/ImportASCIIDialog.cpp" line="203"/>
        <source>TAB</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="102"/>
        <location filename="../src/ImportASCIIDialog.cpp" line="105"/>
        <location filename="../src/ImportASCIIDialog.cpp" line="106"/>
        <location filename="../src/ImportASCIIDialog.cpp" line="205"/>
        <source>SPACE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="113"/>
        <source>The column separator can be customized. 
The following special codes can be used:
\t for a TAB character 
\s for a SPACE</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="114"/>
        <source>The separator must not contain the following characters: 
0-9eE.+-</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="120"/>
        <source>Ignore first</source>
        <translation type="unfinished">Ignorer les premières</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="124"/>
        <source>lines</source>
        <translation type="unfinished">lignes</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="128"/>
        <source>Use first row to &amp;name columns</source>
        <translation type="unfinished">Utiliser la première rangée pour nommer les colonnes</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="131"/>
        <source>&amp;Remove white spaces from line ends</source>
        <translation type="unfinished">Supprime&amp;r les espaces de fin de lignes</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="134"/>
        <source>By checking this option all white spaces will be 
removed from the beginning and the end of 
the lines in the ASCII file.</source>
        <comment>when translating this check the what&apos;s this functions and tool tips to place the &apos;\n&apos;s correctly</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="135"/>
        <source>Warning: checking this option leads to column 
overlaping if the columns in the ASCII file don&apos;t 
have the same number of rows.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="136"/>
        <location filename="../src/ImportASCIIDialog.cpp" line="145"/>
        <source>To avoid this problem you should precisely 
define the column separator using TAB and 
SPACE characters.</source>
        <comment>when translating this check the what&apos;s this functions and tool tips to place the &apos;\n&apos;s correctly</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="140"/>
        <source>&amp;Simplify white spaces</source>
        <translation type="unfinished">&amp;Simplifier les espaces</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="143"/>
        <source>By checking this option all white spaces will be 
removed from the beginning and the end of the 
lines and each sequence of internal 
whitespaces (including the TAB character) will 
be replaced with a single space.</source>
        <comment>when translating this check the what&apos;s this functions and tool tips to place the &apos;\n&apos;s correctly</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="144"/>
        <source>Warning: checking this option leads to column 
overlaping if the columns in the ASCII file don&apos;t 
have the same number of rows.</source>
        <comment>when translating this check the what&apos;s this functions and tool tips to place the &apos;\n&apos;s correctly</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="152"/>
        <source>Decimal Separators</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="154"/>
        <source>default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="162"/>
        <source>Re&amp;member the above options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="164"/>
        <source>&amp;Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="220"/>
        <source>The column separator can be customized. The following special codes can be used:
\t for a TAB character 
\s for a SPACE</source>
        <translation type="unfinished">Le séparateur de colonne peut être personnalisé. Les codes spéciaux suivant peuvent être utilisés :
\t pour une tabulation
\s pour une espace</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="221"/>
        <source>The separator must not contain the following characters: 0-9eE.+-</source>
        <translation type="unfinished">Le séparateur ne doit pas contenir un des caractères suivant : 0-9eE.+-</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="222"/>
        <source>Remove white spaces from line ends</source>
        <translation type="unfinished">Supprimer les espaces de fin de lignes</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="223"/>
        <source>By checking this option all white spaces will be removed from the beginning and the end of the lines in the ASCII file.</source>
        <translation type="unfinished">En validant cette option, toutes les espaces du fichier ASCII seront supprimées.</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="224"/>
        <source>Simplify white spaces</source>
        <translation type="unfinished">Simplifier les espaces</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="225"/>
        <source>By checking this option each sequence of internal whitespaces (including the TAB character) will be replaced with a single space.</source>
        <translation type="unfinished">En validant cette option, toutes les espaces (y compris les tabulations) seront remplacées par une espace unique.</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="226"/>
        <source>By checking this option all white spaces will be removed from the beginning and the end of the lines and each sequence of internal whitespaces (including the TAB character) will be replaced with a single space.</source>
        <translation type="unfinished">En validant cette option, toutes les espaces du fichier seront supprimées et les tabulations seront remplacées par une espace unique.</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="228"/>
        <source>Warning: using these two last options leads to column overlaping if the columns in the ASCII file don&apos;t have the same number of rows.</source>
        <translation type="unfinished">Attention : Utiliser ces deux dernières options entrainera le recouvrement de colonnes si les colonnes du fichier ASCII n&apos;ont pas le même nombre de rangées.</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="229"/>
        <source>To avoid this problem you should precisely define the column separator using TAB and SPACE characters.</source>
        <translation type="unfinished">Pour éviter ce problème, vous devez définir les séparateurs de colonnes à TAB ou à SPACE.</translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="47"/>
        <source>Import ASCII File(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="231"/>
        <source>Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ImportASCIIDialog.cpp" line="149"/>
        <source>&amp;Numeric data</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ImportDialog</name>
    <message>
        <source>QtiPlot - ASCII Import Options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;importation de fichiers ASCII</translation>
    </message>
    <message>
        <source>Separator</source>
        <translation type="obsolete">Séparateur</translation>
    </message>
    <message>
        <source>Ignore first</source>
        <translation type="obsolete">Ignorer les premières</translation>
    </message>
    <message>
        <source>lines</source>
        <translation type="obsolete">lignes</translation>
    </message>
    <message>
        <source>Use first row to &amp;name columns</source>
        <translation type="obsolete">Utiliser la première rangée pour nommer les colonnes</translation>
    </message>
    <message>
        <source>&amp;Remove white spaces from line ends</source>
        <translation type="obsolete">Supprime&amp;r les espaces de fin de lignes</translation>
    </message>
    <message>
        <source>&amp;Simplify white spaces</source>
        <translation type="obsolete">&amp;Simplifier les espaces</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>The column separator can be customized. The following special codes can be used:
\t for a TAB character 
\s for a SPACE</source>
        <translation type="obsolete">Le séparateur de colonne peut être personnalisé. Les codes spéciaux suivant peuvent être utilisés :
\t pour une tabulation
\s pour une espace</translation>
    </message>
    <message>
        <source>The separator must not contain the following characters: 0-9eE.+-</source>
        <translation type="obsolete">Le séparateur ne doit pas contenir un des caractères suivant : 0-9eE.+-</translation>
    </message>
    <message>
        <source>Remove white spaces from line ends</source>
        <translation type="obsolete">Supprimer les espaces de fin de lignes</translation>
    </message>
    <message>
        <source>By checking this option all white spaces will be removed from the beginning and the end of the lines in the ASCII file.</source>
        <translation type="obsolete">En validant cette option, toutes les espaces du fichier ASCII seront supprimées.</translation>
    </message>
    <message>
        <source>Simplify white spaces</source>
        <translation type="obsolete">Simplifier les espaces</translation>
    </message>
    <message>
        <source>By checking this option each sequence of internal whitespaces (including the TAB character) will be replaced with a single space.</source>
        <translation type="obsolete">En validant cette option, toutes les espaces (y compris les tabulations) seront remplacées par une espace unique.</translation>
    </message>
    <message>
        <source>By checking this option all white spaces will be removed from the beginning and the end of the lines and each sequence of internal whitespaces (including the TAB character) will be replaced with a single space.</source>
        <translation type="obsolete">En validant cette option, toutes les espaces du fichier seront supprimées et les tabulations seront remplacées par une espace unique.</translation>
    </message>
    <message>
        <source>Warning: using these two last options leads to column overlaping if the columns in the ASCII file don&apos;t have the same number of rows.</source>
        <translation type="obsolete">Attention : Utiliser ces deux dernières options entrainera le recouvrement de colonnes si les colonnes du fichier ASCII n&apos;ont pas le même nombre de rangées.</translation>
    </message>
    <message>
        <source>To avoid this problem you should precisely define the column separator using TAB and SPACE characters.</source>
        <translation type="obsolete">Pour éviter ce problème, vous devez définir les séparateurs de colonnes à TAB ou à SPACE.</translation>
    </message>
    <message>
        <source>QtiPlot - Help</source>
        <translation type="obsolete">QtiPlot - Aide</translation>
    </message>
    <message>
        <source>QtiPlot - Import options error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;importation des données</translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <source>Do you want to save the modifications to the ASCII import options before closing?</source>
        <translation type="obsolete">Voulez-vous sauvegarder les modifications d&apos;importations des fichiers ASCII ?</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="obsolete">Oui</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="obsolete">Non</translation>
    </message>
</context>
<context>
    <name>ImportFilesDialog</name>
    <message>
        <source>QtiPlot - Import Multiple ASCII Files</source>
        <translation type="obsolete">QtiPlot - Importer plusieurs fichiers ASCII</translation>
    </message>
    <message>
        <source>New Table</source>
        <translation type="obsolete">Nouvelle table</translation>
    </message>
    <message>
        <source>New Columns</source>
        <translation type="obsolete">Nouvelles colonnes</translation>
    </message>
    <message>
        <source>New Rows</source>
        <translation type="obsolete">Nouvelles rangées</translation>
    </message>
    <message>
        <source>All files</source>
        <translation type="obsolete">Tous les fichiers</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">Texte</translation>
    </message>
    <message>
        <source>Data</source>
        <translation type="obsolete">Données</translation>
    </message>
    <message>
        <source>Comma Separated Values</source>
        <translation type="obsolete">Valeurs séparées par une virgule</translation>
    </message>
    <message>
        <source>Import each file as</source>
        <translation type="obsolete">Importer chaque fichier comme</translation>
    </message>
</context>
<context>
    <name>IntDialog</name>
    <message>
        <source>QtiPlot - Integration Options</source>
        <translation type="obsolete">Qtiplot - Options d&apos;intégration</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="54"/>
        <source>Integration of</source>
        <translation type="unfinished">Intégration de</translation>
    </message>
    <message>
        <source>Order (1 - 5, 1 = Trapezoid Rule)</source>
        <translation type="obsolete">Ordre (1 à 5, 1 = méthode des trapêzes)</translation>
    </message>
    <message>
        <source>Number of iterations (Max=40)</source>
        <translation type="obsolete">Nombre d&apos;itérations (Max = 40)</translation>
    </message>
    <message>
        <source>Tolerance</source>
        <translation type="obsolete">Tolérance</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="58"/>
        <source>Interpolation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="60"/>
        <source>Linear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="61"/>
        <source>Cubic</source>
        <translation type="unfinished">Cubique</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="62"/>
        <source>Non-rounded Akima</source>
        <translation type="unfinished">Akima non arrondie</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="65"/>
        <source>Lower limit</source>
        <translation type="unfinished">Limite inférieure</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="69"/>
        <source>Upper limit</source>
        <translation type="unfinished">Limite supérieure</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="74"/>
        <source>&amp;Integrate</source>
        <translation type="unfinished">&amp;Intégrer</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="76"/>
        <source>&amp;Help</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="77"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="102"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="103"/>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="unfinished">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <source>QtiPlot - Tolerance value error</source>
        <translation type="obsolete">QtiPlot - Erreur sur la valeur de la tolérance</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="136"/>
        <source>Please give a number larger or equal to the minimum value of X, for the lower limit.
 If you do not know that value, type min in the box.</source>
        <translation type="unfinished">Donnez un nombre supérieur ou égal à la plus petite valeur de X pour la limite inférieure.
Si vous ne la connaissez pas, tapez &apos;min&apos;.</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="144"/>
        <source>Please give a number smaller or equal to the maximum value of X, for the lower limit.
 If you do not know that value, type max in the box.</source>
        <translation type="unfinished">Donnez un nombre inférieur à la plus petite valeur de X pour la limite inférieure.
Si vous ne la connaissez pas, tapez &apos;max&apos;.</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="192"/>
        <source>Please give a number larger or equal to the minimum value of X, for the upper limit.
 If you do not know that value, type min in the box.</source>
        <translation type="unfinished">Donnez un nombre supérieur ou égal à la plus petite valeur de X pour la limite supérieure.
Si vous ne la connaissez pas, tapez &apos;min&apos;.</translation>
    </message>
    <message>
        <source>QtiPlot - Help for Integration</source>
        <translation type="obsolete">QtiPlot - Aide pour l&apos;intégration</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="262"/>
        <source>The integration of a curve consists of the following five steps:
 1) Choose which curve you want to integrate
 2) Set the order of the integration. The higher it is the more accurate the calculation is
 3) Choose the number of iterations 
 4) Choose the tolerance 
 5) Choose the lower and the upper limit.
 The code integrates the curve with an iterative algorithm. The tolerance determines the termination criteria for the solver.
 Because, sometimes we ask for too much accuracy, the number of iterations makes sure that the solver will not work for ever.
 IMPORTANT 
The limits must be within the range of x; If you do not know the maximum (minimum) value of x, type max (min) in the boxes.</source>
        <translation type="unfinished">L&apos;intégration d&apos;une courbe, consiste à suivre les cinq points suivants :
1) Choisir quelle courbe vous voulez intégrer
2) Fixer l&apos;ordre d&apos;intégration. Plus l&apos;ordre est élevé, meilleure est la précision
3) Choisir le nombre d&apos;itérations
4) Choisir la tolérance
5) Choisir les limites inférieure et supérieure.
Le code intégre la courbe avec un algorithme itératif. La tolérance est le critère de fin d&apos;itération pour le solveur.
Parce que, quelque fois, nous demandons une trop grande précision, le nombre d&apos;itérations assure au solveur de ne pas calculer à l&apos;infini.
IMPORTANT
Les limites doivent être dans la gamme de x ; Si vous ne connaissez pas la valeur maximum (minimum) de x, tapez &apos;max&apos; (&apos;min&apos;) dans les zones d&apos;édition.</translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="102"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="49"/>
        <source>Integration Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="135"/>
        <location filename="../src/IntDialog.cpp" line="143"/>
        <location filename="../src/IntDialog.cpp" line="191"/>
        <source>Input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="152"/>
        <source>Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="200"/>
        <source>End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/IntDialog.cpp" line="261"/>
        <source>Help for Integration</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Integration</name>
    <message>
        <location filename="../src/Integration.cpp" line="63"/>
        <source>Integration</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="85"/>
        <location filename="../src/Integration.cpp" line="117"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="86"/>
        <source>Several data points have the same x value causing divisions by zero, operation aborted!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="100"/>
        <source>Linear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="104"/>
        <source>Cubic</source>
        <translation type="unfinished">Cubique</translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="108"/>
        <source>Akima</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="118"/>
        <source>You need at least %1 points in order to perform this operation!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="123"/>
        <source>Plot</source>
        <translation type="unfinished">Graphe</translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="124"/>
        <source>Numerical integration of</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="124"/>
        <source> using </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="124"/>
        <source>Interpolation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Iterations</source>
        <translation type="obsolete">Nombre d&apos;itérations</translation>
    </message>
    <message>
        <source>Tolerance</source>
        <translation type="obsolete">Tolérance</translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="128"/>
        <source>Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="128"/>
        <source>from</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="129"/>
        <source>to</source>
        <translation type="unfinished">à</translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="138"/>
        <source>Peak at</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="141"/>
        <source>Area</source>
        <translation type="unfinished"> Aire</translation>
    </message>
    <message>
        <location filename="../src/Integration.cpp" line="85"/>
        <location filename="../src/Integration.cpp" line="117"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
</context>
<context>
    <name>Interpolation</name>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="56"/>
        <location filename="../src/Interpolation.cpp" line="86"/>
        <location filename="../src/Interpolation.cpp" line="94"/>
        <location filename="../src/Interpolation.cpp" line="139"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="57"/>
        <source>Unknown interpolation method. Valid values are: 0 - Linear, 1 - Cubic, 2 - Akima.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="65"/>
        <location filename="../src/Interpolation.cpp" line="66"/>
        <source>Linear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="65"/>
        <location filename="../src/Interpolation.cpp" line="69"/>
        <location filename="../src/Interpolation.cpp" line="73"/>
        <source>Int</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="66"/>
        <location filename="../src/Interpolation.cpp" line="70"/>
        <location filename="../src/Interpolation.cpp" line="74"/>
        <source>Interpolation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="69"/>
        <location filename="../src/Interpolation.cpp" line="70"/>
        <source>Cubic</source>
        <translation type="unfinished">Cubique</translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="73"/>
        <location filename="../src/Interpolation.cpp" line="74"/>
        <source>Akima</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="87"/>
        <source>Unknown interpolation method, valid values are: 0 - Linear, 1 - Cubic, 2 - Akima.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="95"/>
        <source>You need at least %1 points in order to perform this operation!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="140"/>
        <source>Several data points have the same x value causing divisions by zero, operation aborted!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Interpolation.cpp" line="56"/>
        <location filename="../src/Interpolation.cpp" line="94"/>
        <location filename="../src/Interpolation.cpp" line="139"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>InterpolationDialog</name>
    <message>
        <source>QtiPlot - Interpolation Options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;interpolation</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="51"/>
        <source>Make curve from</source>
        <translation type="unfinished">Interpolation de : </translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="56"/>
        <source>Spline</source>
        <translation type="unfinished">Interpolation</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="58"/>
        <source>Linear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="59"/>
        <source>Cubic</source>
        <translation type="unfinished">Cubique</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="60"/>
        <source>Non-rounded Akima</source>
        <translation type="unfinished">Akima non arrondie</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="63"/>
        <source>Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="70"/>
        <source>From Xmin</source>
        <translation type="unfinished">De Xmin = </translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="72"/>
        <source>0</source>
        <translation type="unfinished">0</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="75"/>
        <source>To Xmax</source>
        <translation type="unfinished">à Xmax = </translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="79"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="86"/>
        <source>&amp;Make</source>
        <translation type="unfinished">&amp;Calculer</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="88"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="111"/>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="unfinished">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="146"/>
        <source>Please enter x limits that satisfy: from &lt; to!</source>
        <translation type="unfinished">Donnez des limites en abscisses dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="47"/>
        <source>Interpolation Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="110"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="126"/>
        <source>Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="139"/>
        <source>End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/InterpolationDialog.cpp" line="146"/>
        <source>Input error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LayerDialog</name>
    <message>
        <source>QtiPlot - Arrange Layers</source>
        <translation type="obsolete">QtiPlot - Redisposer les planches</translation>
    </message>
    <message>
        <source>Number of Layers</source>
        <translation type="obsolete">Nombre de planches</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="55"/>
        <source>Automatic &amp;layout</source>
        <translation type="unfinished">Redisposer les planches de manière automatique</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="62"/>
        <source>Horizontal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="65"/>
        <location filename="../src/LayerDialog.cpp" line="72"/>
        <source>Center</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="66"/>
        <source>Left</source>
        <translation type="unfinished">Gauche</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="67"/>
        <source>Right</source>
        <translation type="unfinished">Droite</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="70"/>
        <source>Vertical</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="73"/>
        <source>Top</source>
        <translation type="unfinished">Supérieur</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="74"/>
        <source>Bottom</source>
        <translation type="unfinished">Inférieur</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="60"/>
        <source>Alignement</source>
        <translation type="unfinished">Alignement</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="80"/>
        <source>Columns</source>
        <translation type="unfinished">Colonnes</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="84"/>
        <source>Rows</source>
        <translation type="unfinished">Rangées</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="78"/>
        <source>Grid</source>
        <translation type="unfinished">Grille</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="90"/>
        <source>&amp;Layer Canvas Size</source>
        <translation type="unfinished">Tail&amp;le du Canevas des planches</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="95"/>
        <source>Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="99"/>
        <location filename="../src/LayerDialog.cpp" line="105"/>
        <location filename="../src/LayerDialog.cpp" line="114"/>
        <location filename="../src/LayerDialog.cpp" line="120"/>
        <location filename="../src/LayerDialog.cpp" line="126"/>
        <location filename="../src/LayerDialog.cpp" line="132"/>
        <location filename="../src/LayerDialog.cpp" line="138"/>
        <location filename="../src/LayerDialog.cpp" line="144"/>
        <source> pixels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="101"/>
        <source>Height</source>
        <translation type="unfinished">Hauteur</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="110"/>
        <source>Columns gap</source>
        <translation type="unfinished">Ecart entre les colonnes</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="116"/>
        <source>Rows gap</source>
        <translation type="unfinished">Ecart entre les rangées</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="122"/>
        <source>Left margin</source>
        <translation type="unfinished">Marge de gauche</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="128"/>
        <source>Right margin</source>
        <translation type="unfinished">Marge de droite</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="134"/>
        <source>Top margin</source>
        <translation type="unfinished">Marche supérieure</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="140"/>
        <source>Bottom margin</source>
        <translation type="unfinished">Marge inférieure</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="108"/>
        <source>Spacing</source>
        <translation type="unfinished">Espacement</translation>
    </message>
    <message>
        <source>Layout</source>
        <translation type="obsolete">Planche</translation>
    </message>
    <message>
        <source>Titles</source>
        <translation type="obsolete">Titres</translation>
    </message>
    <message>
        <source>Legends</source>
        <translation type="obsolete">Légendes</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="151"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">&amp;Appliquer</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="152"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="153"/>
        <location filename="../src/LayerDialog.cpp" line="211"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Delete Layers?</source>
        <translation type="obsolete">QtiPlot - Effacer les planches ?</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="209"/>
        <source>You are about to delete %1 existing layers.</source>
        <translation type="unfinished">Vous allez supprimer %1 planches existantes.</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="210"/>
        <source>Are you sure you want to continue this operation?</source>
        <translation type="unfinished">Etes vous certain de continuer cette opération ?</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="211"/>
        <source>&amp;Continue</source>
        <translation type="unfinished">&amp;Continuer</translation>
    </message>
    <message>
        <source>QtiPlot - Columns input error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée de la colonne</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="231"/>
        <source>The number of columns you&apos;ve entered is greater than the number of graphs (%1)!</source>
        <translation type="unfinished">Le nombre de colonnes que vous avez donné est plus grand que le nombre de graphes (%1) !</translation>
    </message>
    <message>
        <source>QtiPlot - Rows input error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée de la rangée</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="239"/>
        <source>The number of rows you&apos;ve entered is greater than the number of graphs (%1)!</source>
        <translation type="unfinished">Le nombre de rangées que vous avez donné est plus grand que le nombre de graphes (%1) !</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="48"/>
        <source>Layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="50"/>
        <source>Number</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="46"/>
        <source>Arrange Layers</source>
        <translation type="unfinished">Redisposer les planches</translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="208"/>
        <source>Delete Layers?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="230"/>
        <source>Columns input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LayerDialog.cpp" line="238"/>
        <source>Rows input error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LineDialog</name>
    <message>
        <source>QtiPlot - Line options</source>
        <translation type="obsolete">Qtiplot - Options de la ligne</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="60"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="65"/>
        <source>Line type</source>
        <translation type="unfinished">Type de ligne</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="76"/>
        <source>Line width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="78"/>
        <source>1</source>
        <translation type="unfinished">1</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="79"/>
        <source>2</source>
        <translation type="unfinished">2</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="80"/>
        <source>3</source>
        <translation type="unfinished">3</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="81"/>
        <source>4</source>
        <translation type="unfinished">4</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="82"/>
        <source>5</source>
        <translation type="unfinished">5</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="89"/>
        <source>Arrow at &amp;start</source>
        <translation type="unfinished">Flêche au &amp;début</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="94"/>
        <source>Arrow at &amp;end</source>
        <translation type="unfinished">Flêche à la &amp;fin</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="107"/>
        <source>Opti&amp;ons</source>
        <translation type="unfinished">Opti&amp;ons</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="112"/>
        <source>Length</source>
        <translation type="unfinished">Longueur</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="117"/>
        <source>Angle</source>
        <translation type="unfinished">Angle</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="125"/>
        <source>&amp;Filled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="136"/>
        <source>Arrow &amp;Head</source>
        <translation type="unfinished">&amp;Tête de la flêche</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="140"/>
        <source>Set &amp;Default</source>
        <translation type="unfinished">&amp;Défault</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="141"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">&amp;Appliquer</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="142"/>
        <source>&amp;Ok</source>
        <translation type="unfinished">&amp;Ok</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="168"/>
        <source>Scale Coordinates</source>
        <translation type="unfinished">Echelle des coordonnées</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="169"/>
        <source>Pixels</source>
        <translation type="unfinished">Pixels</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="172"/>
        <source>Unit</source>
        <translation type="unfinished">Unité</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="175"/>
        <source>Start Point</source>
        <translation type="unfinished">Point de départ</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="180"/>
        <location filename="../src/LineDialog.cpp" line="191"/>
        <source>X</source>
        <translation type="unfinished">X</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="182"/>
        <location filename="../src/LineDialog.cpp" line="193"/>
        <source>Y</source>
        <translation type="unfinished">Y</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="186"/>
        <source>End Point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="207"/>
        <source>&amp;Geometry</source>
        <translation type="unfinished">&amp;Géometrie</translation>
    </message>
    <message>
        <location filename="../src/LineDialog.cpp" line="53"/>
        <source>Line options</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LineProfileTool</name>
    <message>
        <location filename="../src/LineProfileTool.cpp" line="92"/>
        <source>pixel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LineProfileTool.cpp" line="95"/>
        <source>intensity</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Table</source>
        <translation type="obsolete">Table</translation>
    </message>
    <message>
        <location filename="../src/LineProfileTool.cpp" line="52"/>
        <location filename="../src/LineProfileTool.cpp" line="65"/>
        <source>Pixel selection warning</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LineProfileTool.cpp" line="93"/>
        <source>x</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LineProfileTool.cpp" line="94"/>
        <source>y</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/LineProfileTool.cpp" line="154"/>
        <source>Line profile %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LinearFit</name>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="240"/>
        <source>(y-intercept)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="240"/>
        <source>(slope)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="241"/>
        <source>Linear Regression</source>
        <translation>Regression linéaire</translation>
    </message>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="242"/>
        <source>Linear</source>
        <translation>Linéaire</translation>
    </message>
    <message>
        <source>QtiPlot - Fit Error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;ajustement</translation>
    </message>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="253"/>
        <source>You need at least %1 data points for this fit operation. Operation aborted!</source>
        <translation>Il faut au moins %1 points pour réaliser cette opération ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="252"/>
        <source>Fit Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>LorentzFit</name>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="422"/>
        <source>Lorentz</source>
        <translation>Lorentz</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="423"/>
        <source>(area)</source>
        <translation>(surface)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="423"/>
        <source>(center)</source>
        <translation>(centre)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="423"/>
        <source>(width)</source>
        <translation>(largeur)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="423"/>
        <source>(offset)</source>
        <translation>(décalage)</translation>
    </message>
</context>
<context>
    <name>Matrix</name>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;entrée des paramètres</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="obsolete">Oui</translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="532"/>
        <source>Cancel</source>
        <translation>&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="304"/>
        <source>Calculation failed, the matrix is not square!</source>
        <translation>Le calcul a échoué car la matrice n&apos;est pas carrée !</translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="335"/>
        <source>Inversion failed, the matrix is not square!</source>
        <translation>L&apos;inversion a échouée car la matrice n&apos;est pas carrée !</translation>
    </message>
    <message>
        <source>The text in the clipboard is larger than your current selection!	        
Do you want to insert cells?</source>
        <translation type="obsolete">Le texte présent dans le presse-papier est plus grand que la sélection !(tab)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(sp)(new line)
Voulez-vous insérer des cellules?</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="obsolete">Non</translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="530"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="303"/>
        <location filename="../src/Matrix.cpp" line="334"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="531"/>
        <source>Do you want to hide or delete</source>
        <translation type="unfinished">Voulez-vous Cacher ou Supprimer</translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="532"/>
        <source>Delete</source>
        <translation type="unfinished">Supprimer</translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="532"/>
        <source>Hide</source>
        <translation type="unfinished">Cacher</translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="724"/>
        <source>Matrix %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Matrix.cpp" line="730"/>
        <source>%1: apply formula to selection</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MatrixControlTabs</name>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="25"/>
        <source>Control Tabs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="53"/>
        <source>Coordinates</source>
        <translation type="unfinished">Coordonnées</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="59"/>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="346"/>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="502"/>
        <source>Appl&amp;y</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="69"/>
        <source>First column X =</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="126"/>
        <source>Last column X =</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="180"/>
        <source>First row Y =</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="328"/>
        <source>Format</source>
        <translation type="unfinished">Format</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="340"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Apply new type and format to all selected columns&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="353"/>
        <source>Format:</source>
        <translation type="unfinished">Format :</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="375"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Choose the display format&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="388"/>
        <source>Decimal Digits:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="398"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Enter the number of displayed decimal digits&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="463"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Information about the selected type and format&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="480"/>
        <source>Formula</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="486"/>
        <source>Formula:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="496"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Apply the formula to all selected cells&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="528"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Select a column reference to insert into the formula&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="538"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Insert the column reference into the formula&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="544"/>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="573"/>
        <source>Add</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="557"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Select a function to insert into the formula&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="567"/>
        <source>&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans Serif&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px;&quot;&gt;Inset the function into the formula&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcontroltabs.ui" line="231"/>
        <source>Last row Y =</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MatrixDialog</name>
    <message>
        <source>Cell Width</source>
        <translation type="obsolete">Largeur des cellules</translation>
    </message>
    <message>
        <source>Data Format</source>
        <translation type="obsolete">Format des données</translation>
    </message>
    <message>
        <source>Numeric Display</source>
        <translation type="obsolete">Nombre de décimales</translation>
    </message>
    <message>
        <source>QtiPlot - Matrix Properties</source>
        <translation type="obsolete">Qtiplot - Propriétés de la matrice</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>Decimal: 1000</source>
        <translation type="obsolete">Décimal : 1000</translation>
    </message>
    <message>
        <source>Scientific: 1E3</source>
        <translation type="obsolete">Scientifique : 1E3</translation>
    </message>
    <message>
        <source>Default Decimal Digits</source>
        <translation type="obsolete">Par défaut</translation>
    </message>
    <message>
        <source>Significant Digits=</source>
        <translation type="obsolete">Fixées à </translation>
    </message>
</context>
<context>
    <name>MatrixSizeDialog</name>
    <message>
        <source>Dimensions</source>
        <translation type="obsolete">Dimensions</translation>
    </message>
    <message>
        <source>Coordinates</source>
        <translation type="obsolete">Coordonnées</translation>
    </message>
    <message>
        <source>Rows</source>
        <translation type="obsolete">Rangées</translation>
    </message>
    <message>
        <source>Columns</source>
        <translation type="obsolete">Colonnes</translation>
    </message>
    <message>
        <source>X (Columns)</source>
        <translation type="obsolete">X (Colonnes)</translation>
    </message>
    <message>
        <source>Y (Rows)</source>
        <translation type="obsolete">Y (Rangées)</translation>
    </message>
    <message>
        <source>First</source>
        <translation type="obsolete">Premier</translation>
    </message>
    <message>
        <source>Last</source>
        <translation type="obsolete">Dernier</translation>
    </message>
    <message>
        <source>QtiPlot - Matrix Dimensions</source>
        <translation type="obsolete">Qtiplot - Taille de la matrice</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
</context>
<context>
    <name>MatrixValuesDialog</name>
    <message>
        <source>QtiPlot - Set Matrix Values</source>
        <translation type="obsolete">Qtiplot - Fixer les valeurs de la matrice</translation>
    </message>
    <message>
        <source>For row (i)</source>
        <translation type="obsolete">Pour la rangée (i)</translation>
    </message>
    <message>
        <source>to</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>For col (j)</source>
        <translation type="obsolete">Pour la colonne (j)</translation>
    </message>
    <message>
        <source>Add function</source>
        <translation type="obsolete">Ajouter la fonction</translation>
    </message>
    <message>
        <source>Add Cell</source>
        <translation type="obsolete">Ajouter la cellule</translation>
    </message>
    <message>
        <source>Cell(i,j)=</source>
        <translation type="obsolete">Cellule(i,j)=</translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="obsolete">OK</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation type="obsolete">Appliquer</translation>
    </message>
</context>
<context>
    <name>MatrixView</name>
    <message>
        <location filename="../src/future/matrix/MatrixView.cpp" line="150"/>
        <source>Ctrl+A</source>
        <comment>Matrix: select all</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/MatrixView.cpp" line="200"/>
        <source>Show/hide control tabs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/MatrixView.cpp" line="203"/>
        <source>Decimal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/MatrixView.cpp" line="204"/>
        <source>Scientific (e)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/MatrixView.cpp" line="205"/>
        <source>Scientific (E)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/MatrixView.cpp" line="507"/>
        <source>Example: %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/MatrixView.cpp" line="206"/>
        <source>Automatic (e)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/MatrixView.cpp" line="207"/>
        <source>Automatic (E)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MuParserScript</name>
    <message>
        <location filename="../src/MuParserScript.cpp" line="269"/>
        <source>col() works only on tables!</source>
        <translation type="unfinished">col() ne fonctionne qu&apos;avec des tables !</translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="272"/>
        <location filename="../src/MuParserScript.cpp" line="307"/>
        <location filename="../src/MuParserScript.cpp" line="349"/>
        <source>There&apos;s no column %1 in table %2!</source>
        <translation type="unfinished">Il n&apos;y a pas de colonne %1 dans la table %2 !</translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="300"/>
        <source>tablecol() works only on tables!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="303"/>
        <location filename="../src/MuParserScript.cpp" line="443"/>
        <location filename="../src/MuParserScript.cpp" line="452"/>
        <location filename="../src/MuParserScript.cpp" line="458"/>
        <source>Couldn&apos;t find a table named %1.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="346"/>
        <location filename="../src/MuParserScript.cpp" line="366"/>
        <source>cell() works only on tables and matrices!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="370"/>
        <source>There&apos;s no row %1 in matrix %2!</source>
        <translation type="unfinished">Il n&apos;y a pas de rangées %1 dans la matrice %2 !</translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="373"/>
        <source>There&apos;s no column %1 in matrix %2!</source>
        <translation type="unfinished">Il n&apos;y a pas de colonne %1 dans la matrice %2 !</translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="420"/>
        <location filename="../src/MuParserScript.cpp" line="426"/>
        <source>Accessing table values is not (yet) supported in this context.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="465"/>
        <source>There&apos;s no column named %1 in table %2!</source>
        <translation type="unfinished">Il y a une colonne nommée %1 dans la table %2 !</translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="576"/>
        <source>tablecol: wrong number of arguments (need 2, got %1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScript.cpp" line="603"/>
        <source>cell: wrong number of arguments (need 2, got %1)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MuParserScripting</name>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="47"/>
        <source>abs(x):
 Absolute value of x.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="48"/>
        <source>acos(x):
 Inverse cos function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="49"/>
        <source>acosh(x):
 Hyperbolic inverse cos function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="50"/>
        <source>asin(x):
 Inverse sin function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="51"/>
        <source>asinh(x):
 Hyperbolic inverse sin function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="52"/>
        <source>atan(x):
 Inverse tan function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="53"/>
        <source>atanh(x):
  Hyperbolic inverse tan function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="54"/>
        <source>avg(x,y,...):
  Mean value of all arguments.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="55"/>
        <source>bessel_j0(x):
  Regular cylindrical Bessel function of zeroth order, J_0(x).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="56"/>
        <source>bessel_j1(x):
  Regular cylindrical Bessel function of first order, J_1(x).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="57"/>
        <source>bessel_jn(double x, int n):
 Regular cylindrical Bessel function of order n, J_n(x).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="58"/>
        <source>bessel_jn_zero(double n, unsigned int s):
 s-th positive zero x_s of regular cylindrical Bessel function of order n, J_n(x_s)=0</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="59"/>
        <source>bessel_y0(x):
 Irregular cylindrical Bessel function of zeroth order, Y_0(x), for x&gt;0.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="60"/>
        <source>bessel_y1(x):
 Irregular cylindrical Bessel function of first order, Y_1(x), for x&gt;0.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="61"/>
        <source>bessel_yn(double x, int n):
 Irregular cylindrical Bessel function of order n, Y_n(x), for x&gt;0.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="62"/>
        <source>beta(a,b):
 Computes the Beta Function, B(a,b) = Gamma(a)*Gamma(b)/Gamma(a+b) for a &gt; 0, b &gt; 0.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="63"/>
        <source>ceil(x):
 Round to the next larger integer,
 smallest integer larger or equal to x.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="64"/>
        <source>cos(x):
 Calculate cosine.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="65"/>
        <source>cosh(x):
 Hyperbolic cos function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="66"/>
        <source>erf(x):
  The error function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="67"/>
        <source>erfc(x):
 Complementary error function erfc(x) = 1 - erf(x).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="68"/>
        <source>erfz(x):
 The Gaussian probability density function Z(x).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="69"/>
        <source>erfq(x):
 The upper tail of the Gaussian probability function Q(x).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="70"/>
        <source>exp(x):
 Exponential function: e raised to the power of x.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="71"/>
        <source>floor(x):
 Round to the next smaller integer,
 largest integer smaller or equal to x.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="72"/>
        <source>gamma(x):
 Computes the Gamma function, subject to x not being a negative integer.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="73"/>
        <source>gammaln(x):
 Computes the logarithm of the Gamma function, subject to x not a being negative integer. For x&lt;0, log(|Gamma(x)|) is returned.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="74"/>
        <source>hazard(x):
 Computes the hazard function for the normal distribution h(x) = erfz(x)/erfq(x).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="75"/>
        <source>if(e1, e2, e3):
 if e1 then e2 else e3.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="76"/>
        <source>ln(x):
 Calculate natural logarithm log_e.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="77"/>
        <source>log(x):
 Calculate decimal logarithm log_10.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="78"/>
        <source>log10(x):
 Calculate decimal logarithm log_10.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="79"/>
        <source>log2(x):
 Calculate binary logarithm log_2.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="80"/>
        <source>min(x,y,...):
 Calculate minimum of all arguments.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="81"/>
        <source>max(x,y,...):
 Calculate maximum of all arguments.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="82"/>
        <source>mod(x,y):
 Calculate rest of integer division x/y,
 x modulo y.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="83"/>
        <source>pow(x,y):
 Raise x to the power of y, x^y.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="84"/>
        <source>rint(x):
 Round to nearest integer.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="85"/>
        <source>sign(x):
 Sign function: -1 if x&lt;0; 1 if x&gt;0.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="86"/>
        <source>sin(x):
 Calculate sine.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="87"/>
        <source>sinh(x):
 Hyperbolic sin function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="88"/>
        <source>sqrt(x):
 Square root function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="89"/>
        <source>sum(x,y,...):
 Calculate sum of all arguments.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="90"/>
        <source>tan(x):
 Calculate tangent function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="91"/>
        <source>tanh(x):
 Hyperbolic tan function.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="92"/>
        <source>w0(x):
 Compute the principal branch of Lambert&apos;s W function, W_0(x).
 W is defined as a solution to the equation W(x)*exp(W(x))=x.
 For x&lt;0, there are two real-valued branches; this function computes the one where W&gt;-1 for x&lt;0 (also see wm1(x)).</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MuParserScripting.cpp" line="93"/>
        <source>wm1(x):
 Compute the secondary branch of Lambert&apos;s W function, W_{-1}(x).
 W is defined as a solution to the equation W(x)*exp(W(x))=x.
 For x&lt;0, there are two real-valued branches; this function computes the one where W&lt;-1 for x&lt;0. (also see w0(x)).</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>MultiLayer</name>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <source>QtiPlot - Guess best origin for the new layer?</source>
        <translation type="obsolete">QtiPlot - Est-ce que Qtiplot doit proposer la meilleure originie pour la nouvelle planche ?</translation>
    </message>
    <message>
        <source>Do you want QtiPlot to rearrange the remaining layers?</source>
        <translation type="obsolete">Voulez-vous que Qtiplot redispose les autres planches ?</translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="290"/>
        <source>&amp;Yes</source>
        <translation>&amp;Oui</translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="290"/>
        <source>&amp;No</source>
        <translation>&amp;Non</translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="290"/>
        <source>&amp;Cancel</source>
        <translation>&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Error: arranging layers failed!</source>
        <translation type="obsolete">Qtiplot - Erreur lors de la disposition des planches !</translation>
    </message>
    <message>
        <source>There is not enaugh space available in this window.&lt;p&gt;You could try to maximize it first and to rearrange the layers using the automatic option!&lt;/p&gt;</source>
        <translation type="obsolete">Il n&apos;y a pas assez de place dans cette fenêtre.&lt;p&gt;Vous devriez agrandir la fenêtre puis redisposer les planches à l&apos;aide de la commande automatique !&lt;/p&gt;</translation>
    </message>
    <message>
        <source>Choose a filename to save under</source>
        <translation type="obsolete">Choisissez un nom pour sauvegarder ce fichier</translation>
    </message>
    <message>
        <source>QtiPlot - Overwrite File?</source>
        <translation type="obsolete">Qtiplot - Ecraser ce fichier?</translation>
    </message>
    <message>
        <source>A file called: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;already exists. Do you want to overwrite it?</source>
        <translation type="obsolete">Un fichier nommé: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;existe déjà. Voulez-vous écraser ce fichier?</translation>
    </message>
    <message>
        <source>QtiPlot - Export Error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;exportation</translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="1003"/>
        <source>enter your text here</source>
        <translation>Entrez votre texte ici</translation>
    </message>
    <message>
        <source>QtiPlot - Guess best layout?</source>
        <translation type="obsolete">QtiPlot - Arrangement automatique ?</translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="643"/>
        <location filename="../src/MultiLayer.cpp" line="704"/>
        <source>Please provide a valid file name!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="661"/>
        <source>File format not handled, operation aborted!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="289"/>
        <source>Do you want SciDAVis to rearrange the remaining layers?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="288"/>
        <source>Guess best layout?</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiLayer.cpp" line="643"/>
        <location filename="../src/MultiLayer.cpp" line="661"/>
        <location filename="../src/MultiLayer.cpp" line="703"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
</context>
<context>
    <name>MultiPeakFit</name>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="43"/>
        <source>MultiPeak</source>
        <translation>Multi-pics</translation>
    </message>
    <message>
        <source>Gauss</source>
        <translation type="obsolete">Gauss</translation>
    </message>
    <message>
        <source>Lorentz</source>
        <translation type="obsolete">Lorentz</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="78"/>
        <source>multi-peak</source>
        <translation>multi-pic</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="211"/>
        <location filename="../src/MultiPeakFit.cpp" line="214"/>
        <location filename="../src/MultiPeakFit.cpp" line="374"/>
        <source>Peak</source>
        <translation>Pic</translation>
    </message>
    <message>
        <source>QtiPlot - Fit Error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;ajustement</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="246"/>
        <source>Could not allocate enough memory for the fit curves!</source>
        <translation>Allocation mémoire impossible pour l&apos;ajustement des courbes !</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="282"/>
        <location filename="../src/MultiPeakFit.cpp" line="284"/>
        <location filename="../src/MultiPeakFit.cpp" line="299"/>
        <source>Fit</source>
        <translation>Ajuster</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="300"/>
        <source>fit of</source>
        <translation>Ajustement de</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="352"/>
        <source>peak</source>
        <translation>pic</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="374"/>
        <source>Area</source>
        <translation> Aire</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="375"/>
        <source>Center</source>
        <translation>Centre</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="375"/>
        <source>Width</source>
        <translation>Largeur</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="375"/>
        <source>Height</source>
        <translation>Hauteur</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="74"/>
        <source>Gauss Fit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="76"/>
        <source>Lorentz Fit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="117"/>
        <source>(amplitude)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="117"/>
        <source>(center)</source>
        <translation type="unfinished">(centre)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="117"/>
        <source>(width)</source>
        <translation type="unfinished">(largeur)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="117"/>
        <location filename="../src/MultiPeakFit.cpp" line="127"/>
        <source>(offset)</source>
        <translation type="unfinished">(décalage)</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="123"/>
        <source>(amplitude %1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="124"/>
        <source>(center %1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="125"/>
        <source>(width %1)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="246"/>
        <source>Fit Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="303"/>
        <source>1</source>
        <comment>multipeak fit table first column name</comment>
        <translation type="unfinished">1</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="305"/>
        <source>peak%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFit.cpp" line="306"/>
        <source>2</source>
        <comment>multipeak fit table last column name</comment>
        <translation type="unfinished">2</translation>
    </message>
</context>
<context>
    <name>MultiPeakFitTool</name>
    <message>
        <location filename="../src/MultiPeakFitTool.cpp" line="56"/>
        <source>Move cursor and click to select a point and double-click/press &apos;Enter&apos; to set the position of a peak!</source>
        <translation type="unfinished">Déplacer le curseur et cliquez poour sélectionner un point et double-qliquez (ou tapez &apos;Entrée&apos;) pour fixer la position d&apos;un Pic !</translation>
    </message>
    <message>
        <location filename="../src/MultiPeakFitTool.cpp" line="90"/>
        <source>Peak %1 selected! Click to select a point and double-click/press &apos;Enter&apos; to set the position of the next peak!</source>
        <translation type="unfinished">Pic %1 sélectionné ! Cliquez pour sélectionner un point et double-cliquez (ou pressez &apos;Entrée&apos;) pour fixer la position du prochain pic !</translation>
    </message>
</context>
<context>
    <name>MyWidget</name>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="82"/>
        <source>Do you want to hide or delete</source>
        <translation type="unfinished">Voulez-vous Cacher ou Supprimer</translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="83"/>
        <source>Delete</source>
        <translation type="unfinished">Supprimer</translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="83"/>
        <source>Hide</source>
        <translation type="unfinished">Cacher</translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="83"/>
        <source>Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="109"/>
        <source>Normal</source>
        <translation type="unfinished">Normal</translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="113"/>
        <source>Hidden</source>
        <translation type="unfinished">Caché</translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="120"/>
        <source>Minimized</source>
        <translation type="unfinished">Minimum</translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="124"/>
        <source>Maximized</source>
        <translation type="unfinished">Maximum</translation>
    </message>
    <message>
        <source>kB</source>
        <translation type="obsolete">kOctects</translation>
    </message>
    <message>
        <location filename="../src/MyWidget.cpp" line="81"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>NonLinearFit</name>
    <message>
        <location filename="../src/NonLinearFit.cpp" line="57"/>
        <source>NonLinear</source>
        <translation>Non-linéaire</translation>
    </message>
    <message>
        <location filename="../src/NonLinearFit.cpp" line="63"/>
        <source>Non-linear</source>
        <translation>Non-linéaire</translation>
    </message>
    <message>
        <source>QtiPlot - Input function error</source>
        <translation type="obsolete">QtiPlot - Erreur de la fonction d&apos;entrée</translation>
    </message>
    <message>
        <source>Please enter a valid non-empty expression! Operation aborted!</source>
        <translation type="obsolete">Veuillez entrer une expression valide no ive ! Opération annulée !</translation>
    </message>
    <message>
        <source>QtiPlot - Fit Error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;ajustement</translation>
    </message>
    <message>
        <source>There are no parameters specified for this fit operation. Please define a list of parameters first!</source>
        <translation type="obsolete">Aucun paramètre spécifié pour cette opération d&apos;ajustement. Veuillez d&apos;abord, définir une liste de paramètres !</translation>
    </message>
    <message>
        <source>You must provide a list containing at least 2 parameters for this type of fit. Operation aborted!</source>
        <translation type="obsolete">Vous devez fournir une liste contenant au moins 2 paramètres pour ce type d&apos;ajustement. Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/NonLinearFit.cpp" line="77"/>
        <source>You must provide a list containing at least one parameter for this type of fit. Operation aborted!</source>
        <translation>Vous devez fournir une liste contenant au moins 1 paramètre pour ce type d&apos;ajustement. Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/NonLinearFit.cpp" line="76"/>
        <source>Fit Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>OpenProjectDialog</name>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="43"/>
        <source>SciDAVis project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="44"/>
        <source>Compressed SciDAVis project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="45"/>
        <source>QtiPlot project</source>
        <translation type="unfinished">Projet QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="46"/>
        <source>Compressed QtiPlot project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="48"/>
        <source>Origin project</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="49"/>
        <source>Origin matrix</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="50"/>
        <source>Origin worksheet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="51"/>
        <source>Origin graph</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="54"/>
        <source>All files</source>
        <translation type="unfinished">Tous les fichiers</translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="60"/>
        <source>Open As</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="63"/>
        <source>New Project Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="64"/>
        <source>New Folder</source>
        <translation type="unfinished">Nouveau Dossier</translation>
    </message>
    <message>
        <location filename="../src/OpenProjectDialog.cpp" line="40"/>
        <source>Open Project</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PatternBox</name>
    <message>
        <location filename="../src/PatternBox.cpp" line="72"/>
        <source>Solid</source>
        <translation>plein</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="78"/>
        <source>Horizontal</source>
        <translation>Hachures =</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="84"/>
        <source>Vertical</source>
        <translation>Hachures ||</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="90"/>
        <source>Cross</source>
        <translation>Hachure #</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="96"/>
        <source>BDiagonal</source>
        <translation>Hachures //</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="102"/>
        <source>FDiagonal</source>
        <translation>Hachures \\</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="108"/>
        <source>DiagCross</source>
        <translation>Hachures X</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="114"/>
        <source>Dense1</source>
        <translation>Densité 1</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="120"/>
        <source>Dense2</source>
        <translation>Densité 2</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="126"/>
        <source>Dense3</source>
        <translation>Densité 3</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="132"/>
        <source>Dense4</source>
        <translation>Densité 4</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="138"/>
        <source>Dense5</source>
        <translation>Densité 5</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="144"/>
        <source>Dense6</source>
        <translation>Densité 6</translation>
    </message>
    <message>
        <location filename="../src/PatternBox.cpp" line="150"/>
        <source>Dense7</source>
        <translation>Densité 7</translation>
    </message>
</context>
<context>
    <name>PieDialog</name>
    <message>
        <source>QtiPlot - Pie Options</source>
        <translation type="obsolete">Qtiplot - Options pour les graphes à secteurs</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>Border</source>
        <translation type="obsolete">Bordure</translation>
    </message>
    <message>
        <source>First color</source>
        <translation type="obsolete">Première couleur</translation>
    </message>
    <message>
        <source>Pattern</source>
        <translation type="obsolete">Texture</translation>
    </message>
    <message>
        <source>Pie radius</source>
        <translation type="obsolete">Rayon du graphe à secteurs</translation>
    </message>
    <message>
        <source>Fill</source>
        <translation type="obsolete">Palette</translation>
    </message>
    <message>
        <source>Pie</source>
        <translation type="obsolete">Diagramme</translation>
    </message>
    <message>
        <source>Opacity</source>
        <translation type="obsolete">Opacité</translation>
    </message>
    <message>
        <source>Canvas Color</source>
        <translation type="obsolete">Couleur du cadre</translation>
    </message>
    <message>
        <source>Border Color</source>
        <translation type="obsolete">Couleur de la bordure</translation>
    </message>
    <message>
        <source>Margin</source>
        <translation type="obsolete">Marge</translation>
    </message>
    <message>
        <source>General</source>
        <translation type="obsolete">Général</translation>
    </message>
</context>
<context>
    <name>Plot</name>
    <message>
        <location filename="../src/Plot.cpp" line="58"/>
        <source>Y Axis Title</source>
        <translation>Axe Y</translation>
    </message>
    <message>
        <location filename="../src/Plot.cpp" line="59"/>
        <source>X Axis Title</source>
        <translation>Axe X</translation>
    </message>
</context>
<context>
    <name>Plot3DDialog</name>
    <message>
        <source>QtiPlot - Surface Plot Options</source>
        <translation type="obsolete">Qtiplot - Options pour les graphes 3D</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="65"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">&amp;Appliquer</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="67"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="70"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="94"/>
        <location filename="../src/Plot3DDialog.cpp" line="145"/>
        <source>X</source>
        <translation type="unfinished">X</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="95"/>
        <location filename="../src/Plot3DDialog.cpp" line="146"/>
        <source>Y</source>
        <translation type="unfinished">Y</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="96"/>
        <location filename="../src/Plot3DDialog.cpp" line="147"/>
        <source>Z</source>
        <translation type="unfinished">Z</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="101"/>
        <source>From</source>
        <translation type="unfinished">De</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="105"/>
        <source>To</source>
        <translation type="unfinished">à</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="109"/>
        <source>Type</source>
        <translation type="unfinished">Type</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="111"/>
        <source>linear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="112"/>
        <source>logarithmic</source>
        <translation type="unfinished">logarithmique</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="121"/>
        <source>Major Ticks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="124"/>
        <source>Minor Ticks</source>
        <translation type="unfinished">Graduations Secondaires</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="139"/>
        <source>&amp;Scale</source>
        <translation type="unfinished">&amp;Echelle</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="152"/>
        <source>Title</source>
        <translation type="unfinished">Titre</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="155"/>
        <source>Axis Font</source>
        <translation type="unfinished">Police</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="158"/>
        <source>&amp;Choose font</source>
        <translation type="unfinished">Modifiez</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="167"/>
        <source>Major Ticks Length</source>
        <translation type="unfinished">Longueur des graduations principales</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="170"/>
        <source>Minor Ticks Length</source>
        <translation type="unfinished">Longueur des graduations secondaires</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="184"/>
        <source>&amp;Axis</source>
        <translation type="unfinished">&amp;Axes</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="201"/>
        <source>&amp;Color</source>
        <translation type="unfinished">&amp;Couleur</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="203"/>
        <source>&amp;Font</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="215"/>
        <source>&amp;Title</source>
        <translation type="unfinished">&amp;Titre</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="226"/>
        <source>Ma&amp;x</source>
        <translation type="unfinished">Ma&amp;x</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="228"/>
        <source>&amp;Min</source>
        <translation type="unfinished">&amp;Min</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="230"/>
        <source>Color Ma&amp;p</source>
        <translation type="unfinished">Carte de couleurs</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="234"/>
        <source>Data</source>
        <translation type="unfinished">Données</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="238"/>
        <source>&amp;Line</source>
        <translation type="unfinished">&amp;Ligne</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="240"/>
        <source>&amp;Background</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="244"/>
        <source>General</source>
        <translation type="unfinished">Général</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="248"/>
        <source>&amp;Axes</source>
        <translation type="unfinished">&amp;Axes</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="250"/>
        <source>Lab&amp;els</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="252"/>
        <source>&amp;Numbers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="254"/>
        <source>&amp;Grid</source>
        <translation type="unfinished">&amp;Grille</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="258"/>
        <source>Coordinate System</source>
        <translation type="unfinished">Coordonnées système </translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="268"/>
        <source>Opacity</source>
        <translation type="unfinished">Opacité</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="280"/>
        <source>&amp;Colors</source>
        <translation type="unfinished">&amp;Couleurs</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="297"/>
        <source>Show Legend</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="299"/>
        <source>Orthogonal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="302"/>
        <location filename="../src/Plot3DDialog.cpp" line="413"/>
        <source>Line Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="307"/>
        <source>Resolution</source>
        <translation type="unfinished">Résolution</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="313"/>
        <source>Numbers Font</source>
        <translation type="unfinished">Police des nombres</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="314"/>
        <source>&amp;Choose Font</source>
        <translation type="unfinished">Modifiez</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="317"/>
        <source>Distance labels - axis</source>
        <translation type="unfinished">Distance étiquettes - axes</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="328"/>
        <source>Zoom (%)</source>
        <translation type="unfinished">Zoom (%)</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="335"/>
        <source>X Zoom (%)</source>
        <translation type="unfinished">Zoom en X (%)</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="342"/>
        <source>Y Zoom (%)</source>
        <translation type="unfinished">Zoom en Y (%)</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="349"/>
        <source>Z Zoom (%)</source>
        <translation type="unfinished">Zoom en Z (%)</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="366"/>
        <source>&amp;General</source>
        <translation type="unfinished">&amp;Général</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="384"/>
        <source>Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="386"/>
        <source>Dot</source>
        <translation type="unfinished">Point</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="387"/>
        <source>Cross Hair</source>
        <translation type="unfinished">Lignes croisées</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="388"/>
        <source>Cone</source>
        <translation type="unfinished">Cône</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="396"/>
        <location filename="../src/Plot3DDialog.cpp" line="430"/>
        <location filename="../src/Plot3DDialog.cpp" line="515"/>
        <source>Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="400"/>
        <source>Smooth angles</source>
        <translation type="unfinished">Angles arrondis</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="410"/>
        <source>Radius</source>
        <translation type="unfinished">Rayon</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="416"/>
        <source>Smooth line</source>
        <translation type="unfinished">Affinée</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="420"/>
        <source>Boxed</source>
        <translation type="unfinished">Boites 3D</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="433"/>
        <source>Quality</source>
        <translation type="unfinished">Qualité</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="450"/>
        <source>Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="520"/>
        <source>Bars</source>
        <translation type="unfinished">Barres</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="567"/>
        <source>Colormap files</source>
        <translation type="unfinished">Fichiers de cartes de couleurs</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="864"/>
        <source>Please enter scale limits that satisfy: from &lt; to!</source>
        <translation type="unfinished">Donnez des limites d&apos;échelle dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="56"/>
        <source>Surface Plot Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="842"/>
        <source>Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="855"/>
        <source>End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Plot3DDialog.cpp" line="863"/>
        <source>Input error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PlotDialog</name>
    <message>
        <source>QtiPlot - Custom curves</source>
        <translation type="obsolete">QtiPlot - Courbes définies par l&apos;utilisateur</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="128"/>
        <location filename="../src/PlotDialog.cpp" line="1150"/>
        <location filename="../src/PlotDialog.cpp" line="1608"/>
        <source>&amp;Plot Associations...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="89"/>
        <source>Plot type</source>
        <translation type="unfinished">Type de graphe</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="119"/>
        <source>&amp;Worksheet</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="126"/>
        <source>&amp;Apply</source>
        <translation type="unfinished">&amp;Appliquer</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="121"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="124"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="447"/>
        <source>Attach curve to: </source>
        <translation type="unfinished">Associé à la courbe à : </translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="449"/>
        <source>x Axis</source>
        <translation type="unfinished">Axe X</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="452"/>
        <location filename="../src/PlotDialog.cpp" line="819"/>
        <source>Bottom</source>
        <translation type="unfinished">Inférieur</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="453"/>
        <location filename="../src/PlotDialog.cpp" line="820"/>
        <source>Top</source>
        <translation type="unfinished">Supérieur</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="455"/>
        <source>y Axis</source>
        <translation type="unfinished">Axe Y</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="458"/>
        <location filename="../src/PlotDialog.cpp" line="817"/>
        <source>Left</source>
        <translation type="unfinished">Gauche</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="459"/>
        <location filename="../src/PlotDialog.cpp" line="818"/>
        <source>Right</source>
        <translation type="unfinished">Droite</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="466"/>
        <location filename="../src/PlotDialog.cpp" line="1337"/>
        <source>Axes</source>
        <translation type="unfinished">Axes</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="473"/>
        <source>Connect</source>
        <translation type="unfinished">Style</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="477"/>
        <source>No line</source>
        <translation type="unfinished">Aucune ligne</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="478"/>
        <source>Lines</source>
        <translation type="unfinished">Lignes</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="479"/>
        <source>Sticks</source>
        <translation type="unfinished">Batons</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="480"/>
        <source>Horizontal Steps</source>
        <translation type="unfinished">Marches horizontaux</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="481"/>
        <source>Dots</source>
        <translation type="unfinished">Points</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="482"/>
        <source>Spline</source>
        <translation type="unfinished">Interpolation</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="483"/>
        <source>Vertical Steps</source>
        <translation type="unfinished">Marches verticales</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="383"/>
        <location filename="../src/PlotDialog.cpp" line="486"/>
        <location filename="../src/PlotDialog.cpp" line="537"/>
        <location filename="../src/PlotDialog.cpp" line="797"/>
        <location filename="../src/PlotDialog.cpp" line="863"/>
        <source>Style</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="336"/>
        <location filename="../src/PlotDialog.cpp" line="392"/>
        <location filename="../src/PlotDialog.cpp" line="496"/>
        <location filename="../src/PlotDialog.cpp" line="793"/>
        <location filename="../src/PlotDialog.cpp" line="823"/>
        <source>Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="378"/>
        <location filename="../src/PlotDialog.cpp" line="502"/>
        <location filename="../src/PlotDialog.cpp" line="788"/>
        <location filename="../src/PlotDialog.cpp" line="865"/>
        <location filename="../src/PlotDialog.cpp" line="964"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="507"/>
        <source>Fill area under curve</source>
        <translation type="unfinished">Remplir l&apos;aire sous la courbe</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="510"/>
        <source>Fill color</source>
        <translation type="unfinished">Couleur de remplissage</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="406"/>
        <location filename="../src/PlotDialog.cpp" line="513"/>
        <location filename="../src/PlotDialog.cpp" line="1362"/>
        <location filename="../src/PlotDialog.cpp" line="1388"/>
        <source>Pattern</source>
        <translation type="unfinished">Texture</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="522"/>
        <location filename="../src/PlotDialog.cpp" line="1341"/>
        <location filename="../src/PlotDialog.cpp" line="1353"/>
        <location filename="../src/PlotDialog.cpp" line="1471"/>
        <source>Line</source>
        <translation type="unfinished">Lignes</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="540"/>
        <location filename="../src/PlotDialog.cpp" line="700"/>
        <source>Size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="545"/>
        <location filename="../src/PlotDialog.cpp" line="706"/>
        <source>Fill Color</source>
        <translation type="unfinished">Remplissage</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="549"/>
        <location filename="../src/PlotDialog.cpp" line="711"/>
        <source>Edge Color</source>
        <translation type="unfinished">Couleur du bord</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="552"/>
        <location filename="../src/PlotDialog.cpp" line="715"/>
        <source>Edge Width</source>
        <translation type="unfinished">Largeur du bord</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="562"/>
        <location filename="../src/PlotDialog.cpp" line="698"/>
        <location filename="../src/PlotDialog.cpp" line="1347"/>
        <location filename="../src/PlotDialog.cpp" line="1354"/>
        <source>Symbol</source>
        <translation type="unfinished">Symbole</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="572"/>
        <location filename="../src/PlotDialog.cpp" line="1466"/>
        <source>Box</source>
        <translation type="unfinished">Boîte</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="574"/>
        <location filename="../src/PlotDialog.cpp" line="674"/>
        <source>Type</source>
        <translation type="unfinished">Type</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="578"/>
        <source>No Box</source>
        <translation type="unfinished">Aucune boîte</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="579"/>
        <source>Rectangle</source>
        <translation type="unfinished">Rectangle</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="580"/>
        <source>Diamond</source>
        <translation type="unfinished">Diamant</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="581"/>
        <source>Perc 10, 25, 75, 90</source>
        <translation type="unfinished">10, 25, 75, 90 %</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="582"/>
        <source>Notch</source>
        <translation type="unfinished">Réjecteur</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="585"/>
        <location filename="../src/PlotDialog.cpp" line="622"/>
        <source>Range</source>
        <translation type="unfinished">Gamme</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="589"/>
        <location filename="../src/PlotDialog.cpp" line="628"/>
        <location filename="../src/PlotDialog.cpp" line="1113"/>
        <source>Standard Deviation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="590"/>
        <location filename="../src/PlotDialog.cpp" line="629"/>
        <source>Standard Error</source>
        <translation type="unfinished">Erreur type</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="591"/>
        <source>Perc 25, 75</source>
        <translation type="unfinished">25, 75 %</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="592"/>
        <source>Perc 10, 90</source>
        <translation type="unfinished">10, 90 %</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="593"/>
        <source>Perc 5, 95</source>
        <translation type="unfinished">5, 95 %</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="594"/>
        <source>Perc 1, 99</source>
        <translation type="unfinished">1, 99 %</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="595"/>
        <location filename="../src/PlotDialog.cpp" line="634"/>
        <source>Max-Min</source>
        <translation type="unfinished">Max-Min</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="596"/>
        <location filename="../src/PlotDialog.cpp" line="635"/>
        <source>Constant</source>
        <translation type="unfinished">Constante</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="599"/>
        <location filename="../src/PlotDialog.cpp" line="638"/>
        <source>Percentile (%)</source>
        <translation type="unfinished">Pourcentage (%)</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="606"/>
        <source>Coefficient</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="614"/>
        <source>Box Width</source>
        <translation type="unfinished">Largeur de boîte</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="620"/>
        <source>Whiskers</source>
        <translation type="unfinished">Whiskers</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="627"/>
        <source>No Whiskers</source>
        <translation type="unfinished">Sans Whiskers</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="630"/>
        <source>75-25</source>
        <translation type="unfinished">75-25</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="631"/>
        <source>90-10</source>
        <translation type="unfinished">90-10</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="632"/>
        <source>95-5</source>
        <translation type="unfinished">95-5</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="633"/>
        <source>99-1</source>
        <translation type="unfinished">99-1</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="645"/>
        <source>Coef</source>
        <translation type="unfinished">Coefficient</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="665"/>
        <location filename="../src/PlotDialog.cpp" line="1389"/>
        <source>Box/Whiskers</source>
        <translation type="unfinished">Boîte / Whiskers</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="676"/>
        <source>Max</source>
        <translation type="unfinished">Max</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="681"/>
        <source>99%</source>
        <translation type="unfinished">99 %</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="685"/>
        <location filename="../src/PlotDialog.cpp" line="1112"/>
        <source>Mean</source>
        <translation type="unfinished">Moyenne</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="689"/>
        <source>1%</source>
        <translation type="unfinished">1 %</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="693"/>
        <source>Min</source>
        <translation type="unfinished">Min</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="725"/>
        <location filename="../src/PlotDialog.cpp" line="1390"/>
        <source>Percentile</source>
        <translation type="unfinished">Pourcentage</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="742"/>
        <location filename="../src/PlotDialog.cpp" line="834"/>
        <location filename="../src/PlotDialog.cpp" line="1468"/>
        <source>Image</source>
        <translation type="unfinished">Image</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="746"/>
        <source>&amp;Gray Scale</source>
        <translation type="unfinished">Échelle de &amp;gris</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="749"/>
        <source>&amp;Default Color Map</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="752"/>
        <source>&amp;Custom Color Map</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="761"/>
        <source>Contour Lines</source>
        <translation type="unfinished">Lignes du contour</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="765"/>
        <source>Levels</source>
        <translation type="unfinished">Niveaux</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="775"/>
        <source>Use &amp;Color Map</source>
        <translation type="unfinished">Utiliser la &amp;carte des couleurs</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="779"/>
        <source>Use Default &amp;Pen</source>
        <translation type="unfinished">Utiliser la crayon par défault</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="810"/>
        <source>Color Bar Scale</source>
        <translation type="unfinished">Échelle des barres de couleurs</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="814"/>
        <source>Axis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="834"/>
        <location filename="../src/PlotDialog.cpp" line="1395"/>
        <location filename="../src/PlotDialog.cpp" line="1468"/>
        <source>Contour</source>
        <translation type="unfinished">Contour</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="851"/>
        <source>Direction</source>
        <translation type="unfinished">Direction</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="854"/>
        <source>Plus</source>
        <translation type="unfinished">Plus</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="856"/>
        <source>Minus</source>
        <translation type="unfinished">Moins</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="858"/>
        <source>&amp;X Error Bar</source>
        <translation type="unfinished">Barres d&apos;erreur en abscisses</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="870"/>
        <location filename="../src/PlotDialog.cpp" line="967"/>
        <source>Line Width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="872"/>
        <source>1</source>
        <translation type="unfinished">1</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="873"/>
        <source>2</source>
        <translation type="unfinished">2</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="874"/>
        <source>3</source>
        <translation type="unfinished">3</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="875"/>
        <source>4</source>
        <translation type="unfinished">4</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="876"/>
        <source>5</source>
        <translation type="unfinished">5</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="880"/>
        <source>Cap Width</source>
        <translation type="unfinished">Largeur ???</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="882"/>
        <source>8</source>
        <translation type="unfinished">8</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="883"/>
        <source>10</source>
        <translation type="unfinished">10</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="884"/>
        <source>12</source>
        <translation type="unfinished">12</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="885"/>
        <source>16</source>
        <translation type="unfinished">16</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="886"/>
        <source>20</source>
        <translation type="unfinished">20</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="890"/>
        <source>Through Symbol</source>
        <translation type="unfinished">A travers le symbole</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="898"/>
        <location filename="../src/PlotDialog.cpp" line="1382"/>
        <location filename="../src/PlotDialog.cpp" line="1449"/>
        <source>Error Bars</source>
        <translation type="unfinished">Barres d&apos;erreurs</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="910"/>
        <source>Automatic Binning</source>
        <translation type="unfinished">Échantillonage automatique</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="913"/>
        <source>&amp;Show statistics</source>
        <translation type="unfinished">Afficher les &amp;Statistiques</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="918"/>
        <source>Bin Size</source>
        <translation type="unfinished">Période d&apos;échantillonnage</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="921"/>
        <source>Begin</source>
        <translation type="unfinished">Début</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="924"/>
        <source>End</source>
        <translation type="unfinished">Fin</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="934"/>
        <location filename="../src/PlotDialog.cpp" line="1367"/>
        <source>Histogram Data</source>
        <translation type="unfinished">Données de l&apos;Histogramme</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="945"/>
        <source>Gap Between Bars (in %)</source>
        <translation type="unfinished">Ecart entre les barres (en %)</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="950"/>
        <source>Offset (in %)</source>
        <translation type="unfinished">Décalage (en %)</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="957"/>
        <location filename="../src/PlotDialog.cpp" line="1363"/>
        <source>Spacing</source>
        <translation type="unfinished">Espacement</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="972"/>
        <source>Arrowheads</source>
        <translation type="unfinished">Têtes des flêches</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="974"/>
        <source>Length</source>
        <translation type="unfinished">Longueur</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="978"/>
        <location filename="../src/PlotDialog.cpp" line="2233"/>
        <source>Angle</source>
        <translation type="unfinished">Angle</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="983"/>
        <source>&amp;Filled</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="987"/>
        <location filename="../src/PlotDialog.cpp" line="2240"/>
        <source>End Point</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="989"/>
        <location filename="../src/PlotDialog.cpp" line="2241"/>
        <source>X End</source>
        <translation type="unfinished">Fin en X</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="994"/>
        <location filename="../src/PlotDialog.cpp" line="2242"/>
        <source>Y End</source>
        <translation type="unfinished">Fin en Y</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="999"/>
        <source>Position</source>
        <translation type="unfinished">Position</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1002"/>
        <source>Tail</source>
        <translation type="unfinished">Queue</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1003"/>
        <source>Middle</source>
        <translation type="unfinished">Milieu</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1004"/>
        <source>Head</source>
        <translation type="unfinished">Tête</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1018"/>
        <location filename="../src/PlotDialog.cpp" line="1376"/>
        <source>Vector</source>
        <translation type="unfinished">Vecteur</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1089"/>
        <location filename="../src/PlotDialog.cpp" line="1106"/>
        <location filename="../src/PlotDialog.cpp" line="1116"/>
        <source>Bins</source>
        <translation type="unfinished">Echantillons</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1090"/>
        <location filename="../src/PlotDialog.cpp" line="1111"/>
        <source>Histogram and Probabilities for</source>
        <translation type="unfinished">Histogramme et Probalités pour </translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1106"/>
        <source>Quantity</source>
        <translation type="unfinished">Quantité</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1106"/>
        <source>Sum</source>
        <translation type="unfinished">Somme</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1106"/>
        <source>Percent</source>
        <translation type="unfinished">Pourcentage</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1114"/>
        <source>Minimum</source>
        <translation type="unfinished">Minimum</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1115"/>
        <source>Maximum</source>
        <translation type="unfinished">Maximum</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1143"/>
        <source>&amp;Delete</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1148"/>
        <location filename="../src/PlotDialog.cpp" line="1606"/>
        <source>&amp;Edit...</source>
        <translation type="unfinished">&amp;Edition...</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1395"/>
        <source>Colors</source>
        <translation type="unfinished">Couleurs</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1453"/>
        <source>Vertical Bars</source>
        <translation type="unfinished">Barres Verticales</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1455"/>
        <source>Horizontal Bars</source>
        <translation type="unfinished">Barres Horizontales</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1457"/>
        <source>Histogram</source>
        <translation type="unfinished">Histogramme</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1460"/>
        <source>Vector XYXY</source>
        <translation type="unfinished">Vecteurs XYXY</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1461"/>
        <source>Vector XYAM</source>
        <translation type="unfinished">Vecteur XYAM</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1472"/>
        <source>Scatter</source>
        <translation type="unfinished">Nuage de Points</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="1473"/>
        <source>Line + Symbol</source>
        <translation type="unfinished">Lignes + Symboles</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2020"/>
        <source>Please enter a valid start limit!</source>
        <translation type="unfinished">Donnez une valeur  de départ correcte !</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2027"/>
        <source>Please enter a valid end limit!</source>
        <translation type="unfinished">Donnez une valeur d&apos;arrêt correcte !</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2034"/>
        <source>Please enter a valid bin size value!</source>
        <translation type="unfinished">Donnez une taille d&apos;échantillonnage valide !</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2093"/>
        <source>Please enter limits that satisfy: begin &lt; end!</source>
        <translation type="unfinished">Veuillez entrer un domaine pour les abscisses tel que le début soit inférieur à la fin !</translation>
    </message>
    <message>
        <source>QtiPlot - Bin size input error</source>
        <translation type="obsolete">QtiPlot - Erreur de la taille des échantillons</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2119"/>
        <source>Please enter a positive bin size value!</source>
        <translation type="unfinished">Donnez une valeur positive de la taille des échantillons !</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2232"/>
        <source>Vector Data</source>
        <translation type="unfinished">Vecteur Donnée</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2234"/>
        <source>Magnitude</source>
        <translation type="unfinished">Amplitude</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="280"/>
        <source>Titles</source>
        <translation type="unfinished">Titres</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="281"/>
        <source>Axes Labels</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="282"/>
        <source>Axes Numbers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="283"/>
        <source>Legends</source>
        <translation type="unfinished">Légendes</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="295"/>
        <location filename="../src/PlotDialog.cpp" line="1317"/>
        <source>Fonts</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="310"/>
        <source>Background Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="313"/>
        <location filename="../src/PlotDialog.cpp" line="324"/>
        <source>Opacity</source>
        <translation type="unfinished">Opacité</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="318"/>
        <location filename="../src/PlotDialog.cpp" line="329"/>
        <source>Transparent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="321"/>
        <source>Canvas Color</source>
        <translation type="unfinished">Couleur du cadre</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="332"/>
        <source>Border Color</source>
        <translation type="unfinished">Couleur de la bordure</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="344"/>
        <source>Margin</source>
        <translation type="unfinished">Marge</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="350"/>
        <source>Antialiasing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="353"/>
        <source>Apply to all layers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="361"/>
        <location filename="../src/PlotDialog.cpp" line="1042"/>
        <location filename="../src/PlotDialog.cpp" line="1308"/>
        <source>Layer</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="397"/>
        <source>Border</source>
        <translation type="unfinished">Bordure</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="401"/>
        <source>First color</source>
        <translation type="unfinished">Première couleur</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="409"/>
        <source>Pie radius</source>
        <translation type="unfinished">Rayon du graphe à secteurs</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="418"/>
        <source>Fill</source>
        <translation type="unfinished">Palette</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="426"/>
        <location filename="../src/PlotDialog.cpp" line="1331"/>
        <location filename="../src/PlotDialog.cpp" line="1451"/>
        <source>Pie</source>
        <translation type="unfinished">Diagramme</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="433"/>
        <source>&amp;Scale layers to paper size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="442"/>
        <location filename="../src/PlotDialog.cpp" line="1316"/>
        <source>Print</source>
        <translation type="unfinished">Imprimer</translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="73"/>
        <source>Plot details</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2020"/>
        <location filename="../src/PlotDialog.cpp" line="2027"/>
        <location filename="../src/PlotDialog.cpp" line="2034"/>
        <location filename="../src/PlotDialog.cpp" line="2093"/>
        <source>Input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2063"/>
        <source>Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2082"/>
        <source>End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="2108"/>
        <location filename="../src/PlotDialog.cpp" line="2119"/>
        <source>Bin size input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotDialog.cpp" line="435"/>
        <source>Print Crop &amp;Marks</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PlotWizard</name>
    <message>
        <source>QtiPlot - Select Columns to Plot</source>
        <translation type="obsolete">Qtiplot - Sélectionnez les colonnes à tracer</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="57"/>
        <source>&amp;X</source>
        <translation type="unfinished">&amp;X</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="61"/>
        <source>x&amp;Err</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="65"/>
        <source>&amp;Y</source>
        <translation type="unfinished">&amp;Y</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="69"/>
        <source>yE&amp;rr</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="73"/>
        <source>&amp;Z</source>
        <translation type="unfinished">&amp;Z</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="79"/>
        <source>&amp;New curve</source>
        <translation type="unfinished">&amp;Nouvelle courbe</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="84"/>
        <source>&amp;Delete curve</source>
        <translation type="unfinished">Supprimer une courbe</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="94"/>
        <source>Worksheet</source>
        <translation type="unfinished">Feuille de travail</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="108"/>
        <source>&amp;Plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="112"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="148"/>
        <source>Please define a Y column for the following curve</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="208"/>
        <source>You have already defined a X column!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="222"/>
        <location filename="../src/PlotWizard.cpp" line="240"/>
        <location filename="../src/PlotWizard.cpp" line="258"/>
        <location filename="../src/PlotWizard.cpp" line="278"/>
        <source>You must define a X column first!</source>
        <translation type="unfinished">Vous devez définir une colonne pour les X !</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="224"/>
        <source>You have already defined a Y column!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>This kind of curve is not handled by QtiPlot!</source>
        <translation type="obsolete">Ce type de courbe n&apos;est pas géré par Qtiplot !</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="242"/>
        <source>You have already defined a Z column!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="260"/>
        <location filename="../src/PlotWizard.cpp" line="280"/>
        <source>You must define a Y column first!</source>
        <translation type="unfinished">Vous devez définir une colonne pour les Y !</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="262"/>
        <location filename="../src/PlotWizard.cpp" line="282"/>
        <source>You have already defined an error-bars column!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="321"/>
        <source>You must add a new curve first!</source>
        <translation type="unfinished">Vous devez d&apos;abord définir une nouvelle courbe !</translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="238"/>
        <location filename="../src/PlotWizard.cpp" line="256"/>
        <location filename="../src/PlotWizard.cpp" line="276"/>
        <source>This kind of curve is not handled by SciDAVis!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="49"/>
        <source>Select Columns to Plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PlotWizard.cpp" line="147"/>
        <location filename="../src/PlotWizard.cpp" line="208"/>
        <location filename="../src/PlotWizard.cpp" line="222"/>
        <location filename="../src/PlotWizard.cpp" line="224"/>
        <location filename="../src/PlotWizard.cpp" line="238"/>
        <location filename="../src/PlotWizard.cpp" line="240"/>
        <location filename="../src/PlotWizard.cpp" line="242"/>
        <location filename="../src/PlotWizard.cpp" line="256"/>
        <location filename="../src/PlotWizard.cpp" line="258"/>
        <location filename="../src/PlotWizard.cpp" line="260"/>
        <location filename="../src/PlotWizard.cpp" line="262"/>
        <location filename="../src/PlotWizard.cpp" line="276"/>
        <location filename="../src/PlotWizard.cpp" line="278"/>
        <location filename="../src/PlotWizard.cpp" line="280"/>
        <location filename="../src/PlotWizard.cpp" line="282"/>
        <location filename="../src/PlotWizard.cpp" line="321"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
</context>
<context>
    <name>PluginFit</name>
    <message>
        <source>Plugin</source>
        <translation type="obsolete">Extension</translation>
    </message>
    <message>
        <source>QtiPlot - File not found</source>
        <translation type="obsolete">QtiPlot - Fichier non trouvé</translation>
    </message>
    <message>
        <location filename="../src/PluginFit.cpp" line="64"/>
        <source>Plugin file: &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt; &lt;p&gt;not found. Operation aborted!</source>
        <translation>Le ficher d&apos;extension : &lt;p&gt;&lt;b&gt; %1 &lt;/b&gt; &lt;p&gt; n&apos;existe pas. Opération annulée !</translation>
    </message>
    <message>
        <source>QtiPlot - Plugin Error</source>
        <translation type="obsolete">QtiPlot - Erreur de l&apos;extension</translation>
    </message>
    <message>
        <location filename="../src/PluginFit.cpp" line="76"/>
        <source>The plugin does not implement a %1 method necessary for simplex fitting.</source>
        <translation>L&apos;extension ne comporte pas la méthode %1 nécessaire à l&apos;ajustement simplex.</translation>
    </message>
    <message>
        <location filename="../src/PluginFit.cpp" line="84"/>
        <location filename="../src/PluginFit.cpp" line="92"/>
        <location filename="../src/PluginFit.cpp" line="100"/>
        <source>The plugin does not implement a %1 method necessary for Levenberg-Marquardt fitting.</source>
        <translation>L&apos;extension ne comporte pas la méthode %1 nécessaire à l&apos;ajustement Levenberg-Marquardt.</translation>
    </message>
    <message>
        <location filename="../src/PluginFit.cpp" line="56"/>
        <source>Plugin Fit</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PluginFit.cpp" line="63"/>
        <source>File not found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PluginFit.cpp" line="75"/>
        <location filename="../src/PluginFit.cpp" line="83"/>
        <location filename="../src/PluginFit.cpp" line="91"/>
        <location filename="../src/PluginFit.cpp" line="99"/>
        <source>Plugin Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PolynomFitDialog</name>
    <message>
        <source>QtiPlot - Polynomial Fit Options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;ajustement polynomial</translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="53"/>
        <source>Polynomial Fit of</source>
        <translation type="unfinished">Ajustement de</translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="58"/>
        <source>Order (1 - 9, 1 = linear)</source>
        <translation type="unfinished">Ordre (1 - 9, 1 = linéaire)</translation>
    </message>
    <message>
        <source>Fit curve # pts</source>
        <translation type="obsolete">Points</translation>
    </message>
    <message>
        <source>Not enough points</source>
        <translation type="obsolete">Nombre de points insuffisants</translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="64"/>
        <source>Fit curve Xmin</source>
        <translation type="unfinished">Xmin = </translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="65"/>
        <source>0</source>
        <translation type="unfinished">0</translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="68"/>
        <source>Fit curve Xmax</source>
        <translation type="unfinished">Xmax = </translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="72"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="77"/>
        <source>Show Formula on Graph?</source>
        <translation type="unfinished">Afficher la formule ?</translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="82"/>
        <source>&amp;Fit</source>
        <translation type="unfinished">&amp;Calculer</translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="85"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="110"/>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="unfinished">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="48"/>
        <source>Polynomial Fit Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/PolynomFitDialog.cpp" line="109"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>PolynomialFit</name>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="59"/>
        <source>Poly</source>
        <translation>Poly</translation>
    </message>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="61"/>
        <source>Polynomial</source>
        <translation>Polynomial</translation>
    </message>
    <message>
        <source>QtiPlot - Fit Error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;ajustement</translation>
    </message>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="138"/>
        <source>You need at least %1 data points for this fit operation. Operation aborted!</source>
        <translation>Il faut au moins %1 points pour réaliser cette opération ! Opération annulée !</translation>
    </message>
    <message>
        <location filename="../src/PolynomialFit.cpp" line="137"/>
        <source>Fit Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Project</name>
    <message>
        <location filename="../src/future/core/Project.cpp" line="76"/>
        <source>Unnamed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/Project.cpp" line="194"/>
        <source>invalid or missing project version</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/Project.cpp" line="217"/>
        <source>unknown element &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/Project.cpp" line="224"/>
        <source>no scidavis_project element found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/Project.cpp" line="227"/>
        <source>no valid XML document found</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ProjectConfigPage</name>
    <message>
        <location filename="../src/future/core/ProjectConfigPage.ui" line="13"/>
        <source>Form</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/ProjectConfigPage.ui" line="21"/>
        <source>By default, show the subwindows ...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/ProjectConfigPage.ui" line="41"/>
        <source>in the current folder</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/ProjectConfigPage.ui" line="46"/>
        <source>in the current folder and its subfolders</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/ProjectConfigPage.ui" line="51"/>
        <source>all subwindows in the project</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>QObject</name>
    <message>
        <location filename="../src/future/core/AbstractAspect.cpp" line="300"/>
        <source>&amp;Remove</source>
        <translation type="unfinished">Supprimer</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="120"/>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="38"/>
        <location filename="../src/future/table/future_Table.cpp" line="175"/>
        <location filename="../src/future/table/tablecommands.cpp" line="44"/>
        <source>%1: insert %2 column(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="130"/>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="90"/>
        <location filename="../src/future/table/future_Table.cpp" line="188"/>
        <location filename="../src/future/table/tablecommands.cpp" line="101"/>
        <source>%1: remove %2 column(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="244"/>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="140"/>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="125"/>
        <location filename="../src/future/table/future_Table.cpp" line="208"/>
        <source>%1: remove %2 row(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="216"/>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="150"/>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="64"/>
        <location filename="../src/future/table/future_Table.cpp" line="222"/>
        <source>%1: insert %2 row(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="160"/>
        <source>%1: set matrix size to %2x%3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="188"/>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="160"/>
        <location filename="../src/future/table/future_Table.cpp" line="302"/>
        <source>%1: clear</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="328"/>
        <location filename="../src/future/table/future_Table.cpp" line="674"/>
        <source>%1: insert empty column(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="352"/>
        <location filename="../src/future/table/future_Table.cpp" line="701"/>
        <source>%1: remove selected column(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="363"/>
        <location filename="../src/future/table/future_Table.cpp" line="715"/>
        <source>%1: clear selected column(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="381"/>
        <location filename="../src/future/table/future_Table.cpp" line="876"/>
        <source>%1: insert empty rows(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="405"/>
        <location filename="../src/future/table/future_Table.cpp" line="897"/>
        <source>%1: remove selected rows(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="420"/>
        <source>%1: clear selected rows(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="962"/>
        <location filename="../src/future/table/future_Table.cpp" line="951"/>
        <source>%1: add %2 rows(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="973"/>
        <location filename="../src/future/table/future_Table.cpp" line="337"/>
        <source>%1: add %2 column(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="195"/>
        <source>%1: clear column %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="225"/>
        <source>%1: set cell value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="252"/>
        <source>%1: set matrix coordinates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/datatypes/Double2StringFilter.cpp" line="78"/>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="289"/>
        <source>%1: set numeric format to &apos;%2&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/datatypes/Double2StringFilter.cpp" line="100"/>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="314"/>
        <source>%1: set decimal digits to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="339"/>
        <source>%1: set formula</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ApplicationWindow.cpp" line="11802"/>
        <location filename="../src/globals.cpp" line="137"/>
        <source>Released</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/AbstractFilter.cpp" line="121"/>
        <source>In%1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/Project.cpp" line="154"/>
        <source>General</source>
        <translation type="unfinished">Général</translation>
    </message>
    <message>
        <location filename="../src/future/core/aspectcommands.h" line="40"/>
        <source>%1: rename to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/aspectcommands.h" line="61"/>
        <source>%1: change comment</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/aspectcommands.h" line="82"/>
        <source>%1: change caption</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/aspectcommands.h" line="104"/>
        <source>%1: set creation time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/aspectcommands.h" line="126"/>
        <source>%1: remove %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/aspectcommands.h" line="158"/>
        <source>%1: add %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/aspectcommands.h" line="172"/>
        <source>%1: move child from position %2 to %3.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/aspectcommands.h" line="201"/>
        <source>%1: move %2 to %3.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/Column.cpp" line="93"/>
        <location filename="../src/future/core/column/columncommands.cpp" line="40"/>
        <location filename="../src/future/table/TableView.cpp" line="632"/>
        <location filename="../src/future/table/TableView.cpp" line="649"/>
        <source>%1: change column type</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="124"/>
        <location filename="../src/future/core/column/columncommands.cpp" line="171"/>
        <source>%1: change cell value(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="293"/>
        <source>%1: set plot designation</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="321"/>
        <source>%1: clear column</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="388"/>
        <source>%1: mark all cells valid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="421"/>
        <source>%1: clear masks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="455"/>
        <source>%1: mark cells invalid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="457"/>
        <source>%1: mark cells valid</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="491"/>
        <source>%1: mask cells</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="493"/>
        <source>%1: unmask cells</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="526"/>
        <source>%1: set cell formula</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="559"/>
        <source>%1: clear all formulas</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="592"/>
        <source>%1: set text for row %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="624"/>
        <location filename="../src/future/core/column/columncommands.cpp" line="656"/>
        <source>%1: set value for row %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="688"/>
        <source>%1: replace the texts for rows %2 to %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/column/columncommands.cpp" line="725"/>
        <location filename="../src/future/core/column/columncommands.cpp" line="762"/>
        <source>%1: replace the values for rows %2 to %3</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/datatypes/DateTime2StringFilter.cpp" line="44"/>
        <location filename="../src/future/core/datatypes/String2DateTimeFilter.cpp" line="139"/>
        <source>%1: set date-time format to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/datatypes/DateTime2StringFilter.cpp" line="46"/>
        <location filename="../src/future/core/datatypes/String2DateTimeFilter.cpp" line="141"/>
        <source>set date-time format to %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/datatypes/Double2StringFilter.cpp" line="80"/>
        <source>set numeric format to &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/datatypes/Double2StringFilter.cpp" line="102"/>
        <source>set decimal digits to %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="64"/>
        <source>XML reader error: </source>
        <comment>prefix for XML error messages</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="65"/>
        <source> (loading failed)</source>
        <comment>postfix for XML error messages</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="66"/>
        <source>XML reader warning: </source>
        <comment>prefix for XML warning messages</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="82"/>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="88"/>
        <source>line %1, column %2: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="96"/>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="104"/>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="126"/>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="136"/>
        <source>unexpected end of document</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="829"/>
        <location filename="../src/future/table/future_Table.cpp" line="1608"/>
        <source>%1: copy %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="366"/>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="396"/>
        <source>%1: set cell values</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="424"/>
        <source>%1: transpose</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="470"/>
        <source>%1: mirror horizontally</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/matrixcommands.cpp" line="507"/>
        <source>%1: mirror vertically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/AsciiTableImportFilter.h" line="67"/>
        <source>ASCII table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="235"/>
        <location filename="../src/future/table/tablecommands.cpp" line="73"/>
        <source>%1: set the number of rows to %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="314"/>
        <source>%1: clear all masks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="326"/>
        <source>%1: add column</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="737"/>
        <source>%1: set plot designation(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="782"/>
        <source>%1: normalize column(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="814"/>
        <source>%1: normalize selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/tablecommands.cpp" line="128"/>
        <source>%1: move column %2 from position %3 to %4</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/globals.cpp" line="135"/>
        <source>About SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/lib/XmlStreamReader.cpp" line="67"/>
        <source></source>
        <comment>postfix for XML warning messages</comment>
        <translation></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="912"/>
        <source>%1: clear selected cell(s)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RangeSelectorTool</name>
    <message>
        <location filename="../src/RangeSelectorTool.cpp" line="56"/>
        <source>All the curves on this plot are empty!</source>
        <translation type="unfinished">Toutes les courbes de ce graphe sont vides !</translation>
    </message>
    <message>
        <location filename="../src/RangeSelectorTool.cpp" line="92"/>
        <source>Click or use Ctrl+arrow key to select range (arrows select active cursor)!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/RangeSelectorTool.cpp" line="176"/>
        <location filename="../src/RangeSelectorTool.cpp" line="191"/>
        <source>Right</source>
        <translation type="unfinished">Droite</translation>
    </message>
    <message>
        <location filename="../src/RangeSelectorTool.cpp" line="176"/>
        <location filename="../src/RangeSelectorTool.cpp" line="191"/>
        <source>Left</source>
        <translation type="unfinished">Gauche</translation>
    </message>
    <message>
        <location filename="../src/RangeSelectorTool.cpp" line="55"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>RenameWindowDialog</name>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="52"/>
        <source>Window Title</source>
        <translation type="unfinished">Titre de la fenêtre</translation>
    </message>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="55"/>
        <source>&amp;Name (single word)</source>
        <translation type="unfinished">&amp;Nom (un seul mot)</translation>
    </message>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="61"/>
        <source>&amp;Label</source>
        <translation type="unfinished">&amp;Etiquette</translation>
    </message>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="68"/>
        <source>&amp;Both Name and Label</source>
        <translation type="unfinished">Nom et Etiquette</translation>
    </message>
    <message>
        <source>QtiPlot - Rename Window</source>
        <translation type="obsolete">Qtiplot - Renommer la Fenêtre</translation>
    </message>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="76"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="81"/>
        <source>&amp;Cancel</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="143"/>
        <source>For internal consistency reasons the underscore character is replaced with a minus sign.</source>
        <translation type="unfinished">Pour des raisons d&apos;uniformité, le trait souligné (_) est remplacé par le signe moins (-).</translation>
    </message>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="47"/>
        <source>Rename Window</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/RenameWindowDialog.cpp" line="142"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SciDAVisAbout</name>
    <message>
        <location filename="../src/SciDAVisAbout.ui" line="25"/>
        <source>Dialog</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SciDAVisAbout.ui" line="49"/>
        <source>SciDAVis XX.XX.XX-betaXX</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SciDAVisAbout.ui" line="67"/>
        <source>Released XXXX-XX-XX</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SciDAVisAbout.ui" line="130"/>
        <source>Close</source>
        <translation type="unfinished">Fermer</translation>
    </message>
</context>
<context>
    <name>ScreenPickerTool</name>
    <message>
        <location filename="../src/ScreenPickerTool.cpp" line="49"/>
        <source>Click on plot or move cursor to display coordinates!</source>
        <translation type="unfinished">Cliquez sur le graphe ou déplacez le curseur pour afficher les coordonnées !</translation>
    </message>
</context>
<context>
    <name>ScriptEdit</name>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="125"/>
        <source>Auto&amp;exec</source>
        <translation>Auto&amp;execution</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="159"/>
        <source>&amp;Functions</source>
        <translation>&amp;Fonctions</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="318"/>
        <location filename="../src/ScriptEdit.cpp" line="343"/>
        <source>Text</source>
        <translation>Texte</translation>
    </message>
    <message>
        <source>Python Source</source>
        <translation type="obsolete">Source Python</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="320"/>
        <location filename="../src/ScriptEdit.cpp" line="345"/>
        <source>All Files</source>
        <translation>Tous les fichiers</translation>
    </message>
    <message>
        <source>QtiPlot - Import Text From File</source>
        <translation type="obsolete">QtiPlot - Importer du texte à partir d&apos;un fichier</translation>
    </message>
    <message>
        <source>QtiPlot - Error Opening File</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;ouverture du fichier</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="330"/>
        <source>Could not open file &quot;%1&quot; for reading.</source>
        <translation>Imposssible d&apos;ouvrir le fichier &quot;%1&quot; en lecture.</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="351"/>
        <source>Save Text to File</source>
        <translation>Sauvegarde du texte en fichier</translation>
    </message>
    <message>
        <source>QtiPlot -- Overwrite File? </source>
        <translation type="obsolete">QtiPlot -- Ecraser le fichier? </translation>
    </message>
    <message>
        <source>A file called: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;already exists.
Do you want to overwrite it?</source>
        <translation type="obsolete">Un fichier nommé : &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;existe déjà. Voulez-vous l&apos;écraser ?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="obsolete">&amp;Oui</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;Non</translation>
    </message>
    <message>
        <source>QtiPlot - File Save Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de la sauvegarde du fichier</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="368"/>
        <source>Could not write to file: &lt;br&gt;&lt;h4&gt; %1 &lt;/h4&gt;&lt;p&gt;Please verify that you have the right to write to this location!</source>
        <translation>Impossible d&apos;enregistrer le fichier &lt;br&gt;&lt;h4&gt; %1 &lt;/h4&gt;&lt;p&gt;. Vérifiez que vous avez les droits requis pour écrire à cet emplacement !</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="61"/>
        <source>E&amp;xecute</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="62"/>
        <source>Ctrl+J</source>
        <translation type="unfinished">Ctrl+J</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="65"/>
        <source>Execute &amp;All</source>
        <translation type="unfinished">Tout exécuter</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="66"/>
        <source>Ctrl+Shift+J</source>
        <translation type="unfinished">Ctrl+Shift+J</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="69"/>
        <source>&amp;Evaluate Expression</source>
        <translation type="unfinished">Evaluer l&apos;expression</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="70"/>
        <source>Ctrl+Return</source>
        <translation type="unfinished">Ctrl+Entrée</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="73"/>
        <source>&amp;Print</source>
        <translation type="unfinished">Im&amp;primer</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="76"/>
        <source>&amp;Import</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="79"/>
        <source>&amp;Export</source>
        <translation type="unfinished">&amp;Exporter</translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="324"/>
        <source>Import Text From File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="330"/>
        <source>Error Opening File</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ScriptEdit.cpp" line="367"/>
        <source>File Save Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ScriptWindow</name>
    <message>
        <source>QtiPlot - Python Script Window</source>
        <translation type="obsolete">QtiPlot - Fenêtre d&apos;édition de script</translation>
    </message>
    <message>
        <source>&amp;File</source>
        <translation type="obsolete">&amp;Fichier</translation>
    </message>
    <message>
        <source>&amp;Edit</source>
        <translation type="obsolete">&amp;Edition</translation>
    </message>
    <message>
        <source>E&amp;xecute</source>
        <translation type="obsolete">E&amp;xécuter</translation>
    </message>
    <message>
        <source>&amp;Hide</source>
        <translation type="obsolete">&amp;Cacher</translation>
    </message>
    <message>
        <source>Ctrl+N</source>
        <translation type="obsolete">Ctrl+N</translation>
    </message>
    <message>
        <source>Ctrl+O</source>
        <translation type="obsolete">Ctrl+O</translation>
    </message>
    <message>
        <source>Ctrl+S</source>
        <translation type="obsolete">Ctrl+S</translation>
    </message>
    <message>
        <source>Ctrl+P</source>
        <translation type="obsolete">Ctrl+P</translation>
    </message>
    <message>
        <source>Ctrl+Z</source>
        <translation type="obsolete">Ctrl+Z</translation>
    </message>
    <message>
        <source>Ctrl+Y</source>
        <translation type="obsolete">Ctrl+Y</translation>
    </message>
    <message>
        <source>Ctrl+x</source>
        <translation type="obsolete">Ctrl+x</translation>
    </message>
    <message>
        <source>Ctrl+C</source>
        <translation type="obsolete">Ctrl+C</translation>
    </message>
    <message>
        <source>Ctrl+V</source>
        <translation type="obsolete">Ctrl+V</translation>
    </message>
    <message>
        <source>Del</source>
        <translation type="obsolete">Suppr</translation>
    </message>
    <message>
        <source>CTRL+J</source>
        <translation type="obsolete">Ctrl+J</translation>
    </message>
    <message>
        <source>CTRL+SHIFT+J</source>
        <translation type="obsolete">Ctrl+Shift+J</translation>
    </message>
    <message>
        <source>CTRL+Return</source>
        <translation type="obsolete">Ctrl+Entrée</translation>
    </message>
    <message>
        <source>QtiPlot - File Save Error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de la sauvegarde du fichier</translation>
    </message>
    <message>
        <source>Could not write to file: &lt;br&gt;&lt;h4&gt; %1 &lt;/h4&gt;&lt;p&gt;Please verify that you have the right to write to this location!</source>
        <translation type="obsolete">Impossible d&apos;écrire le fichier &lt;br&gt;&lt;h4&gt; %1 &lt;/h4&gt;&lt;p&gt;. Vérifiez que vous avez les droits requis pour écrire à cet emplacement !</translation>
    </message>
    <message>
        <source>&amp;New</source>
        <translation type="obsolete">&amp;Nouveau</translation>
    </message>
    <message>
        <source>&amp;Open...</source>
        <translation type="obsolete">&amp;Ouvrir...</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation type="obsolete">&amp;Sauvegarder</translation>
    </message>
    <message>
        <source>Save &amp;As...</source>
        <translation type="obsolete">Sauveg&amp;arder sous...</translation>
    </message>
    <message>
        <source>&amp;Print</source>
        <translation type="obsolete">Im&amp;primer</translation>
    </message>
    <message>
        <source>&amp;Undo</source>
        <translation type="obsolete">Ann&amp;uler</translation>
    </message>
    <message>
        <source>&amp;Redo</source>
        <translation type="obsolete">&amp;Refaire</translation>
    </message>
    <message>
        <source>&amp;Cut</source>
        <translation type="obsolete">&amp;Couper</translation>
    </message>
    <message>
        <source>&amp;Copy</source>
        <translation type="obsolete">&amp;Copier</translation>
    </message>
    <message>
        <source>&amp;Paste</source>
        <translation type="obsolete">Coller</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Supprimer</translation>
    </message>
    <message>
        <source>Execute &amp;All</source>
        <translation type="obsolete">Tout exécuter</translation>
    </message>
    <message>
        <source>&amp;Evaluate Expression</source>
        <translation type="obsolete">Evaluer l&apos;expression</translation>
    </message>
    <message>
        <source>QtiPlot - Script Window</source>
        <translation type="obsolete">QtiPlot - Fenêtre de script</translation>
    </message>
</context>
<context>
    <name>ScriptingEnv</name>
    <message>
        <location filename="../src/ScriptingEnv.cpp" line="56"/>
        <source>%1 Source (*.%2);;</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>ScriptingLangDialog</name>
    <message>
        <source>QtiPlot - Select scripting language</source>
        <translation type="obsolete">QtiPlot -  Choix du langage de script</translation>
    </message>
    <message>
        <location filename="../src/ScriptingLangDialog.cpp" line="45"/>
        <source>OK</source>
        <translation>OK</translation>
    </message>
    <message>
        <location filename="../src/ScriptingLangDialog.cpp" line="46"/>
        <source>Cancel</source>
        <translation>Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Scripting Error</source>
        <translation type="obsolete">QtiPlot - Erreur de Script</translation>
    </message>
    <message>
        <location filename="../src/ScriptingLangDialog.cpp" line="80"/>
        <source>Scripting language &quot;%1&quot; failed to initialize.</source>
        <translation>L&apos;initialisation du langage de script &quot;%1&quot; a échouée.</translation>
    </message>
    <message>
        <location filename="../src/ScriptingLangDialog.cpp" line="41"/>
        <source>Select scripting language</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ScriptingLangDialog.cpp" line="79"/>
        <source>Scripting Error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SetColValuesDialog</name>
    <message>
        <source>QtiPlot - Set column values</source>
        <translation type="obsolete">Qtiplot - Propriétés de la colonne</translation>
    </message>
    <message>
        <source>For row (i)</source>
        <translation type="obsolete">Pour la rangée (i)</translation>
    </message>
    <message>
        <source>to</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>Add function</source>
        <translation type="obsolete">Ajouter la fonction</translation>
    </message>
    <message>
        <source>Add cell</source>
        <translation type="obsolete">Ajouter la cellule</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
</context>
<context>
    <name>SigmoidalFit</name>
    <message>
        <location filename="../src/SigmoidalFit.cpp" line="67"/>
        <source>(init value)</source>
        <translation>(valeur initiale)</translation>
    </message>
    <message>
        <location filename="../src/SigmoidalFit.cpp" line="67"/>
        <source>(final value)</source>
        <translation>(valeur finale)</translation>
    </message>
    <message>
        <location filename="../src/SigmoidalFit.cpp" line="67"/>
        <source>(center)</source>
        <translation>(centre)</translation>
    </message>
    <message>
        <location filename="../src/SigmoidalFit.cpp" line="67"/>
        <source>(time constant)</source>
        <translation>(constante de temps)</translation>
    </message>
    <message>
        <source>Boltzmann (Sigmoidal)</source>
        <translation type="obsolete">Boltzmann (Sigmoïdal)</translation>
    </message>
    <message>
        <location filename="../src/SigmoidalFit.cpp" line="69"/>
        <source>Boltzmann (Sigmoidal) Fit</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SmoothCurveDialog</name>
    <message>
        <source>QtiPlot - Smoothing Options</source>
        <translation type="obsolete">QtiPlot - Options de lissage</translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="53"/>
        <source>Curve</source>
        <translation type="unfinished">Courbe</translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="63"/>
        <source>Polynomial Order</source>
        <translation type="unfinished">Ordre</translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="69"/>
        <source>Points to the Left</source>
        <translation type="unfinished">Points à gauche</translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="75"/>
        <source>Points to the Right</source>
        <translation type="unfinished">Points à droite</translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="81"/>
        <location filename="../src/SmoothCurveDialog.cpp" line="94"/>
        <source>Color</source>
        <translation type="unfinished">Couleur</translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="87"/>
        <source>Points</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="100"/>
        <source>&amp;Smooth</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="102"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothCurveDialog.cpp" line="49"/>
        <source>Smoothing Options</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SmoothFilter</name>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="54"/>
        <source>Smoothed</source>
        <translation type="unfinished">Lissée</translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="67"/>
        <location filename="../src/SmoothFilter.cpp" line="213"/>
        <location filename="../src/SmoothFilter.cpp" line="220"/>
        <location filename="../src/SmoothFilter.cpp" line="234"/>
        <location filename="../src/SmoothFilter.cpp" line="241"/>
        <source>Error</source>
        <translation type="unfinished">Erreur</translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="68"/>
        <source>Unknown smooth filter. Valid values are: 1 - Savitky-Golay, 2 - FFT, 3 - Moving Window Average.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="86"/>
        <location filename="../src/SmoothFilter.cpp" line="90"/>
        <location filename="../src/SmoothFilter.cpp" line="94"/>
        <source>points</source>
        <translation type="unfinished">points</translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="86"/>
        <source>Savitzky-Golay smoothing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="90"/>
        <source>FFT smoothing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="94"/>
        <source>average smoothing</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="214"/>
        <source>The number of points must be positive!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="221"/>
        <location filename="../src/SmoothFilter.cpp" line="242"/>
        <source>The polynomial order must be lower than the number of left points plus the number of right points!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="235"/>
        <source>Setting polynomial order is only available for Savitzky-Golay smooth filters! Ignored option!</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SmoothFilter.cpp" line="67"/>
        <location filename="../src/SmoothFilter.cpp" line="213"/>
        <location filename="../src/SmoothFilter.cpp" line="220"/>
        <location filename="../src/SmoothFilter.cpp" line="234"/>
        <location filename="../src/SmoothFilter.cpp" line="241"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SortDialog</name>
    <message>
        <source>QtiPlot - Sorting Options</source>
        <translation type="obsolete">Qtiplot - Options pour le Tri</translation>
    </message>
    <message>
        <source>Sort columns</source>
        <translation type="obsolete">Trier les Colonnes</translation>
    </message>
    <message>
        <source>Order</source>
        <translation type="obsolete">Ordre</translation>
    </message>
    <message>
        <source>Leading column</source>
        <translation type="obsolete">Colonne triée</translation>
    </message>
    <message>
        <source>&amp;Sort</source>
        <translation type="obsolete">&amp;Trier</translation>
    </message>
    <message>
        <source>Separately</source>
        <translation type="obsolete">Séparement</translation>
    </message>
    <message>
        <source>Together</source>
        <translation type="obsolete">Ensemble</translation>
    </message>
    <message>
        <source>Ascending</source>
        <translation type="obsolete">&amp;Croissant</translation>
    </message>
    <message>
        <source>Descending</source>
        <translation type="obsolete">&amp;Décroissant</translation>
    </message>
</context>
<context>
    <name>SurfaceDialog</name>
    <message>
        <source>QtiPlot - Define surface plot</source>
        <translation type="obsolete">Qtiplot - Définition d&apos;un graphe de surface</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="51"/>
        <source>f(x,y)=</source>
        <translation type="unfinished">f(x,y) =</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="54"/>
        <source>X - axis</source>
        <translation type="unfinished">Axe des X</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="57"/>
        <location filename="../src/SurfaceDialog.cpp" line="72"/>
        <location filename="../src/SurfaceDialog.cpp" line="87"/>
        <source>-1</source>
        <translation type="unfinished">-1</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="60"/>
        <location filename="../src/SurfaceDialog.cpp" line="75"/>
        <location filename="../src/SurfaceDialog.cpp" line="90"/>
        <source>1</source>
        <translation type="unfinished">1</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="63"/>
        <location filename="../src/SurfaceDialog.cpp" line="78"/>
        <location filename="../src/SurfaceDialog.cpp" line="93"/>
        <source>From</source>
        <translation type="unfinished">De</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="65"/>
        <location filename="../src/SurfaceDialog.cpp" line="80"/>
        <location filename="../src/SurfaceDialog.cpp" line="95"/>
        <source>To</source>
        <translation type="unfinished">à</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="70"/>
        <source>Y - axis</source>
        <translation type="unfinished">Axe des Y</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="85"/>
        <source>Z - axis</source>
        <translation type="unfinished">Axe des Z</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="105"/>
        <source>Clear &amp;list</source>
        <translation type="unfinished">Effacer la &amp;liste</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="106"/>
        <source>&amp;OK</source>
        <translation type="unfinished">&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="108"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - X Start limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de X initial erronée</translation>
    </message>
    <message>
        <source>QtiPlot - X End limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de X final erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Y Start limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de Y initial erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Y End limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de Y final erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Z Start limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de Z initial erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Z End limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de Z final erronée</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="238"/>
        <source>Please enter limits that satisfy: from &lt; end!</source>
        <translation type="unfinished">Veuillez entrer un domaine pour les abscisses tel que le début soit inférieur à la fin !</translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="44"/>
        <source>Define surface plot</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="169"/>
        <source>X Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="181"/>
        <source>X End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="194"/>
        <source>Y Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="206"/>
        <source>Y End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="218"/>
        <source>Z Start limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="230"/>
        <source>Z End limit error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="237"/>
        <source>Input error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/SurfaceDialog.cpp" line="260"/>
        <source>Input function error</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>SymbolBox</name>
    <message>
        <location filename="../src/SymbolBox.cpp" line="74"/>
        <source>No Symbol</source>
        <translation>Aucun</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="78"/>
        <source>Ellipse</source>
        <translation>Ellipse</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="83"/>
        <source>Rectangle</source>
        <translation>Rectangle</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="88"/>
        <source>Diamond</source>
        <translation>Diamant</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="93"/>
        <source>Triangle</source>
        <translation>Triangle 1</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="98"/>
        <source>Down Triangle</source>
        <translation>Triangle 2</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="103"/>
        <source>Up Triangle</source>
        <translation>Triangle 3</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="108"/>
        <source>Left Triangle</source>
        <translation>Triangle 4</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="113"/>
        <source>Right Triangle</source>
        <translation>Triangle 5</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="118"/>
        <source>Cross</source>
        <translation>Croix 1</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="123"/>
        <source>Diagonal Cross</source>
        <translation>Croix 2</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="128"/>
        <source>Horizontal Line</source>
        <translation>Ligne horizontale</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="133"/>
        <source>Vertical Line</source>
        <translation>Ligne verticale</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="138"/>
        <source>Star 1</source>
        <translation>Etoile 1</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="143"/>
        <source>Star 2</source>
        <translation>Etoile 2</translation>
    </message>
    <message>
        <location filename="../src/SymbolBox.cpp" line="148"/>
        <source>Hexagon</source>
        <translation>Hexagone</translation>
    </message>
</context>
<context>
    <name>SymbolDialog</name>
    <message>
        <location filename="../src/SymbolDialog.cpp" line="58"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>QtiPlot - Choose Symbol</source>
        <translation type="obsolete">QtiPlot - Choisir le Symbole</translation>
    </message>
    <message>
        <location filename="../src/SymbolDialog.cpp" line="396"/>
        <source>Choose Symbol</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>Table</name>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">Qtiplot - Erreur</translation>
    </message>
    <message>
        <source>Choose a filename to save under</source>
        <translation type="obsolete">Choisissez un nom pour sauvegarder ce fichier</translation>
    </message>
    <message>
        <source>QtiPlot - Overwrite File?</source>
        <translation type="obsolete">Qtiplot - Ecraser ce fichier?</translation>
    </message>
    <message>
        <source>A file called: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;already exists. Do you want to overwrite it?</source>
        <translation type="obsolete">Un fichier nommé: &lt;p&gt;&lt;b&gt;%1&lt;/b&gt;&lt;p&gt;existe déjà. Voulez-vous l&apos;écraser?</translation>
    </message>
    <message>
        <source>&amp;Yes</source>
        <translation type="obsolete">&amp;Oui</translation>
    </message>
    <message>
        <source>&amp;No</source>
        <translation type="obsolete">&amp;Non</translation>
    </message>
    <message>
        <source>QtiPlot - ASCII Export Error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;exportation en ASCII</translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">Qtiplot</translation>
    </message>
    <message>
        <source>Please select two columns for this operation!</source>
        <translation type="obsolete">Sélectionnez 2 colonnes pour cette opération !</translation>
    </message>
    <message>
        <source>Could not allocate memory, operation aborted!</source>
        <translation type="obsolete">Allocation mémoire impossible, Opération annulée !</translation>
    </message>
    <message>
        <source>Error in GSL forward FFT operation!</source>
        <translation type="obsolete">Erreur de la librarie GSL sur la FFT !</translation>
    </message>
    <message>
        <source>Please select two columns for this operation:
 the first represents the signal and the second the response function!</source>
        <translation type="obsolete">Sélectionnez 2 colonnes pour cette opération :
La première représente le signal et la seconde la réponse de la fonction !</translation>
    </message>
    <message>
        <source>The response dataset &apos;%1&apos; must be less then half the size of the signal dataset &apos;%2&apos;!</source>
        <translation type="obsolete">Les données de la réponse &apos;%1&apos; doivent être de moitié inférieure à la taille des données du signal &apos;%2&apos; !</translation>
    </message>
    <message>
        <source>The response dataset &apos;%1&apos; must contain an odd number of points!</source>
        <translation type="obsolete">Les données de la réponse &apos;%1&apos; doivent contenir un nombre de points impaires !</translation>
    </message>
    <message>
        <source>Frequency</source>
        <translation type="obsolete">Fréquence</translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="obsolete">Temps</translation>
    </message>
    <message>
        <source>Real</source>
        <translation type="obsolete">Réel</translation>
    </message>
    <message>
        <source>Imaginary</source>
        <translation type="obsolete">Imaginaire</translation>
    </message>
    <message>
        <source>Amplitude</source>
        <translation type="obsolete">Amplitude</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="obsolete">Angle</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="obsolete">Oui</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="obsolete">Non</translation>
    </message>
    <message>
        <location filename="../src/Table.cpp" line="1110"/>
        <source>Cancel</source>
        <translation>Annuler</translation>
    </message>
    <message>
        <source>Please select a Y column to plot!</source>
        <translation type="obsolete">Sélectionnez une colonne Y à tracer !</translation>
    </message>
    <message>
        <source>Please set a default X column for this table, first!</source>
        <translation type="obsolete">Sélectionnez d&apos;abord une colonne X par défaut pour cette table !</translation>
    </message>
    <message>
        <source>Please select four columns for this operation!</source>
        <translation type="obsolete">Sélectionnez quatre colonnes pour cette opération !</translation>
    </message>
    <message>
        <source>You need at least two columns for this operation!</source>
        <translation type="obsolete">Vous avez besoin d&apos;au moins deux colonnes pour cette opération !</translation>
    </message>
    <message>
        <source>Please select a Z column for this operation!</source>
        <translation type="obsolete">Sélectionnez une colonne Z pour cette opération !</translation>
    </message>
    <message>
        <source>You need to define a X column first!</source>
        <translation type="obsolete">Vous devez d&apos;abord définir une colonne X !</translation>
    </message>
    <message>
        <source>You need to define a Y column first!</source>
        <translation type="obsolete">Vous devez d&apos;abord définir une colonne Y !</translation>
    </message>
    <message>
        <source>Rows will be deleted from the table!</source>
        <translation type="obsolete">Les rangées seront effacées de cette table !</translation>
    </message>
    <message>
        <source>Do you really want to continue?</source>
        <translation type="obsolete">Voulez-vous vraiment continuer ?</translation>
    </message>
    <message>
        <source>Columns will be deleted from the table!</source>
        <translation type="obsolete">Les colonnes seront effacées de la table !</translation>
    </message>
    <message>
        <source>Qtiplot - Reading file...</source>
        <translation type="obsolete">Qtiplot - Lecture du fichier...</translation>
    </message>
    <message>
        <location filename="../src/Table.cpp" line="1108"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="obsolete">Erreur</translation>
    </message>
    <message>
        <location filename="../src/Table.cpp" line="998"/>
        <source>ASCII Export Error</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Table.cpp" line="999"/>
        <source>Could not write to file: &lt;br&gt;&lt;h4&gt;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/Table.cpp" line="1109"/>
        <source>Do you want to hide or delete</source>
        <translation type="unfinished">Voulez-vous Cacher ou Supprimer</translation>
    </message>
    <message>
        <location filename="../src/Table.cpp" line="1110"/>
        <source>Delete</source>
        <translation type="unfinished">Supprimer</translation>
    </message>
    <message>
        <location filename="../src/Table.cpp" line="1110"/>
        <source>Hide</source>
        <translation type="unfinished">Cacher</translation>
    </message>
    <message>
        <location filename="../src/Table.cpp" line="1341"/>
        <source>%1: apply formula to column</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TableDialog</name>
    <message>
        <source>QtiPlot - Column options</source>
        <translation type="obsolete">QtiPlot - Propriétés de la colonne</translation>
    </message>
    <message>
        <source>Column Name:</source>
        <translation type="obsolete">Nom de colonne :</translation>
    </message>
    <message>
        <source>Enumerate all to the right</source>
        <translation type="obsolete">Énumérer les colonnes à partir de la droite</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>Plot Designation:</source>
        <translation type="obsolete">Nom du graphe :</translation>
    </message>
    <message>
        <source>X (abscissae)</source>
        <translation type="obsolete">X (abscisses)</translation>
    </message>
    <message>
        <source>Y (ordinates)</source>
        <translation type="obsolete">Y (ordonnées)</translation>
    </message>
    <message>
        <source>Z (height)</source>
        <translation type="obsolete">Z (hauteur)</translation>
    </message>
    <message>
        <source>X Error</source>
        <translation type="obsolete">Erreur en X</translation>
    </message>
    <message>
        <source>Y Error</source>
        <translation type="obsolete">Erreur en Y</translation>
    </message>
    <message>
        <source>Display</source>
        <translation type="obsolete">Affichage :</translation>
    </message>
    <message>
        <source>Numeric</source>
        <translation type="obsolete">Numérique</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">Texte</translation>
    </message>
    <message>
        <source>Date</source>
        <translation type="obsolete">Date</translation>
    </message>
    <message>
        <source>Month</source>
        <translation type="obsolete">Mois</translation>
    </message>
    <message>
        <source>Day of Week</source>
        <translation type="obsolete">Jour de la semaine</translation>
    </message>
    <message>
        <source>Format:</source>
        <translation type="obsolete">Format :</translation>
    </message>
    <message>
        <source>Precision:</source>
        <translation type="obsolete">Précision :</translation>
    </message>
    <message>
        <source>Apply to all columns to the right</source>
        <translation type="obsolete">Appliquer à toutes les colonnes vers la droite</translation>
    </message>
    <message>
        <source>Column Width:</source>
        <translation type="obsolete">largeur de colonne :</translation>
    </message>
    <message>
        <source>Apply to all</source>
        <translation type="obsolete">Appliquer à toutes</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation type="obsolete">Commentaire :</translation>
    </message>
    <message>
        <source>For internal consistency reasons the underscore character is replaced with a minus sign.</source>
        <translation type="obsolete">Pour des raisons d&apos;uniformité, le trait souligné (_) est remplacé par le signe moins (-).</translation>
    </message>
    <message>
        <source>The column names must only contain letters and digits!</source>
        <translation type="obsolete">Les noms de colonnes doivent seulement contenir des lettres et des chiffres !</translation>
    </message>
    <message>
        <source>Default</source>
        <translation type="obsolete">Par défaut</translation>
    </message>
    <message>
        <source>Decimal: 1000</source>
        <translation type="obsolete">Décimal : 1000</translation>
    </message>
    <message>
        <source>Scientific: 1E3</source>
        <translation type="obsolete">Scientifique : 1E3</translation>
    </message>
    <message>
        <source>yyyy-MM-dd</source>
        <translation type="obsolete">aaaa-MM-jj</translation>
    </message>
    <message>
        <source>h</source>
        <translation type="obsolete">h</translation>
    </message>
    <message>
        <source>h ap</source>
        <translation type="obsolete">h ap</translation>
    </message>
    <message>
        <source>h AP</source>
        <translation type="obsolete">h AP</translation>
    </message>
    <message>
        <source>h:mm</source>
        <translation type="obsolete">h:mm</translation>
    </message>
    <message>
        <source>h:mm ap</source>
        <translation type="obsolete">h:mm ap</translation>
    </message>
    <message>
        <source>hh:mm</source>
        <translation type="obsolete">hh:mm</translation>
    </message>
    <message>
        <source>h:mm:ss</source>
        <translation type="obsolete">h:mm:ss</translation>
    </message>
    <message>
        <source>h:mm:ss.zzz</source>
        <translation type="obsolete">h:mm:ss.mmm</translation>
    </message>
    <message>
        <source>mm:ss</source>
        <translation type="obsolete">mm:ss</translation>
    </message>
    <message>
        <source>mm:ss.zzz</source>
        <translation type="obsolete">mm:ss.mmm</translation>
    </message>
    <message>
        <source>hmm</source>
        <translation type="obsolete">hmm</translation>
    </message>
    <message>
        <source>hmmss</source>
        <translation type="obsolete">hmmss</translation>
    </message>
    <message>
        <source>hhmmss</source>
        <translation type="obsolete">hhmmss</translation>
    </message>
    <message>
        <source>dd/MM/yyyy</source>
        <translation type="obsolete">jj/MM/aaaa</translation>
    </message>
    <message>
        <source>dd.MM.yyyy</source>
        <translation type="obsolete">jj.MM.aaaa</translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="obsolete">Erreur</translation>
    </message>
</context>
<context>
    <name>TableModel</name>
    <message>
        <location filename="../src/future/table/TableModel.cpp" line="101"/>
        <source>(masked)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableModel.cpp" line="103"/>
        <source>invalid cell (ignored in all operations)</source>
        <comment>tooltip string for invalid rows</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableModel.cpp" line="112"/>
        <source>-</source>
        <comment>string for invalid rows</comment>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TableStatistics</name>
    <message>
        <location filename="../src/TableStatistics.cpp" line="85"/>
        <source>Row Statistics of %1</source>
        <translation>Statistiques de la rangée de %1</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="88"/>
        <source>Row</source>
        <translation>Rangée</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="89"/>
        <source>Cols</source>
        <translation>Colonnes</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="90"/>
        <location filename="../src/TableStatistics.cpp" line="124"/>
        <source>Mean</source>
        <translation>Moyenne</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="92"/>
        <location filename="../src/TableStatistics.cpp" line="126"/>
        <source>Variance</source>
        <translation>Variance</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="93"/>
        <location filename="../src/TableStatistics.cpp" line="127"/>
        <source>Sum</source>
        <translation>Somme</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="94"/>
        <location filename="../src/TableStatistics.cpp" line="129"/>
        <source>Max</source>
        <translation>Max</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="95"/>
        <location filename="../src/TableStatistics.cpp" line="131"/>
        <source>Min</source>
        <translation>Min</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="119"/>
        <source>Column Statistics of %1</source>
        <translation>Statistiques de la colonne de %1</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="122"/>
        <source>Col</source>
        <translation>Colonne</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="123"/>
        <source>Rows</source>
        <translation>Rangées</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="128"/>
        <source>iMax</source>
        <translation>iMax</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="130"/>
        <source>iMin</source>
        <translation>iMin</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="84"/>
        <source>RowStats</source>
        <translation>Stats Rangée</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="91"/>
        <location filename="../src/TableStatistics.cpp" line="125"/>
        <source>StandardDev</source>
        <translation>Ecart-type</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="118"/>
        <source>ColStats</source>
        <translation>Stats colonne</translation>
    </message>
    <message>
        <location filename="../src/TableStatistics.cpp" line="356"/>
        <source>S&amp;et Column(s) As</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TableView</name>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="161"/>
        <source>Ctrl+A</source>
        <comment>Table: select all</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="229"/>
        <source>Show/hide control tabs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="233"/>
        <source>Numeric</source>
        <translation type="unfinished">Numérique</translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="234"/>
        <location filename="../src/future/table/TableView.cpp" line="423"/>
        <source>Text</source>
        <translation type="unfinished">Texte</translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="235"/>
        <source>Month names</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="236"/>
        <source>Day names</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="237"/>
        <source>Date and time</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="241"/>
        <source>years</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="242"/>
        <source>months</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="243"/>
        <source>days</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="244"/>
        <source>hours</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="245"/>
        <source>minutes</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="246"/>
        <source>seconds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="247"/>
        <source>milliseconds</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="339"/>
        <source>Current column:
Name: %1
Position: %2</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="416"/>
        <source>Decimal</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="417"/>
        <source>Scientific (e)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="418"/>
        <source>Scientific (E)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="426"/>
        <location filename="../src/future/table/TableView.cpp" line="432"/>
        <source>Number without leading zero</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="427"/>
        <location filename="../src/future/table/TableView.cpp" line="433"/>
        <source>Number with leading zero</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="428"/>
        <source>Abbreviated month name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="429"/>
        <source>Full month name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="434"/>
        <source>Abbreviated day name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="435"/>
        <source>Full day name</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="488"/>
        <location filename="../src/future/table/TableView.cpp" line="561"/>
        <source>Predefined:</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="490"/>
        <location filename="../src/future/table/TableView.cpp" line="563"/>
        <source>Format:</source>
        <translation type="unfinished">Format :</translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="502"/>
        <location filename="../src/future/table/TableView.cpp" line="572"/>
        <source>Selected column type:
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="509"/>
        <source>Double precision
floating point values
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="513"/>
        <source>Text
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="516"/>
        <source>Month names
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="519"/>
        <source>Days of the week
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="522"/>
        <location filename="../src/future/table/TableView.cpp" line="548"/>
        <location filename="../src/future/table/TableView.cpp" line="573"/>
        <source>Dates and/or times
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="526"/>
        <location filename="../src/future/table/TableView.cpp" line="550"/>
        <location filename="../src/future/table/TableView.cpp" line="574"/>
        <source>Example: </source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="533"/>
        <source>Hello world!
</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="419"/>
        <source>Automatic (e)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/TableView.cpp" line="420"/>
        <source>Automatic (E)</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TextDialog</name>
    <message>
        <source>QtiPlot - Text options</source>
        <translation type="obsolete">QtiPlot - Options du Texte</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="67"/>
        <source>&amp;OK</source>
        <translation>&amp;OK</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="75"/>
        <source>Font</source>
        <translation>Police</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="77"/>
        <source>&amp;Font</source>
        <translation>Police</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="82"/>
        <source>&amp;Apply</source>
        <translation>&amp;Appliquer</translation>
    </message>
    <message>
        <source>Alignement</source>
        <translation type="obsolete">Alignement</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="93"/>
        <source>Center</source>
        <translation>Centré</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="94"/>
        <source>Left</source>
        <translation>Gauche</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="95"/>
        <source>Right</source>
        <translation>Droite</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="102"/>
        <source>Frame</source>
        <translation>Cadre</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="104"/>
        <source>None</source>
        <translation>Aucun</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="105"/>
        <source>Rectangle</source>
        <translation>Rectangle</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="106"/>
        <source>Shadow</source>
        <translation>Ombré</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="110"/>
        <source>&amp;Cancel</source>
        <translation>Annuler</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">Arrière Plan</translation>
    </message>
    <message>
        <source>Rotate (deg.)</source>
        <translation type="obsolete">Rotation (deg.)</translation>
    </message>
    <message>
        <source>0</source>
        <translation type="obsolete">0</translation>
    </message>
    <message>
        <source>45</source>
        <translation type="obsolete">45</translation>
    </message>
    <message>
        <source>90</source>
        <translation type="obsolete">90</translation>
    </message>
    <message>
        <source>135</source>
        <translation type="obsolete">135</translation>
    </message>
    <message>
        <source>180</source>
        <translation type="obsolete">180</translation>
    </message>
    <message>
        <source>225</source>
        <translation type="obsolete">225</translation>
    </message>
    <message>
        <source>270</source>
        <translation type="obsolete">270</translation>
    </message>
    <message>
        <source>315</source>
        <translation type="obsolete">315</translation>
    </message>
    <message>
        <source>B</source>
        <translation type="obsolete">B</translation>
    </message>
    <message>
        <source>It</source>
        <translation type="obsolete">It</translation>
    </message>
    <message>
        <source>U</source>
        <translation type="obsolete">U</translation>
    </message>
    <message>
        <source>Set &amp;Default</source>
        <translation type="obsolete">&amp;Défault</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="61"/>
        <source>Text Color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="91"/>
        <source>Alignment</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="116"/>
        <source>Opacity</source>
        <translation type="unfinished">Opacité</translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="121"/>
        <source>Transparent</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="126"/>
        <source>Background color</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="136"/>
        <source>Set As &amp;Default</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/TextDialog.cpp" line="50"/>
        <source>Text options</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TextFormatButtons</name>
    <message>
        <location filename="../src/TextFormatButtons.cpp" line="92"/>
        <source>B</source>
        <comment>Button bold</comment>
        <translation type="unfinished">B</translation>
    </message>
    <message>
        <location filename="../src/TextFormatButtons.cpp" line="101"/>
        <source>It</source>
        <comment>Button italics</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/TextFormatButtons.cpp" line="110"/>
        <source>U</source>
        <comment>Button underline</comment>
        <translation type="unfinished">U</translation>
    </message>
</context>
<context>
    <name>ThreeExpFit</name>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="245"/>
        <source>(first amplitude)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="245"/>
        <source>(first lifetime)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="245"/>
        <source>(second amplitude)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="246"/>
        <source>(second lifetime)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="246"/>
        <source>(third amplitude)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="246"/>
        <source>(third lifetime)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="246"/>
        <source>(offset)</source>
        <translation type="unfinished">(décalage)</translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="243"/>
        <source>Exponential decay</source>
        <translation>Décroissance exponentielle</translation>
    </message>
</context>
<context>
    <name>TranslateCurveTool</name>
    <message>
        <location filename="../src/TranslateCurveTool.cpp" line="68"/>
        <source>Curve selected! Move cursor and click to choose a point and double-click/press &apos;Enter&apos; to finish!</source>
        <translation type="unfinished">Courbe sélectionnée ! Déplacez le curseur et cliquez pour choisir un point puis double-cliquez ou appuyez sur &apos;Entrée&apos; pour terminer !</translation>
    </message>
    <message>
        <location filename="../src/TranslateCurveTool.cpp" line="82"/>
        <source>This operation cannot be performed on function curves.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/TranslateCurveTool.cpp" line="120"/>
        <source>This operation cannot be performed on curves plotted from columns having a non-numerical format.</source>
        <translation type="unfinished">Cette opération ne peut être réalisée sur des courbes ayant des colonnes au format non numérique.</translation>
    </message>
    <message>
        <location filename="../src/TranslateCurveTool.cpp" line="81"/>
        <location filename="../src/TranslateCurveTool.cpp" line="119"/>
        <source>Warning</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>TwoExpFit</name>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="168"/>
        <source>(first amplitude)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="168"/>
        <source>(first lifetime)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="168"/>
        <source>(second amplitude)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="169"/>
        <source>(second lifetime)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="169"/>
        <source>(offset)</source>
        <translation type="unfinished">(décalage)</translation>
    </message>
    <message>
        <location filename="../src/ExponentialFit.cpp" line="166"/>
        <source>Exponential decay</source>
        <translation>Décroissance exponentielle</translation>
    </message>
</context>
<context>
    <name>analysisDialog</name>
    <message>
        <source>QtiPlot - Analysis Option</source>
        <translation type="obsolete">QtiPlot - Options d&apos;analyse</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Analysis Options</source>
        <translation type="obsolete">QtiPlot - Options d&apos;analyses</translation>
    </message>
</context>
<context>
    <name>associationsDialog</name>
    <message>
        <source>QtiPlot - Plot Associations</source>
        <translation type="obsolete">QtiPlot - Association de graphes</translation>
    </message>
    <message>
        <source>Column</source>
        <translation type="obsolete">Colonne</translation>
    </message>
    <message>
        <source>X</source>
        <translation type="obsolete">X</translation>
    </message>
    <message>
        <source>Y</source>
        <translation type="obsolete">Y</translation>
    </message>
    <message>
        <source>xErr</source>
        <translation type="obsolete">xErr</translation>
    </message>
    <message>
        <source>yErr</source>
        <translation type="obsolete">yErr</translation>
    </message>
    <message>
        <source>&amp;Update curve</source>
        <translation type="obsolete">&amp;Modifier la courbe</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>xEnd</source>
        <translation type="obsolete">xEnd</translation>
    </message>
    <message>
        <source>yEnd</source>
        <translation type="obsolete">yEnd</translation>
    </message>
    <message>
        <source>Spreadsheet: </source>
        <translation type="obsolete">Feuille de calcul : </translation>
    </message>
</context>
<context>
    <name>axesDialog</name>
    <message>
        <source>QtiPlot - General Plot Options</source>
        <translation type="obsolete">Qtiplot - Options générales pour les graphes</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>From</source>
        <translation type="obsolete">De</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">Type</translation>
    </message>
    <message>
        <source>linear</source>
        <translation type="obsolete">linéaire</translation>
    </message>
    <message>
        <source>logarithmic</source>
        <translation type="obsolete">logarithmique</translation>
    </message>
    <message>
        <source>Inverted</source>
        <translation type="obsolete">Inversé</translation>
    </message>
    <message>
        <source>Step</source>
        <translation type="obsolete">Intervalle</translation>
    </message>
    <message>
        <source>Major Ticks</source>
        <translation type="obsolete">Graduations Principales</translation>
    </message>
    <message>
        <source>Minor Ticks</source>
        <translation type="obsolete">Graduations Secondaires</translation>
    </message>
    <message>
        <source>Horizontal</source>
        <translation type="obsolete">Horizontale</translation>
    </message>
    <message>
        <source>Vertical</source>
        <translation type="obsolete">Verticale</translation>
    </message>
    <message>
        <source>Scale</source>
        <translation type="obsolete">Échelle</translation>
    </message>
    <message>
        <source>Major Grids</source>
        <translation type="obsolete">Grille Principale</translation>
    </message>
    <message>
        <source>Minor Grids</source>
        <translation type="obsolete">Grille Secondaire</translation>
    </message>
    <message>
        <source>Line Color</source>
        <translation type="obsolete">Couleur des Lignes</translation>
    </message>
    <message>
        <source>Line Type</source>
        <translation type="obsolete">Type de Lignes</translation>
    </message>
    <message>
        <source>Thickness</source>
        <translation type="obsolete">Épaisseur</translation>
    </message>
    <message>
        <source>Additional lines</source>
        <translation type="obsolete">Lignes supplémentaires</translation>
    </message>
    <message>
        <source>X=0</source>
        <translation type="obsolete">X = 0</translation>
    </message>
    <message>
        <source>Y=0</source>
        <translation type="obsolete">Y = 0</translation>
    </message>
    <message>
        <source>Grid</source>
        <translation type="obsolete">Grille</translation>
    </message>
    <message>
        <source>Show</source>
        <translation type="obsolete">Voir</translation>
    </message>
    <message>
        <source>Title</source>
        <translation type="obsolete">Titre</translation>
    </message>
    <message>
        <source>Numeric</source>
        <translation type="obsolete">Numérique</translation>
    </message>
    <message>
        <source>Text from table</source>
        <translation type="obsolete">Texte de la table</translation>
    </message>
    <message>
        <source>Day of the week</source>
        <translation type="obsolete">Jour de la semaine</translation>
    </message>
    <message>
        <source>Month</source>
        <translation type="obsolete">Mois</translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="obsolete">Heure</translation>
    </message>
    <message>
        <source>Date</source>
        <translation type="obsolete">Date</translation>
    </message>
    <message>
        <source>Font</source>
        <translation type="obsolete">Police</translation>
    </message>
    <message>
        <source>Axis &amp;Font</source>
        <translation type="obsolete">Modi&amp;fier</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>Co&amp;lor</source>
        <translation type="obsolete">Modifier</translation>
    </message>
    <message>
        <source>Ticks</source>
        <translation type="obsolete">Graduations</translation>
    </message>
    <message>
        <source>In</source>
        <translation type="obsolete">Au dessus de l&apos;axe</translation>
    </message>
    <message>
        <source>Out</source>
        <translation type="obsolete">Au dessous de l&apos;axe</translation>
    </message>
    <message>
        <source>Both</source>
        <translation type="obsolete">Au dessus et en dessous</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Aucune</translation>
    </message>
    <message>
        <source>Stand-off</source>
        <translation type="obsolete">Décalage</translation>
    </message>
    <message>
        <source>Show Labels</source>
        <translation type="obsolete">Afficher les étiquettes</translation>
    </message>
    <message>
        <source>Table</source>
        <translation type="obsolete">Table</translation>
    </message>
    <message>
        <source>Format</source>
        <translation type="obsolete">Format</translation>
    </message>
    <message>
        <source>Automatic</source>
        <translation type="obsolete">Automatique</translation>
    </message>
    <message>
        <source>Decimal: 100.0</source>
        <translation type="obsolete">Décimal : 100.0</translation>
    </message>
    <message>
        <source>Scientific: 1e2</source>
        <translation type="obsolete">Scientifique : 1e2</translation>
    </message>
    <message>
        <source>Scientific: 10^2</source>
        <translation type="obsolete">Ingénieur : 10^2</translation>
    </message>
    <message>
        <source>Precision</source>
        <translation type="obsolete">Précision</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="obsolete">Angle</translation>
    </message>
    <message>
        <source>For&amp;mula</source>
        <translation type="obsolete">For&amp;mule</translation>
    </message>
    <message>
        <source>Axis</source>
        <translation type="obsolete">Axe</translation>
    </message>
    <message>
        <source>Canvas frame</source>
        <translation type="obsolete">Bordure du cadre</translation>
    </message>
    <message>
        <source>C&amp;olor</source>
        <translation type="obsolete">M&amp;odifier</translation>
    </message>
    <message>
        <source>Width</source>
        <translation type="obsolete">Largeur</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">Arrière Plan</translation>
    </message>
    <message>
        <source>Border Width</source>
        <translation type="obsolete">Épaisseur de la bordure</translation>
    </message>
    <message>
        <source>Border Color</source>
        <translation type="obsolete">Couleur de la bordure</translation>
    </message>
    <message>
        <source>Colo&amp;r</source>
        <translation type="obsolete">Modifie&amp;r</translation>
    </message>
    <message>
        <source>Axes</source>
        <translation type="obsolete">Axes</translation>
    </message>
    <message>
        <source>Draw backbones</source>
        <translation type="obsolete">Axes visibles</translation>
    </message>
    <message>
        <source>Line Width</source>
        <translation type="obsolete">Largeur de ligne</translation>
    </message>
    <message>
        <source>Major ticks length</source>
        <translation type="obsolete">Longueur des graduations principales</translation>
    </message>
    <message>
        <source>Minor ticks length</source>
        <translation type="obsolete">Longueur des graduations secondaires</translation>
    </message>
    <message>
        <source>Margin</source>
        <translation type="obsolete">Marge</translation>
    </message>
    <message>
        <source>Apply to all layers</source>
        <translation type="obsolete">Appliquer à toutes les planches</translation>
    </message>
    <message>
        <source>General</source>
        <translation type="obsolete">Général</translation>
    </message>
    <message>
        <source>h</source>
        <translation type="obsolete">h</translation>
    </message>
    <message>
        <source>h ap</source>
        <translation type="obsolete">h ap</translation>
    </message>
    <message>
        <source>h AP</source>
        <translation type="obsolete">h AP</translation>
    </message>
    <message>
        <source>h:mm</source>
        <translation type="obsolete">h:mm</translation>
    </message>
    <message>
        <source>h:mm ap</source>
        <translation type="obsolete">h:mm ap</translation>
    </message>
    <message>
        <source>hh:mm</source>
        <translation type="obsolete">hh:mm</translation>
    </message>
    <message>
        <source>h:mm:ss</source>
        <translation type="obsolete">h:mm:ss</translation>
    </message>
    <message>
        <source>h:mm:ss.zzz</source>
        <translation type="obsolete">h:mm:ss.mmm</translation>
    </message>
    <message>
        <source>mm:ss</source>
        <translation type="obsolete">mm:ss</translation>
    </message>
    <message>
        <source>mm:ss.zzz</source>
        <translation type="obsolete">mm:ss.mmm</translation>
    </message>
    <message>
        <source>hmm</source>
        <translation type="obsolete">hmm</translation>
    </message>
    <message>
        <source>hmmss</source>
        <translation type="obsolete">hmmss</translation>
    </message>
    <message>
        <source>hhmmss</source>
        <translation type="obsolete">hhmmss</translation>
    </message>
    <message>
        <source>yyyy-MM-dd</source>
        <translation type="obsolete">aaaa-MM-jj</translation>
    </message>
    <message>
        <source>dd.MM.yyyy</source>
        <translation type="obsolete">jj.MM.aaaa</translation>
    </message>
    <message>
        <source>ddd MMMM d yy</source>
        <translation type="obsolete">jjj MMMM j aa</translation>
    </message>
    <message>
        <source>dd/MM/yyyy</source>
        <translation type="obsolete">jj/MM/aaaa</translation>
    </message>
    <message>
        <source>QtiPlot - Start limit error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite de départ</translation>
    </message>
    <message>
        <source>QtiPlot - End limit error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite d&apos;arrêt</translation>
    </message>
    <message>
        <source>QtiPlot - Step input error</source>
        <translation type="obsolete">Qtiplot - Erreur d&apos;intervalle</translation>
    </message>
    <message>
        <source>Please enter a positive step value!</source>
        <translation type="obsolete">Veuillez entrer une valeur d&apos;intervalle positive !</translation>
    </message>
    <message>
        <source>QtiPlot - Formula input error</source>
        <translation type="obsolete">QtiPlot - Erreur de formule</translation>
    </message>
    <message>
        <source>Valid variables are &apos;x&apos; for Top/Bottom axes and &apos;y&apos; for Left/Right axes!</source>
        <translation type="obsolete">Les variables ne peuvent être que &apos;x&apos; pour les axes supérieur/inférieur et &apos;y&apos; pour les axes latéraux !</translation>
    </message>
    <message>
        <source>milisec.</source>
        <translation type="obsolete">milisec.</translation>
    </message>
    <message>
        <source>sec.</source>
        <translation type="obsolete">sec.</translation>
    </message>
    <message>
        <source>min.</source>
        <translation type="obsolete">min.</translation>
    </message>
    <message>
        <source>hours</source>
        <translation type="obsolete">heures</translation>
    </message>
    <message>
        <source>days</source>
        <translation type="obsolete">jours</translation>
    </message>
    <message>
        <source>weeks</source>
        <translation type="obsolete">semaines</translation>
    </message>
    <message>
        <source>&amp;Font</source>
        <translation type="obsolete">Police</translation>
    </message>
    <message>
        <source>B</source>
        <translation type="obsolete">B</translation>
    </message>
    <message>
        <source>It</source>
        <translation type="obsolete">it</translation>
    </message>
    <message>
        <source>U</source>
        <translation type="obsolete">U</translation>
    </message>
    <message>
        <source>Column Headings</source>
        <translation type="obsolete">En-têtes de colonnes</translation>
    </message>
    <message>
        <source>In &amp; Out</source>
        <translation type="obsolete">Au dessus et en dessous</translation>
    </message>
    <message>
        <source>Canvas Color</source>
        <translation type="obsolete">Couleur du cadre</translation>
    </message>
    <message>
        <source>millisec.</source>
        <translation type="obsolete">ms.</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation type="obsolete">Inférieur</translation>
    </message>
    <message>
        <source>Left</source>
        <translation type="obsolete">Gauche</translation>
    </message>
    <message>
        <source>Top</source>
        <translation type="obsolete">Supérieur</translation>
    </message>
    <message>
        <source>Right</source>
        <translation type="obsolete">Droite</translation>
    </message>
</context>
<context>
    <name>configDialog</name>
    <message>
        <source>Application</source>
        <translation type="obsolete">Application</translation>
    </message>
    <message>
        <source>Confirmations</source>
        <translation type="obsolete">Confirmations</translation>
    </message>
    <message>
        <source>Tables</source>
        <translation type="obsolete">Tables</translation>
    </message>
    <message>
        <source>2D Plots</source>
        <translation type="obsolete">Graphes 2D</translation>
    </message>
    <message>
        <source>2D Curves</source>
        <translation type="obsolete">Courbes 2D</translation>
    </message>
    <message>
        <source>Colors</source>
        <translation type="obsolete">Couleurs</translation>
    </message>
    <message>
        <source>Fonts</source>
        <translation type="obsolete">Police</translation>
    </message>
    <message>
        <source>Prompt on closing</source>
        <translation type="obsolete">Confirmer les fermetures de</translation>
    </message>
    <message>
        <source>Matrixes</source>
        <translation type="obsolete">Matrices</translation>
    </message>
    <message>
        <source>3D Plots</source>
        <translation type="obsolete">Graphes 3D</translation>
    </message>
    <message>
        <source>Options</source>
        <translation type="obsolete">Options</translation>
    </message>
    <message>
        <source>Frame width</source>
        <translation type="obsolete">Epaisseur du cadre</translation>
    </message>
    <message>
        <source>Legend frame</source>
        <translation type="obsolete">Cadre autour de la légende</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Aucun</translation>
    </message>
    <message>
        <source>Rectangle</source>
        <translation type="obsolete">Rectangle</translation>
    </message>
    <message>
        <source>Shadow</source>
        <translation type="obsolete">Ombré</translation>
    </message>
    <message>
        <source>White out</source>
        <translation type="obsolete">Contour blanc</translation>
    </message>
    <message>
        <source>Black out</source>
        <translation type="obsolete">Contour noir</translation>
    </message>
    <message>
        <source>Ticks</source>
        <translation type="obsolete">Graduations des axes</translation>
    </message>
    <message>
        <source>In</source>
        <translation type="obsolete">Au dessus de l&apos;axe</translation>
    </message>
    <message>
        <source>Out</source>
        <translation type="obsolete">Au dessous de l&apos;axe</translation>
    </message>
    <message>
        <source>Both</source>
        <translation type="obsolete">Au dessus et en dessous</translation>
    </message>
    <message>
        <source>Major ticks length</source>
        <translation type="obsolete">Longueur des graduations principales</translation>
    </message>
    <message>
        <source>Axes linewidth</source>
        <translation type="obsolete">Epaisseur des traits d&apos;axes</translation>
    </message>
    <message>
        <source>Minor ticks length</source>
        <translation type="obsolete">Longueur des graduations secondaires</translation>
    </message>
    <message>
        <source>General</source>
        <translation type="obsolete">Général</translation>
    </message>
    <message>
        <source>Style</source>
        <translation type="obsolete">Style</translation>
    </message>
    <message>
        <source>Choose &amp;font</source>
        <translation type="obsolete">Modifier</translation>
    </message>
    <message>
        <source>Save every</source>
        <translation type="obsolete">Sauvegarder toutes les</translation>
    </message>
    <message>
        <source>Default curve style</source>
        <translation type="obsolete">Style de courbe par défaut</translation>
    </message>
    <message>
        <source> Line</source>
        <translation type="obsolete"> Ligne</translation>
    </message>
    <message>
        <source> Scatter</source>
        <translation type="obsolete"> Nuage de points</translation>
    </message>
    <message>
        <source> Line + Symbol</source>
        <translation type="obsolete"> Ligne + Symbole</translation>
    </message>
    <message>
        <source> Vertical drop lines</source>
        <translation type="obsolete"> Epingles</translation>
    </message>
    <message>
        <source> Spline</source>
        <translation type="obsolete"> Spline</translation>
    </message>
    <message>
        <source> Vertical steps</source>
        <translation type="obsolete"> Marches verticales</translation>
    </message>
    <message>
        <source> Area</source>
        <translation type="obsolete"> Aire</translation>
    </message>
    <message>
        <source> Vertical Bars</source>
        <translation type="obsolete"> Barres Verticales</translation>
    </message>
    <message>
        <source> Horizontal Bars</source>
        <translation type="obsolete">Barres Horizontales</translation>
    </message>
    <message>
        <source>Line width</source>
        <translation type="obsolete">Epaisseur des lignes</translation>
    </message>
    <message>
        <source>Symbol size</source>
        <translation type="obsolete">Taille des symboles</translation>
    </message>
    <message>
        <source>QtiPlot - Choose default settings</source>
        <translation type="obsolete">Qtiplot - Choisissez les paramètres par défaut</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;Background</source>
        <translation type="obsolete">Modifier</translation>
    </message>
    <message>
        <source>&amp;Text Font</source>
        <translation type="obsolete">&amp;Texte</translation>
    </message>
    <message>
        <source>&amp;Labels Font</source>
        <translation type="obsolete">Etiquettes</translation>
    </message>
    <message>
        <source>A&amp;xes Legend</source>
        <translation type="obsolete">Etiquettes des A&amp;xes</translation>
    </message>
    <message>
        <source>Axes &amp;Numbers</source>
        <translation type="obsolete">Etiquettes des &amp;Graduations</translation>
    </message>
    <message>
        <source>&amp;Legend</source>
        <translation type="obsolete">&amp;Légende</translation>
    </message>
    <message>
        <source>T&amp;itle</source>
        <translation type="obsolete">T&amp;itre</translation>
    </message>
    <message>
        <source>&amp;Workspace</source>
        <translation type="obsolete">&amp;Modifier</translation>
    </message>
    <message>
        <source>Pa&amp;nels</source>
        <translation type="obsolete">Modifier</translation>
    </message>
    <message>
        <source>Panels Te&amp;xt</source>
        <translation type="obsolete">Modifier</translation>
    </message>
    <message>
        <source>&amp;Show Legend</source>
        <translation type="obsolete">Afficher la légende</translation>
    </message>
    <message>
        <source>Resolution</source>
        <translation type="obsolete">Résolution</translation>
    </message>
    <message>
        <source>Lab&amp;els</source>
        <translation type="obsolete">Modifier</translation>
    </message>
    <message>
        <source>Mesh &amp;Line</source>
        <translation type="obsolete">Ligne du maillage</translation>
    </message>
    <message>
        <source>&amp;Grid</source>
        <translation type="obsolete">&amp;Grille</translation>
    </message>
    <message>
        <source>Data &amp;Min</source>
        <translation type="obsolete">Minimum</translation>
    </message>
    <message>
        <source>&amp;Numbers</source>
        <translation type="obsolete">&amp;Nombre</translation>
    </message>
    <message>
        <source>&amp;Title</source>
        <translation type="obsolete">&amp;Titre</translation>
    </message>
    <message>
        <source>&amp;Axes Labels</source>
        <translation type="obsolete">Etiquette des &amp;Axes</translation>
    </message>
    <message>
        <source>Show &amp;Projection</source>
        <translation type="obsolete">Afficher la &amp;Projection</translation>
    </message>
    <message>
        <source>&amp;Data Max</source>
        <translation type="obsolete">&amp;Maximum</translation>
    </message>
    <message>
        <source>A&amp;xes</source>
        <translation type="obsolete">A&amp;xes</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">Arrière Plan</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">Texte</translation>
    </message>
    <message>
        <source>Labels</source>
        <translation type="obsolete">Etiquettes</translation>
    </message>
    <message>
        <source>Margin</source>
        <translation type="obsolete">Marge</translation>
    </message>
    <message>
        <source>Workspace</source>
        <translation type="obsolete">Fond</translation>
    </message>
    <message>
        <source>Panels</source>
        <translation type="obsolete">Panneaux</translation>
    </message>
    <message>
        <source>Panels text</source>
        <translation type="obsolete">Texte des Panneaux</translation>
    </message>
    <message>
        <source>Te&amp;xt</source>
        <translation type="obsolete">&amp;Modifier</translation>
    </message>
    <message>
        <source>Default Column Separator</source>
        <translation type="obsolete">Séparateur de colonnes par défaut</translation>
    </message>
    <message>
        <source>TAB</source>
        <translation type="obsolete">TAB</translation>
    </message>
    <message>
        <source>SPACE</source>
        <translation type="obsolete">ESPACE</translation>
    </message>
    <message>
        <source>;TAB</source>
        <translation type="obsolete">;TAB</translation>
    </message>
    <message>
        <source>,TAB</source>
        <translation type="obsolete">,TAB</translation>
    </message>
    <message>
        <source>;SPACE</source>
        <translation type="obsolete">;ESPACE</translation>
    </message>
    <message>
        <source>,SPACE</source>
        <translation type="obsolete">,ESPACE</translation>
    </message>
    <message>
        <source>;</source>
        <translation type="obsolete">;</translation>
    </message>
    <message>
        <source>,</source>
        <translation type="obsolete">,</translation>
    </message>
    <message>
        <source>Auto&amp;scaling</source>
        <translation type="obsolete">Echelle automatique</translation>
    </message>
    <message>
        <source>Scale &amp;Fonts</source>
        <translation type="obsolete">Taille de la Police</translation>
    </message>
    <message>
        <source>Show &amp;Title</source>
        <translation type="obsolete">Afficher le &amp;Titre</translation>
    </message>
    <message>
        <source>Sho&amp;w all axes</source>
        <translation type="obsolete">Afficher tous les axes</translation>
    </message>
    <message>
        <source>Canvas Fra&amp;me</source>
        <translation type="obsolete">Bordure du cadre</translation>
    </message>
    <message>
        <source>Axes &amp;backbones</source>
        <translation type="obsolete">Abscisses / Ordonnées</translation>
    </message>
    <message>
        <source>Do not &amp;resize layers when window size changes</source>
        <translation type="obsolete">Ne pas &amp;redimensionner les planches lorsque la taille de la fenêtre change</translation>
    </message>
    <message>
        <source>(all data shown)</source>
        <translation type="obsolete">(Toutes les données)</translation>
    </message>
    <message>
        <source>Smooth Mes&amp;h</source>
        <translation type="obsolete">Maillage lissé</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Folders</source>
        <translation type="obsolete">Dossier</translation>
    </message>
    <message>
        <source>&amp;Notes</source>
        <translation type="obsolete">Commentai&amp;res</translation>
    </message>
    <message>
        <source>Language</source>
        <translation type="obsolete">Langue</translation>
    </message>
    <message>
        <source> minutes</source>
        <translation type="obsolete">minutes</translation>
    </message>
    <message>
        <source>Smoot&amp;h Line</source>
        <translation type="obsolete">Affinée</translation>
    </message>
    <message>
        <source>QtiPlot - Import options error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;importation des données</translation>
    </message>
    <message>
        <source>The separator must not contain the following characters: 0-9eE.+-</source>
        <translation type="obsolete">Le séparateur ne doit pas contenir un des caractères suivant : 0-9eE.+-</translation>
    </message>
    <message>
        <source>Curves</source>
        <translation type="obsolete">Courbes</translation>
    </message>
    <message>
        <source>Length</source>
        <translation type="obsolete">Longueur</translation>
    </message>
    <message>
        <source>Major Ticks</source>
        <translation type="obsolete">Graduations Principales</translation>
    </message>
    <message>
        <source>Minor Ticks</source>
        <translation type="obsolete">Graduations Secondaires</translation>
    </message>
    <message>
        <source>Draw axes &amp;backbone</source>
        <translation type="obsolete">Axes visibles</translation>
    </message>
    <message>
        <source>Scale &amp;fonts on resize</source>
        <translation type="obsolete">Mise à l&apos;échelle des polices lors du redimensionnement</translation>
    </message>
    <message>
        <source>Auto&amp;scale axes</source>
        <translation type="obsolete">Echelle automatique des axes</translation>
    </message>
    <message>
        <source>In &amp; Out</source>
        <translation type="obsolete">Au dessus et en dessous</translation>
    </message>
    <message>
        <source>Check for new versions at startup</source>
        <translation type="obsolete">Vérifier les nouvelles versions au démarrage</translation>
    </message>
    <message>
        <source>Generated Fit Curve</source>
        <translation type="obsolete">Création de l&apos;ajustement de la courbe</translation>
    </message>
    <message>
        <source>Uniform X Function</source>
        <translation type="obsolete">Fonction X uniforme</translation>
    </message>
    <message>
        <source>Points</source>
        <translation type="obsolete">Points</translation>
    </message>
    <message>
        <source>Same X as Fitting Data</source>
        <translation type="obsolete">Même X que les données d&apos;ajustement</translation>
    </message>
    <message>
        <source>Display Peak Curves for Multi-peak Fits</source>
        <translation type="obsolete">Afficher les pics de la courbe pour l&apos;ajustement multi-pics</translation>
    </message>
    <message>
        <source>Peaks Color</source>
        <translation type="obsolete">Couleur des pics</translation>
    </message>
    <message>
        <source>Parameters Output</source>
        <translation type="obsolete">Paramètre de sortie</translation>
    </message>
    <message>
        <source>Significant Digits</source>
        <translation type="obsolete">Fixées à </translation>
    </message>
    <message>
        <source>Write Parameters to Result Log</source>
        <translation type="obsolete">Ecrire les paramètres sur la fenêtre de résultats</translation>
    </message>
    <message>
        <source>Paste Parameters to Plot</source>
        <translation type="obsolete">Copier les paramètres vers la courbe</translation>
    </message>
    <message>
        <source>Fitting</source>
        <translation type="obsolete">Ajustement</translation>
    </message>
    <message>
        <source>Default scripting language</source>
        <translation type="obsolete">Langage de script</translation>
    </message>
    <message>
        <source>Scale Errors with sqrt(Chi^2/doF)</source>
        <translation type="obsolete">Échelle d&apos;erreurs avec sqrt(Chi^2/doF)</translation>
    </message>
    <message>
        <source> Horizontal steps</source>
        <translation type="obsolete"> Marches horizontales</translation>
    </message>
    <message>
        <source>O&amp;rthogonal</source>
        <translation type="obsolete">O&amp;rthogonal</translation>
    </message>
</context>
<context>
    <name>curvesDialog</name>
    <message>
        <source>QtiPlot - Add/Remove curves</source>
        <translation type="obsolete">Qtiplot - Ajouter/Enlever des courbes</translation>
    </message>
    <message>
        <source> Line</source>
        <translation type="obsolete"> Ligne</translation>
    </message>
    <message>
        <source> Scatter</source>
        <translation type="obsolete"> Nuage de points</translation>
    </message>
    <message>
        <source> Line + Symbol</source>
        <translation type="obsolete"> Ligne + Symbole</translation>
    </message>
    <message>
        <source> Vertical drop lines</source>
        <translation type="obsolete"> Epingles</translation>
    </message>
    <message>
        <source> Spline</source>
        <translation type="obsolete"> Spline</translation>
    </message>
    <message>
        <source> Vertical steps</source>
        <translation type="obsolete"> Marches verticales</translation>
    </message>
    <message>
        <source> Area</source>
        <translation type="obsolete"> Zones</translation>
    </message>
    <message>
        <source> Vertical Bars</source>
        <translation type="obsolete"> Barres Verticales</translation>
    </message>
    <message>
        <source> Horizontal Bars</source>
        <translation type="obsolete"> Barres Horizontales</translation>
    </message>
    <message>
        <source>Available data</source>
        <translation type="obsolete">Données disponibles</translation>
    </message>
    <message>
        <source>Graph contents</source>
        <translation type="obsolete">Contenu</translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="obsolete">OK</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Annule</translation>
    </message>
    <message>
        <source>Plot Associations...</source>
        <translation type="obsolete">Associations de graphiques...</translation>
    </message>
    <message>
        <source>&amp;Plot Associations...</source>
        <translation type="obsolete">&amp;Matrice de Graphes...</translation>
    </message>
    <message>
        <source>&amp;Edit Function...</source>
        <translation type="obsolete">Modifi&amp;er la fonction...</translation>
    </message>
    <message>
        <source>Close</source>
        <translation type="obsolete">Fermer</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">Supprimer</translation>
    </message>
    <message>
        <source>&amp;Plot</source>
        <translation type="obsolete">Courbe</translation>
    </message>
    <message>
        <source> Horizontal steps</source>
        <translation type="obsolete"> Marches horizontales</translation>
    </message>
</context>
<context>
    <name>epsExportDialog</name>
    <message>
        <source>Orientation</source>
        <translation type="obsolete">Orientation</translation>
    </message>
    <message>
        <source>Page Size</source>
        <translation type="obsolete">Format de la Page</translation>
    </message>
    <message>
        <source>Resolution</source>
        <translation type="obsolete">Résolution</translation>
    </message>
    <message>
        <source>&amp;Print in color if available</source>
        <translation type="obsolete">Im&amp;primer en couleur si c&apos;est possible</translation>
    </message>
    <message>
        <source>QtiPlot - EPS Export options</source>
        <translation type="obsolete">QtiPlot - Options pour l&apos;exportation en EPS</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Landscape</source>
        <translation type="obsolete">Paysage</translation>
    </message>
    <message>
        <source>Portrait</source>
        <translation type="obsolete">Portrait</translation>
    </message>
    <message>
        <source>Warning: Windows users need a default post-script printer enabled!</source>
        <translation type="obsolete">Avertissement : Les utilisateurs sous Windows ont besoin d&apos;avoir une imprimante Postscript !</translation>
    </message>
</context>
<context>
    <name>errDialog</name>
    <message>
        <source>QtiPlot - Error Bars</source>
        <translation type="obsolete">Qtiplot - Barres d&apos;erreurs</translation>
    </message>
    <message>
        <source>&amp;X Error Bars</source>
        <translation type="obsolete">Barres d&apos;erreurs en &amp;abscisses</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>Add Error Bars to</source>
        <translation type="obsolete">Ajouter des barres d&apos;erreurs à</translation>
    </message>
    <message>
        <source>Source of errors</source>
        <translation type="obsolete">Origine des erreurs</translation>
    </message>
    <message>
        <source>Percent of data (%)</source>
        <translation type="obsolete">Pourcentage sur les données (%)</translation>
    </message>
    <message>
        <source>5</source>
        <translation type="obsolete">5</translation>
    </message>
    <message>
        <source>Standard Deviation of Data</source>
        <translation type="obsolete">Ecart-Type des données</translation>
    </message>
    <message>
        <source>&amp;Y Error Bars</source>
        <translation type="obsolete">Barres d&apos;erreurs en &amp;ordonnées</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>&amp;Add</source>
        <translation type="obsolete">&amp;Ajouter</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">Fermer</translation>
    </message>
</context>
<context>
    <name>expDecayDialog</name>
    <message>
        <source>QtiPlot - Verify initial guesses</source>
        <translation type="obsolete">Qtiplot - Vérifier les paramètres initiaux</translation>
    </message>
    <message>
        <source>Damping</source>
        <translation type="obsolete">Atténuation</translation>
    </message>
    <message>
        <source>First decay time (t1)</source>
        <translation type="obsolete">Première constante de temps (t1)</translation>
    </message>
    <message>
        <source>1</source>
        <translation type="obsolete">1</translation>
    </message>
    <message>
        <source>Second decay time (t2)</source>
        <translation type="obsolete">Deuxième constante de temps (t2)</translation>
    </message>
    <message>
        <source>Third decay time (t3)</source>
        <translation type="obsolete">Troisième constante de temps (t3)</translation>
    </message>
    <message>
        <source>Amplitude</source>
        <translation type="obsolete">Amplitude</translation>
    </message>
    <message>
        <source>Initial time</source>
        <translation type="obsolete">Temps initial</translation>
    </message>
    <message>
        <source>0</source>
        <translation type="obsolete">0</translation>
    </message>
    <message>
        <source>Y Offset</source>
        <translation type="obsolete">Décalage en Y</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Exponential Fit of</source>
        <translation type="obsolete">Ajustement de</translation>
    </message>
    <message>
        <source>Growth time</source>
        <translation type="obsolete">Durée d&apos;accroissement</translation>
    </message>
    <message>
        <source>&amp;Fit</source>
        <translation type="obsolete">&amp;Calculer</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="obsolete">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Fermer</translation>
    </message>
</context>
<context>
    <name>exportDialog</name>
    <message>
        <source>Separator</source>
        <translation type="obsolete">Séparateur</translation>
    </message>
    <message>
        <source>QtiPlot - Export ASCII</source>
        <translation type="obsolete">Qtiplot - Exporter en texte ASCII</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>TAB</source>
        <translation type="obsolete">Tabulation</translation>
    </message>
    <message>
        <source>SPACE</source>
        <translation type="obsolete">Espace</translation>
    </message>
    <message>
        <source>,TAB</source>
        <translation type="obsolete">,Tabulation</translation>
    </message>
    <message>
        <source>;TAB</source>
        <translation type="obsolete">;Tabulation</translation>
    </message>
    <message>
        <source>,SPACE</source>
        <translation type="obsolete">,Espace</translation>
    </message>
    <message>
        <source>;SPACE</source>
        <translation type="obsolete">;Espace</translation>
    </message>
    <message>
        <source>;</source>
        <translation type="obsolete">;</translation>
    </message>
    <message>
        <source>,</source>
        <translation type="obsolete">,</translation>
    </message>
    <message>
        <source>Table</source>
        <translation type="obsolete">Table</translation>
    </message>
    <message>
        <source>Include Column &amp;Names</source>
        <translation type="obsolete">Insérer les &amp;Noms des Colonnes</translation>
    </message>
    <message>
        <source>Export &amp;Selection</source>
        <translation type="obsolete">Exporter la &amp;Sélection</translation>
    </message>
    <message>
        <source>&amp;All</source>
        <translation type="obsolete">&amp;Tout</translation>
    </message>
    <message>
        <source>QtiPlot - Import options error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;importation des données</translation>
    </message>
    <message>
        <source>The separator must not contain the following characters: 0-9eE.+-</source>
        <translation type="obsolete">Le séparateur ne doit pas contenir un des caractères suivant : 0-9eE.+-</translation>
    </message>
    <message>
        <source>The column separator can be customized. The following special codes can be used:
\t for a TAB character 
\s for a SPACE</source>
        <translation type="obsolete">Le séparateur de colonne peut être personnalisé. Les codes spéciaux suivant peuvent être utilisés :
\t pour une tabulation
\s pour une espace</translation>
    </message>
    <message>
        <source>QtiPlot - Help</source>
        <translation type="obsolete">QtiPlot - Aide</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="obsolete">Aide</translation>
    </message>
</context>
<context>
    <name>fDialog</name>
    <message>
        <source>QtiPlot - Start limit error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite de départ</translation>
    </message>
    <message>
        <source>QtiPlot - End limit error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite d&apos;arrêt</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée</translation>
    </message>
    <message>
        <source>Please enter x limits that satisfy: from &lt; end!</source>
        <translation type="obsolete">Donnez des limites en abscisses dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <source>QtiPlot - Input function error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée de la fonction</translation>
    </message>
    <message>
        <source>Please enter parameter limits that satisfy: from &lt; end!</source>
        <translation type="obsolete">Donnez des valeurs du paramètre dans l&apos;ordre croissant !</translation>
    </message>
</context>
<context>
    <name>filterDialog</name>
    <message>
        <source>Filter curve: </source>
        <translation type="obsolete">Filtrer : </translation>
    </message>
    <message>
        <source>Frequency cutoff (Hz)</source>
        <translation type="obsolete">Fréquence de coupure (Hz)</translation>
    </message>
    <message>
        <source>Low Frequency (Hz)</source>
        <translation type="obsolete">Fréquence de coupure basse (Hz)</translation>
    </message>
    <message>
        <source>0</source>
        <translation type="obsolete">0</translation>
    </message>
    <message>
        <source>High Frequency (Hz)</source>
        <translation type="obsolete">Fréquence de coupure haute (Hz)</translation>
    </message>
    <message>
        <source>Add DC Offset</source>
        <translation type="obsolete">Tenir compte de la composante continue</translation>
    </message>
    <message>
        <source>Substract DC Offset</source>
        <translation type="obsolete">Supprimer la composante continue</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>QtiPlot - Filter options</source>
        <translation type="obsolete">QtiPlot - Options du filtre</translation>
    </message>
    <message>
        <source>&amp;Filter</source>
        <translation type="obsolete">&amp;Calculer</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Fermer</translation>
    </message>
    <message>
        <source>QtiPlot - Frequency input error</source>
        <translation type="obsolete">QtiPlot - Erreur de la fréquence d&apos;entrée</translation>
    </message>
    <message>
        <source>Please enter positive frequency values!</source>
        <translation type="obsolete">Donnez des valeurs de fréquences positives !</translation>
    </message>
    <message>
        <source>QtiPlot - High Frequency input error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite de départ</translation>
    </message>
    <message>
        <source>Please enter frequency limits that satisfy: Low &lt; High !</source>
        <translation type="obsolete">Donnez des limites de fréquences dans l&apos;ordre croissant !</translation>
    </message>
</context>
<context>
    <name>findDialog</name>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <source>Find</source>
        <translation type="obsolete">Chercher</translation>
    </message>
    <message>
        <source>Start From</source>
        <translation type="obsolete">A partir de </translation>
    </message>
    <message>
        <source>Search In</source>
        <translation type="obsolete">Chercher dans</translation>
    </message>
    <message>
        <source>&amp;Window Names</source>
        <translation type="obsolete">Noms des fenêtres</translation>
    </message>
    <message>
        <source>Window &amp;Labels</source>
        <translation type="obsolete">&amp;Labels des fenêtres</translation>
    </message>
    <message>
        <source>Folder &amp;Names</source>
        <translation type="obsolete">Noms de dossiers</translation>
    </message>
    <message>
        <source>Case &amp;Sensitive</source>
        <translation type="obsolete">Respecter la casse</translation>
    </message>
    <message>
        <source>&amp;Partial Match Allowed</source>
        <translation type="obsolete">Correspondance &amp;partielle autorisée</translation>
    </message>
    <message>
        <source>&amp;Include Subfolders</source>
        <translation type="obsolete">&amp;Inclure les sous-dossiers</translation>
    </message>
    <message>
        <source>&amp;Find</source>
        <translation type="obsolete">Chercher</translation>
    </message>
    <message>
        <source>&amp;Reset Start From</source>
        <translation type="obsolete">Recommencer</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">Fermer</translation>
    </message>
</context>
<context>
    <name>fitDialog</name>
    <message>
        <source>QtiPlot - Non-linear curve fit</source>
        <translation type="obsolete">Qtiplot - Ajustement �une fonction non linéaire</translation>
    </message>
    <message>
        <source>Curve</source>
        <translation type="obsolete">Courbe</translation>
    </message>
    <message>
        <source>Function</source>
        <translation type="obsolete">Fonction</translation>
    </message>
    <message>
        <source>Initial guesses</source>
        <translation type="obsolete">Estimation initiale des paramètres</translation>
    </message>
    <message>
        <source>From x=</source>
        <translation type="obsolete">De x = </translation>
    </message>
    <message>
        <source>To x=</source>
        <translation type="obsolete">à x = </translation>
    </message>
    <message>
        <source>Iterations</source>
        <translation type="obsolete">Nombre d&apos;itérations</translation>
    </message>
    <message>
        <source>Tolerance</source>
        <translation type="obsolete">Tolérance</translation>
    </message>
    <message>
        <source>Algorithm</source>
        <translation type="obsolete">Algorithme</translation>
    </message>
    <message>
        <source>&amp;Fit</source>
        <translation type="obsolete">&amp;Calculer</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Type:</source>
        <translation type="obsolete">Type :</translation>
    </message>
    <message>
        <source>Scaled Levenberg-Marquardt</source>
        <translation type="obsolete">Levenberg-Marquardt Normalisé</translation>
    </message>
    <message>
        <source>Unscaled Levenberg-Marquardt</source>
        <translation type="obsolete">Levenberg-Marquardt</translation>
    </message>
    <message>
        <source>&lt;&lt; &amp;Edit function</source>
        <translation type="obsolete">&lt;&lt; Modifi&amp;er la fonction</translation>
    </message>
    <message>
        <source>Category</source>
        <translation type="obsolete">Catégorie</translation>
    </message>
    <message>
        <source>User defined</source>
        <translation type="obsolete">Définie par l&apos;utilisateur</translation>
    </message>
    <message>
        <source>Built-in</source>
        <translation type="obsolete">Interne</translation>
    </message>
    <message>
        <source>Basic</source>
        <translation type="obsolete">Basique</translation>
    </message>
    <message>
        <source>Expresion</source>
        <translation type="obsolete">Expression</translation>
    </message>
    <message>
        <source>Fit with &amp;built-in function</source>
        <translation type="obsolete">Ajuster avec une fonction interne</translation>
    </message>
    <message>
        <source>Name</source>
        <translation type="obsolete">Nom</translation>
    </message>
    <message>
        <source>&amp;Save</source>
        <translation type="obsolete">&amp;Sauvegarder</translation>
    </message>
    <message>
        <source>Parameters</source>
        <translation type="obsolete">Paramètres</translation>
    </message>
    <message>
        <source>&amp;Remove</source>
        <translation type="obsolete">Supprimer</translation>
    </message>
    <message>
        <source>Add &amp;expresion</source>
        <translation type="obsolete">Ajouter une &amp;expression</translation>
    </message>
    <message>
        <source>Add &amp;name</source>
        <translation type="obsolete">Ajouter un &amp;nom</translation>
    </message>
    <message>
        <source>Clear user &amp;list</source>
        <translation type="obsolete">Supprimer la &amp;liste utilisateur</translation>
    </message>
    <message>
        <source>&amp;Fit &gt;&gt;</source>
        <translation type="obsolete">Ajuster &gt;&gt;</translation>
    </message>
    <message>
        <source>QtiPlot - Input function error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée de la fonction</translation>
    </message>
    <message>
        <source>Please enter a valid function!</source>
        <translation type="obsolete">Veuillez entrer une fonction valide !</translation>
    </message>
    <message>
        <source>Please enter a function name!</source>
        <translation type="obsolete">Veuillez entrer un nom de fonction !</translation>
    </message>
    <message>
        <source>Please enter at least one parameter name!</source>
        <translation type="obsolete">Veuillez entrer au moins un nom de paramètre !</translation>
    </message>
    <message>
        <source>You can&apos;t define functions recursevely!</source>
        <translation type="obsolete">Vous en pouvez pas définir de fonctions récursives !</translation>
    </message>
    <message>
        <source>Built-in function: 
the order of the parameters matters!</source>
        <translation type="obsolete">Fonctions internes :
respectez l&apos;ordre des paramètres !</translation>
    </message>
    <message>
        <source>User defined function</source>
        <translation type="obsolete">Fonction définie par l&apos;utilisateur</translation>
    </message>
    <message>
        <source>Please verify that you have initialized all the parameters!</source>
        <translation type="obsolete">Veuillez vérifier que vous avez inititialisé tous les paramètres !</translation>
    </message>
    <message>
        <source>QtiPlot - Error: function name</source>
        <translation type="obsolete">Qtiplot - Erreur : fonction non reconnue</translation>
    </message>
    <message>
        <source> is a built-in function name&lt;p&gt;You must choose another name for your function!</source>
        <translation type="obsolete"> est un nom de fonction interne&lt;p&gt;Veuillez choisir un autre nom pour votre fonction !</translation>
    </message>
    <message>
        <source>Please use exactly one &apos;=&apos; symbol!</source>
        <translation type="obsolete">Veuillez utiliser seulement un signe &apos;=&apos; !</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;entrée des paramètres</translation>
    </message>
    <message>
        <source>Please enter initial guesses for your parameters!</source>
        <translation type="obsolete">Veuillez entrer des valeurs initiales pour la recherche des paramètres !</translation>
    </message>
    <message>
        <source>QtiPlot - Start limit error</source>
        <translation type="obsolete">QtiPlot - Erreur sur la limite inférieure</translation>
    </message>
    <message>
        <source>QtiPlot - End limit error</source>
        <translation type="obsolete">QtiPlot - Erreur sur la limite supérieure</translation>
    </message>
    <message>
        <source>Please enter x limits that satisfy: from &lt; end!</source>
        <translation type="obsolete">Donnez des limites en abscisses dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <source>QtiPlot - Tolerance input error</source>
        <translation type="obsolete">QtiPlot - Erreur sur la valeur de la tolérance</translation>
    </message>
    <message>
        <source>The tolerance value must be positive and less than 1!</source>
        <translation type="obsolete">La tolérance doit être un  nombre compris entre 0 et 1 !</translation>
    </message>
    <message>
        <source>Plugins</source>
        <translation type="obsolete">Extensions</translation>
    </message>
    <message>
        <source>&amp;Choose plugins folder...</source>
        <translation type="obsolete">&amp;Choisir le répertoire pour les extensions...</translation>
    </message>
    <message>
        <source>Fit using &amp;built-in function</source>
        <translation type="obsolete">Ajuster par une fonction &amp;interne</translation>
    </message>
    <message>
        <source>Fit using &amp;plugin function</source>
        <translation type="obsolete">Ajuster par une fonction &amp;externe</translation>
    </message>
    <message>
        <source>Choose the plugins folder</source>
        <translation type="obsolete">Choisir le répertoire pour les extensions</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="obsolete">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>Fit with selected &amp;user function</source>
        <translation type="obsolete">Aj&amp;uster par une fonction définie par l&apos;utilisateur</translation>
    </message>
    <message>
        <source>Parameter</source>
        <translation type="obsolete">Paramètre</translation>
    </message>
    <message>
        <source>Value</source>
        <translation type="obsolete">Valeur</translation>
    </message>
    <message>
        <source>Nelder-Mead Simplex</source>
        <translation type="obsolete">Simplex Nelder-Mead</translation>
    </message>
    <message>
        <source>&amp;Delete Fit Curves</source>
        <translation type="obsolete">Supprimer les courbes ajustées</translation>
    </message>
    <message>
        <source>Constant</source>
        <translation type="obsolete">Constante</translation>
    </message>
    <message>
        <source>Expression</source>
        <translation type="obsolete">Expression</translation>
    </message>
    <message>
        <source>Add &amp;expression</source>
        <translation type="obsolete">Ajouter une expression</translation>
    </message>
    <message>
        <source>Weighting Method</source>
        <translation type="obsolete">Méthode de pondération</translation>
    </message>
    <message>
        <source>No weighting</source>
        <translation type="obsolete">Aucune pondération</translation>
    </message>
    <message>
        <source>Instrumental</source>
        <translation type="obsolete">Instrumentale</translation>
    </message>
    <message>
        <source>Statistical</source>
        <translation type="obsolete">Statistique</translation>
    </message>
    <message>
        <source>Arbitrary Dataset</source>
        <translation type="obsolete">Données aléatoires</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">&amp;Fermer</translation>
    </message>
    <message>
        <source>Custom &amp;Output &gt;&gt;</source>
        <translation type="obsolete">Sortie personnalisée &gt;&gt;</translation>
    </message>
    <message>
        <source>Polynomial Order</source>
        <translation type="obsolete">Ordre</translation>
    </message>
    <message>
        <source>Generated Fit Curve</source>
        <translation type="obsolete">Création de l&apos;ajustement de la courbe</translation>
    </message>
    <message>
        <source>Uniform X Function</source>
        <translation type="obsolete">Fonction X uniforme</translation>
    </message>
    <message>
        <source>Points</source>
        <translation type="obsolete">Points</translation>
    </message>
    <message>
        <source>Same X as Fitting Data</source>
        <translation type="obsolete">Même X que les données d&apos;ajustement</translation>
    </message>
    <message>
        <source>Parameters Output</source>
        <translation type="obsolete">Paramètre de sortie</translation>
    </message>
    <message>
        <source>Significant Digits</source>
        <translation type="obsolete">Fixées à </translation>
    </message>
    <message>
        <source>Parameters Table</source>
        <translation type="obsolete">Paramètres de la table</translation>
    </message>
    <message>
        <source>Name: </source>
        <translation type="obsolete">Nom : </translation>
    </message>
    <message>
        <source>Covariance Matrix</source>
        <translation type="obsolete">Matrice de co-variance</translation>
    </message>
    <message>
        <source>CovMatrix</source>
        <translation type="obsolete">CovMatrix</translation>
    </message>
    <message>
        <source>Write Parameters to Result Log</source>
        <translation type="obsolete">Ecrire les paramètres sur la fenêtre de résultats</translation>
    </message>
    <message>
        <source>Paste Parameters to Plot</source>
        <translation type="obsolete">Copier les paramètres vers la courbe</translation>
    </message>
    <message>
        <source>&lt;&lt; &amp;Fit</source>
        <translation type="obsolete">&lt;&lt; &amp;Ajuster</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <source>Please enter a valid name for the parameters table.</source>
        <translation type="obsolete">Veuillez donner un nom valide pour les paramètres de la table.</translation>
    </message>
    <message>
        <source>Please perform a fit first and try again.</source>
        <translation type="obsolete">Veuillez faire un ajustement et essayer de nouveau.</translation>
    </message>
    <message>
        <source>Error</source>
        <translation type="obsolete">Erreur</translation>
    </message>
    <message>
        <source>Please enter a valid name for the covariance matrix.</source>
        <translation type="obsolete">Veuillez donner un nom valide pour la matrice de co-variance.</translation>
    </message>
    <message>
        <source>Gauss</source>
        <translation type="obsolete">Gauss</translation>
    </message>
    <message>
        <source>Peaks</source>
        <translation type="obsolete">Pics</translation>
    </message>
    <message>
        <source>Lorentz</source>
        <translation type="obsolete">Lorentz</translation>
    </message>
    <message>
        <source>Polynomial</source>
        <translation type="obsolete">Polynomial</translation>
    </message>
    <message>
        <source>MultiPeak</source>
        <translation type="obsolete">Multi-pics</translation>
    </message>
    <message>
        <source>Scale Errors with sqrt(Chi^2/doF)</source>
        <translation type="obsolete">Échelle d&apos;erreurs avec sqrt(Chi^2/doF)</translation>
    </message>
</context>
<context>
    <name>functionDialogui</name>
    <message>
        <source>QtiPlot - Add function curve</source>
        <translation type="obsolete">Qtiplot - Ajouter une courbe de fonction</translation>
    </message>
    <message>
        <source>Curve type </source>
        <translation type="obsolete">Type de courbe </translation>
    </message>
    <message>
        <source>f(x)= </source>
        <translation type="obsolete">f(x) = </translation>
    </message>
    <message>
        <source>From x= </source>
        <translation type="obsolete">De x =  </translation>
    </message>
    <message>
        <source>To x= </source>
        <translation type="obsolete">à x = </translation>
    </message>
    <message>
        <source>Points</source>
        <translation type="obsolete">Nombre de points</translation>
    </message>
    <message>
        <source>Clear list</source>
        <translation type="obsolete">Effacer la liste</translation>
    </message>
    <message>
        <source>Parameter</source>
        <translation type="obsolete">Paramètre</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>y = </source>
        <translation type="obsolete">y = </translation>
    </message>
    <message>
        <source>x = </source>
        <translation type="obsolete">x = </translation>
    </message>
    <message>
        <source>From</source>
        <translation type="obsolete">De</translation>
    </message>
    <message>
        <source>R =</source>
        <translation type="obsolete">R = </translation>
    </message>
    <message>
        <source>Theta =</source>
        <translation type="obsolete">Theta = </translation>
    </message>
    <message>
        <source>Function</source>
        <translation type="obsolete">Fonction y = f(x)</translation>
    </message>
    <message>
        <source>Parametric plot</source>
        <translation type="obsolete">Courbe paramétrée</translation>
    </message>
    <message>
        <source>Polar plot</source>
        <translation type="obsolete">Courbe polaire</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Annuler</translation>
    </message>
    <message>
        <source>Ok</source>
        <translation type="obsolete">OK</translation>
    </message>
</context>
<context>
    <name>future::Folder</name>
    <message>
        <location filename="../src/future/core/future_Folder.cpp" line="113"/>
        <source>unknown element &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/future_Folder.cpp" line="120"/>
        <source>no folder element found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/future_Folder.cpp" line="135"/>
        <source>Folder %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/future_Folder.cpp" line="146"/>
        <source>Column %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/future_Folder.cpp" line="171"/>
        <source>creation of aspect from element &apos;%1&apos; failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/core/future_Folder.cpp" line="179"/>
        <source>no plugin to load element &apos;%1&apos; found</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>future::Matrix</name>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="208"/>
        <source>%1: cut selected cell(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="255"/>
        <source>%1: paste from clipboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="442"/>
        <source>%1: clear selected cell(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="535"/>
        <source>Cu&amp;t</source>
        <translation type="unfinished">Co&amp;uper</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="538"/>
        <source>&amp;Copy</source>
        <translation type="unfinished">&amp;Copier</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="541"/>
        <source>Past&amp;e</source>
        <translation type="unfinished">C&amp;oller</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="547"/>
        <source>Clea&amp;r</source>
        <comment>clear selection</comment>
        <translation type="unfinished">Efface&amp;r</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="555"/>
        <source>Assign &amp;Formula</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="563"/>
        <source>Recalculate</source>
        <translation type="unfinished">Recalculer</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="579"/>
        <source>Select All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="586"/>
        <source>Clear Matrix</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="593"/>
        <source>&amp;Go to Cell</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="613"/>
        <source>&amp;Dimensions</source>
        <comment>matrix size</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="616"/>
        <source>Set &amp;Coordinates</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="619"/>
        <source>Set Display &amp;Format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="626"/>
        <source>&amp;Insert Empty Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="633"/>
        <source>Remo&amp;ve Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="640"/>
        <source>Clea&amp;r Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="647"/>
        <source>&amp;Add Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="655"/>
        <source>&amp;Insert Empty Rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="662"/>
        <source>Remo&amp;ve Rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="669"/>
        <source>Clea&amp;r Rows</source>
        <translation type="unfinished">Effacer les rangées</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="676"/>
        <source>&amp;Add Rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="749"/>
        <source>&amp;Matrix</source>
        <translation type="unfinished">&amp;Matrice</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="815"/>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="819"/>
        <source>Go to Cell</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="815"/>
        <source>Enter column</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="819"/>
        <source>Enter row</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="887"/>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="891"/>
        <source>Set Matrix Dimensions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="887"/>
        <source>Enter number of columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="891"/>
        <source>Enter number of rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1142"/>
        <source>invalid row or column count</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1174"/>
        <source>unknown element &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1183"/>
        <source>no matrix element found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1196"/>
        <source>invalid or missing numeric format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1205"/>
        <source>invalid or missing number of displayed digits</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1224"/>
        <source>invalid x start value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1232"/>
        <source>invalid x end value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1240"/>
        <source>invalid y start value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1248"/>
        <source>invalid y end value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1271"/>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1324"/>
        <source>invalid or missing row index</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1278"/>
        <source>invalid row height</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1295"/>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1330"/>
        <source>invalid or missing column index</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1302"/>
        <source>invalid column width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1338"/>
        <source>invalid cell value</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1369"/>
        <source>Hide Controls</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1371"/>
        <source>Show Controls</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1448"/>
        <source>Matrix</source>
        <translation type="unfinished">Matrice</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="556"/>
        <source>Alt+Q</source>
        <translation type="unfinished">Alt+Q</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="564"/>
        <source>Ctrl+Return</source>
        <translation type="unfinished">Ctrl+Entrée</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="572"/>
        <source>F12</source>
        <translation type="unfinished">F12</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="594"/>
        <source>Ctrl+Alt+G</source>
        <translation type="unfinished">Ctrl+Alt+G</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="598"/>
        <source>&amp;Transpose</source>
        <translation type="unfinished">&amp;Transposer</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="601"/>
        <source>Mirror &amp;Horizontally</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="604"/>
        <source>Mirror &amp;Vertically</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="607"/>
        <source>&amp;Import Image</source>
        <comment>import image as matrix</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="610"/>
        <source>&amp;Duplicate</source>
        <comment>duplicate matrix</comment>
        <translation type="unfinished">&amp;Dupliquer</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="901"/>
        <source>Images</source>
        <translation type="unfinished">Images</translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="909"/>
        <source>Import image from file</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="925"/>
        <source>Error importing image</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="925"/>
        <source>Import of image &apos;%1&apos; failed</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1424"/>
        <source>%1: apply formula to selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1460"/>
        <source>SciDAVis</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1460"/>
        <source>Import image...</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/matrix/future_Matrix.cpp" line="1463"/>
        <source>Matrix %1</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>future::SortDialog</name>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="44"/>
        <source>Sorting Options</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="52"/>
        <source>Sort columns</source>
        <translation type="unfinished">Trier les Colonnes</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="54"/>
        <source>Separately</source>
        <translation type="unfinished">Séparement</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="55"/>
        <source>Together</source>
        <translation type="unfinished">Ensemble</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="59"/>
        <source>Order</source>
        <translation type="unfinished">Ordre</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="61"/>
        <source>Ascending</source>
        <translation type="unfinished">&amp;Croissant</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="62"/>
        <source>Descending</source>
        <translation type="unfinished">&amp;Décroissant</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="65"/>
        <source>Leading column</source>
        <translation type="unfinished">Colonne triée</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="70"/>
        <source>&amp;Sort</source>
        <translation type="unfinished">&amp;Trier</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_SortDialog.cpp" line="74"/>
        <source>&amp;Close</source>
        <translation type="unfinished"></translation>
    </message>
</context>
<context>
    <name>future::Table</name>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="350"/>
        <source>%1: cut selected cell(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="412"/>
        <source>%1: paste from clipboard</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="502"/>
        <source>%1: mask selected cell(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="522"/>
        <source>%1: unmask selected cell(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="546"/>
        <source>%1: apply formula to selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="562"/>
        <source>%1: fill cells with row numbers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="603"/>
        <source>%1: fill cells with random values</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="959"/>
        <source>&amp;Table</source>
        <translation type="unfinished">&amp;Table</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="961"/>
        <location filename="../src/future/table/future_Table.cpp" line="1478"/>
        <source>S&amp;et Column(s) As</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="973"/>
        <location filename="../src/future/table/future_Table.cpp" line="1446"/>
        <location filename="../src/future/table/future_Table.cpp" line="1490"/>
        <location filename="../src/future/table/future_Table.cpp" line="1553"/>
        <source>Fi&amp;ll Selection with</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1042"/>
        <source>Cu&amp;t</source>
        <translation type="unfinished">Co&amp;uper</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1045"/>
        <source>&amp;Copy</source>
        <translation type="unfinished">&amp;Copier</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1048"/>
        <source>Past&amp;e</source>
        <translation type="unfinished">C&amp;oller</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1052"/>
        <source>&amp;Mask</source>
        <comment>mask selection</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1055"/>
        <source>&amp;Unmask</source>
        <comment>unmask selection</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1062"/>
        <source>Assign &amp;Formula</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1063"/>
        <source>Alt+Q</source>
        <translation type="unfinished">Alt+Q</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1070"/>
        <source>Clea&amp;r</source>
        <comment>clear selection</comment>
        <translation type="unfinished">Efface&amp;r</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1077"/>
        <source>Recalculate</source>
        <translation type="unfinished">Recalculer</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1078"/>
        <source>Ctrl+Return</source>
        <translation type="unfinished">Ctrl+Entrée</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1082"/>
        <source>Row Numbers</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1085"/>
        <source>Random Values</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1100"/>
        <source>F12</source>
        <translation type="unfinished">F12</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1104"/>
        <source>Formula Edit Mode</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1111"/>
        <source>Select All</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1118"/>
        <source>&amp;Add Column</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1119"/>
        <source>append a new column to the table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1126"/>
        <source>Clear Table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1131"/>
        <source>Clear Masks</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1138"/>
        <source>&amp;Sort Table</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1145"/>
        <source>&amp;Go to Cell</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1146"/>
        <source>Ctrl+Alt+G</source>
        <translation type="unfinished">Ctrl+Alt+G</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1150"/>
        <source>&amp;Dimensions</source>
        <comment>table size</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1151"/>
        <source>change the table size</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1158"/>
        <source>&amp;Insert Empty Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1165"/>
        <source>Remo&amp;ve Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1172"/>
        <source>Clea&amp;r Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1179"/>
        <source>&amp;Add Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1183"/>
        <source>X</source>
        <comment>plot designation</comment>
        <translation type="unfinished">X</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1186"/>
        <source>Y</source>
        <comment>plot designation</comment>
        <translation type="unfinished">Y</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1189"/>
        <source>Z</source>
        <comment>plot designation</comment>
        <translation type="unfinished">Z</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1195"/>
        <source>X Error</source>
        <comment>plot designation</comment>
        <translation type="unfinished">Erreur en X</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1202"/>
        <source>Y Error</source>
        <comment>plot designation</comment>
        <translation type="unfinished">Erreur en Y</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1206"/>
        <source>None</source>
        <comment>plot designation</comment>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1212"/>
        <source>&amp;Normalize Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1219"/>
        <source>&amp;Normalize Selection</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1226"/>
        <source>&amp;Sort Columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1230"/>
        <source>Column Statisti&amp;cs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1231"/>
        <source>statistics on columns</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1237"/>
        <source>Change &amp;Type &amp;&amp; Format</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1238"/>
        <source>Ctrl+Alt+O</source>
        <translation type="unfinished">Ctrl+Alt+O</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1245"/>
        <source>Edit Column &amp;Description</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1253"/>
        <source>&amp;Insert Empty Rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1260"/>
        <source>Remo&amp;ve Rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1267"/>
        <source>Clea&amp;r Rows</source>
        <translation type="unfinished">Effacer les rangées</translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1274"/>
        <source>&amp;Add Rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1278"/>
        <source>Row Statisti&amp;cs</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1279"/>
        <source>statistics on rows</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1568"/>
        <location filename="../src/future/table/future_Table.cpp" line="1572"/>
        <source>Go to Cell</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1568"/>
        <source>Enter column</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1572"/>
        <source>Enter row</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1584"/>
        <source>Set Table Dimensions</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1599"/>
        <source>%1: move column %2 from position %3 to %4.</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="1734"/>
        <source>%1: sort column(s)</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2113"/>
        <source>invalid row or column count</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2133"/>
        <source>Column %1</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2149"/>
        <source>unknown element &apos;%1&apos;</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2155"/>
        <source>columns attribute and number of read columns do not match</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2158"/>
        <source>no table element found</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2169"/>
        <source>Hide Comments</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2171"/>
        <source>Show Comments</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2175"/>
        <source>Hide Controls</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2177"/>
        <source>Show Controls</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2188"/>
        <source>invalid or missing column index</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2195"/>
        <source>invalid column width</source>
        <translation type="unfinished"></translation>
    </message>
    <message>
        <location filename="../src/future/table/future_Table.cpp" line="2232"/>
        <source>Table</source>
        <translation type="unfinished">Table</translation>
    </message>
</context>
<context>
    <name>genDialog</name>
    <message>
        <source>QtiPlot - General Plot Options</source>
        <translation type="obsolete">Qtiplot - Options générales pour les graphes</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annule</translation>
    </message>
    <message>
        <source>From</source>
        <translation type="obsolete">De</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">Type</translation>
    </message>
    <message>
        <source>linear</source>
        <translation type="obsolete">linéaire</translation>
    </message>
    <message>
        <source>logarithmic</source>
        <translation type="obsolete">logarithmique</translation>
    </message>
    <message>
        <source>Inverted</source>
        <translation type="obsolete">Inversé</translation>
    </message>
    <message>
        <source>Step</source>
        <translation type="obsolete">Intervalle</translation>
    </message>
    <message>
        <source>Major Ticks</source>
        <translation type="obsolete">Graduations Principales</translation>
    </message>
    <message>
        <source>Minor Ticks</source>
        <translation type="obsolete">Graduations Secondaires</translation>
    </message>
    <message>
        <source>Scale</source>
        <translation type="obsolete">Echelle</translation>
    </message>
    <message>
        <source>Major Grids</source>
        <translation type="obsolete">Grille Principale</translation>
    </message>
    <message>
        <source>Minor Grids</source>
        <translation type="obsolete">Grille Secondaire</translation>
    </message>
    <message>
        <source>Line Color</source>
        <translation type="obsolete">Couleur des Lignes</translation>
    </message>
    <message>
        <source>Line Type</source>
        <translation type="obsolete">Type de Lignes</translation>
    </message>
    <message>
        <source>Thickness</source>
        <translation type="obsolete">Epaisseur</translation>
    </message>
    <message>
        <source>Aditional lines</source>
        <translation type="obsolete">Lignes supplémentaires</translation>
    </message>
    <message>
        <source>X=0</source>
        <translation type="obsolete">X=0</translation>
    </message>
    <message>
        <source>Y=0</source>
        <translation type="obsolete">Y=0</translation>
    </message>
    <message>
        <source>Grid</source>
        <translation type="obsolete">Grille</translation>
    </message>
    <message>
        <source>Show</source>
        <translation type="obsolete">Montrer</translation>
    </message>
    <message>
        <source>Title</source>
        <translation type="obsolete">Titre</translation>
    </message>
    <message>
        <source>Numeric</source>
        <translation type="obsolete">Numérique</translation>
    </message>
    <message>
        <source>Text from table</source>
        <translation type="obsolete">Texte de la table</translation>
    </message>
    <message>
        <source>Day of the week</source>
        <translation type="obsolete">Jour de la semaine</translation>
    </message>
    <message>
        <source>Month</source>
        <translation type="obsolete">Mois</translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="obsolete">Temps</translation>
    </message>
    <message>
        <source>Date</source>
        <translation type="obsolete">Date</translation>
    </message>
    <message>
        <source>Font</source>
        <translation type="obsolete">Police</translation>
    </message>
    <message>
        <source>Axis &amp;Font</source>
        <translation type="obsolete">&amp;Police pour les Axes</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>Ticks</source>
        <translation type="obsolete">Graduations</translation>
    </message>
    <message>
        <source>In</source>
        <translation type="obsolete">Intérieures</translation>
    </message>
    <message>
        <source>Out</source>
        <translation type="obsolete">Extérieures</translation>
    </message>
    <message>
        <source>Both</source>
        <translation type="obsolete">Les deux</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Aucune</translation>
    </message>
    <message>
        <source>Stand-off</source>
        <translation type="obsolete">Décalage</translation>
    </message>
    <message>
        <source>Show Labels</source>
        <translation type="obsolete">Montrer les étiquettes</translation>
    </message>
    <message>
        <source>Table</source>
        <translation type="obsolete">Table</translation>
    </message>
    <message>
        <source>Format</source>
        <translation type="obsolete">Format</translation>
    </message>
    <message>
        <source>Automatic</source>
        <translation type="obsolete">Automatique</translation>
    </message>
    <message>
        <source>Decimal: 100.0</source>
        <translation type="obsolete">Décimal: 100.0</translation>
    </message>
    <message>
        <source>Scientific: 1e2</source>
        <translation type="obsolete">Scientifique: 1e2</translation>
    </message>
    <message>
        <source>Scientific: 10^2</source>
        <translation type="obsolete">Scientifique: 10^2</translation>
    </message>
    <message>
        <source>Precision</source>
        <translation type="obsolete">Précision</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="obsolete">Angle</translation>
    </message>
    <message>
        <source>Axis</source>
        <translation type="obsolete">Axes</translation>
    </message>
    <message>
        <source>Canvas frame</source>
        <translation type="obsolete">Cadre du graphique</translation>
    </message>
    <message>
        <source>Width</source>
        <translation type="obsolete">Epaisseur</translation>
    </message>
    <message>
        <source>Axes</source>
        <translation type="obsolete">Axes</translation>
    </message>
    <message>
        <source>Draw backbones</source>
        <translation type="obsolete">Tracer les axes</translation>
    </message>
    <message>
        <source>Line Width</source>
        <translation type="obsolete">Epaisseur des lignes</translation>
    </message>
    <message>
        <source>Major ticks length</source>
        <translation type="obsolete">Longueur des graduations principales</translation>
    </message>
    <message>
        <source>Minor ticks length</source>
        <translation type="obsolete">Longueur des graduations secondaires</translation>
    </message>
    <message>
        <source>General</source>
        <translation type="obsolete">Général</translation>
    </message>
    <message>
        <source>h</source>
        <translation type="obsolete">h</translation>
    </message>
    <message>
        <source>h ap</source>
        <translation type="obsolete">h ap</translation>
    </message>
    <message>
        <source>h AP</source>
        <translation type="obsolete">h AP</translation>
    </message>
    <message>
        <source>h:mm</source>
        <translation type="obsolete">h:mm</translation>
    </message>
    <message>
        <source>h:mm ap</source>
        <translation type="obsolete">h:mm ap</translation>
    </message>
    <message>
        <source>hh:mm</source>
        <translation type="obsolete">hh:mm</translation>
    </message>
    <message>
        <source>h:mm:ss</source>
        <translation type="obsolete">h:mm:ss</translation>
    </message>
    <message>
        <source>h:mm:ss.zzz</source>
        <translation type="obsolete">h:mm:ss.mmm</translation>
    </message>
    <message>
        <source>mm:ss</source>
        <translation type="obsolete">mm:ss</translation>
    </message>
    <message>
        <source>mm:ss.zzz</source>
        <translation type="obsolete">mm:ss.mmm</translation>
    </message>
    <message>
        <source>hmm</source>
        <translation type="obsolete">hmm</translation>
    </message>
    <message>
        <source>hmmss</source>
        <translation type="obsolete">hmmss</translation>
    </message>
    <message>
        <source>hhmmss</source>
        <translation type="obsolete">hhmmss</translation>
    </message>
    <message>
        <source>yyyy-MM-dd</source>
        <translation type="obsolete">aaaa-MM-jj</translation>
    </message>
    <message>
        <source>dd.MM.yyyy</source>
        <translation type="obsolete">jj.MM.aaaa</translation>
    </message>
    <message>
        <source>ddd MMMM d yy</source>
        <translation type="obsolete">jjj MMMM j aa</translation>
    </message>
    <message>
        <source>dd/MM/yyyy</source>
        <translation type="obsolete">jj/MM/aaaa</translation>
    </message>
    <message>
        <source>milisec.</source>
        <translation type="obsolete">milisec.</translation>
    </message>
    <message>
        <source>sec.</source>
        <translation type="obsolete">sec.</translation>
    </message>
    <message>
        <source>min.</source>
        <translation type="obsolete">min.</translation>
    </message>
    <message>
        <source>hours</source>
        <translation type="obsolete">Heures</translation>
    </message>
    <message>
        <source>days</source>
        <translation type="obsolete">Jours</translation>
    </message>
    <message>
        <source>weeks</source>
        <translation type="obsolete">Semaines</translation>
    </message>
    <message>
        <source>QtiPlot - Start limit error</source>
        <translation type="obsolete">Qtiplot - Erreur maximale au début</translation>
    </message>
    <message>
        <source>QtiPlot - End limit error</source>
        <translation type="obsolete">Qtiplot - Erreur maximale à la fin</translation>
    </message>
    <message>
        <source>QtiPlot - Step input error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée du pas</translation>
    </message>
    <message>
        <source>Please enter a positive step value!</source>
        <translation type="obsolete">Veuillez entrer une valeur positive pour le pas!</translation>
    </message>
    <message>
        <source>Co&amp;lor</source>
        <translation type="obsolete">Co&amp;uleur</translation>
    </message>
    <message>
        <source>C&amp;olor</source>
        <translation type="obsolete">C&amp;ouleur</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">Arriêre plan</translation>
    </message>
    <message>
        <source>Border Width</source>
        <translation type="obsolete">Epaisseur de la bordure</translation>
    </message>
    <message>
        <source>Border Color</source>
        <translation type="obsolete">Couleur de la bordure</translation>
    </message>
    <message>
        <source>Colo&amp;r</source>
        <translation type="obsolete">Couleu&amp;r</translation>
    </message>
    <message>
        <source>Margin</source>
        <translation type="obsolete">Marge</translation>
    </message>
    <message>
        <source>Apply to all layers</source>
        <translation type="obsolete">Appliquer à tous les calques</translation>
    </message>
    <message>
        <source>Additional lines</source>
        <translation type="obsolete">Lignes suplémentaires</translation>
    </message>
</context>
<context>
    <name>imageDialog</name>
    <message>
        <source>Origin</source>
        <translation type="obsolete">Origine</translation>
    </message>
    <message>
        <source>X= </source>
        <translation type="obsolete">X = </translation>
    </message>
    <message>
        <source>Y= </source>
        <translation type="obsolete">Y =  </translation>
    </message>
    <message>
        <source>Size</source>
        <translation type="obsolete">Dimension</translation>
    </message>
    <message>
        <source>width= </source>
        <translation type="obsolete">Largeur = </translation>
    </message>
    <message>
        <source>height= </source>
        <translation type="obsolete">Hauteur = </translation>
    </message>
    <message>
        <source>QtiPlot - Image Geometry</source>
        <translation type="obsolete">Qtiplot - Taille de l&apos;image</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source> pixels</source>
        <translation type="obsolete">pixels</translation>
    </message>
</context>
<context>
    <name>imageExportDialog</name>
    <message>
        <source>Image format</source>
        <translation type="obsolete">Format de l&apos;image</translation>
    </message>
    <message>
        <source>Image quality</source>
        <translation type="obsolete">Qualité de l&apos;image</translation>
    </message>
    <message>
        <source>QtiPlot - Export options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;exportation</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
</context>
<context>
    <name>importDialog</name>
    <message>
        <source>Separator</source>
        <translation type="obsolete">Séparateur</translation>
    </message>
    <message>
        <source>Ignore first</source>
        <translation type="obsolete">Ignorer les premières</translation>
    </message>
    <message>
        <source>QtiPlot - ASCII Import Options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;importation de fichiers ASCII</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>;</source>
        <translation type="obsolete">;</translation>
    </message>
    <message>
        <source>,</source>
        <translation type="obsolete">,</translation>
    </message>
    <message>
        <source>TAB</source>
        <translation type="obsolete">Tabulation</translation>
    </message>
    <message>
        <source>SPACE</source>
        <translation type="obsolete">Espace</translation>
    </message>
    <message>
        <source>;TAB</source>
        <translation type="obsolete">;Tabulation</translation>
    </message>
    <message>
        <source>,TAB</source>
        <translation type="obsolete">,Tabulation</translation>
    </message>
    <message>
        <source>;SPACE</source>
        <translation type="obsolete">;Espace</translation>
    </message>
    <message>
        <source>,SPACE</source>
        <translation type="obsolete">,Espace</translation>
    </message>
    <message>
        <source>Use first row to &amp;name columns</source>
        <translation type="obsolete">Utiliser la première rangée pour nommer les colonnes</translation>
    </message>
    <message>
        <source>The column separator can be customized. The following special codes can be used:
\t for a TAB character 
\s for a SPACE</source>
        <translation type="obsolete">Le séparateur de colonne peut être personnalisé. Les codes spéciaux suivant peuvent être utilisés :
\t pour une tabulation
\s pour une espace</translation>
    </message>
    <message>
        <source>The separator must not contain the following characters: 0-9eE.+-</source>
        <translation type="obsolete">Le séparateur ne doit pas contenir un des caractères suivant : 0-9eE.+-</translation>
    </message>
    <message>
        <source>lines</source>
        <translation type="obsolete">lignes</translation>
    </message>
    <message>
        <source>By checking this option all white spaces will be removed from the beginning and the end of the lines in the ASCII file.</source>
        <translation type="obsolete">En validant cette option, toutes les espaces du fichier ASCII seront supprimées.</translation>
    </message>
    <message>
        <source>Warning: checking this option leads to column overlaping if the columns in the ASCII file don&apos;t have the same number of rows.</source>
        <translation type="obsolete">Attention : Valider cette option entrainera un recouvrement de colonnes si les colonnes du fichier ASCII n&apos;ont pas le même nombre de rangées.</translation>
    </message>
    <message>
        <source>To avoid this problem you should precisely define the column separator using TAB and SPACE characters.</source>
        <translation type="obsolete">Pour éviter ce problème, vous devez définir les séparateurs de colonnes à TAB ou à SPACE.</translation>
    </message>
    <message>
        <source>By checking this option all white spaces will be removed from the beginning and the end of the lines and each sequence of internal whitespaces (including the TAB character) will be replaced with a single space.</source>
        <translation type="obsolete">En validant cette option, toutes les espaces du fichier seront supprimées et les tabulations seront remplacées par une espace unique.</translation>
    </message>
    <message>
        <source>Remove white spaces from line ends</source>
        <translation type="obsolete">Supprimer les espaces de fin de lignes</translation>
    </message>
    <message>
        <source>Simplify white spaces</source>
        <translation type="obsolete">Simplifier les espaces</translation>
    </message>
    <message>
        <source>By checking this option each sequence of internal whitespaces (including the TAB character) will be replaced with a single space.</source>
        <translation type="obsolete">En validant cette option, toutes les espaces (y compris les tabulations) seront remplacées par une espace unique.</translation>
    </message>
    <message>
        <source>Warning: using these two last options leads to column overlaping if the columns in the ASCII file don&apos;t have the same number of rows.</source>
        <translation type="obsolete">Attention : Utiliser ces deux dernières options entrainera le recouvrement de colonnes si les colonnes du fichier ASCII n&apos;ont pas le même nombre de rangées.</translation>
    </message>
    <message>
        <source>QtiPlot - Help</source>
        <translation type="obsolete">QtiPlot - Aide</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">Fermer</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="obsolete">Aide</translation>
    </message>
    <message>
        <source>&amp;Remove white spaces from line ends</source>
        <translation type="obsolete">Supprime&amp;r les espaces de fin de lignes</translation>
    </message>
    <message>
        <source>&amp;Simplify white spaces</source>
        <translation type="obsolete">&amp;Simplifier les espaces</translation>
    </message>
    <message>
        <source>QtiPlot - Import options error</source>
        <translation type="obsolete">QtiPlot - Erreur d&apos;importation des données</translation>
    </message>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <source>Do you want to save the modifications to the ASCII import options before closing?</source>
        <translation type="obsolete">Voulez-vous sauvegarder les modifications d&apos;importations des fichiers ASCII ?</translation>
    </message>
    <message>
        <source>Yes</source>
        <translation type="obsolete">Oui</translation>
    </message>
    <message>
        <source>No</source>
        <translation type="obsolete">Non</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Annuler</translation>
    </message>
</context>
<context>
    <name>intDialog</name>
    <message>
        <source>QtiPlot - Integration Options</source>
        <translation type="obsolete">Qtiplot - Options d&apos;intégration</translation>
    </message>
    <message>
        <source>Integration of</source>
        <translation type="obsolete">Intégration de</translation>
    </message>
    <message>
        <source>Order (1 - 5, 1 = Trapezoid Rule)</source>
        <translation type="obsolete">Ordre (1 à 5, 1 = méthode des trapêzes)</translation>
    </message>
    <message>
        <source>Number of iterations (Max=40)</source>
        <translation type="obsolete">Nombre d&apos;itérations (Max = 40)</translation>
    </message>
    <message>
        <source>Tolerance</source>
        <translation type="obsolete">Tolérance</translation>
    </message>
    <message>
        <source>Lower limit</source>
        <translation type="obsolete">Limite inférieure</translation>
    </message>
    <message>
        <source>Upper limit</source>
        <translation type="obsolete">Limite supérieure</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>&amp;Integrate</source>
        <translation type="obsolete">&amp;Intégrer</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">Fermer</translation>
    </message>
    <message>
        <source>&amp;Help</source>
        <translation type="obsolete">Aide</translation>
    </message>
    <message>
        <source>You can not fit index:</source>
        <translation type="obsolete">Vous ne pouvez pas ajuster l&apos;index :</translation>
    </message>
    <message>
        <source>because it has less than 2 points!</source>
        <translation type="obsolete">Parce qu&apos;il a moins de 2 points !</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>QtiPlot - Tolerance value error</source>
        <translation type="obsolete">QtiPlot - Erreur sur la valeur de la tolérance</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;entrée des paramètres</translation>
    </message>
    <message>
        <source>Please give a number larger or equal to the minimum value of X, for the lower limit.
 If you do not know that value, type min in the box.</source>
        <translation type="obsolete">Donnez un nombre supérieur ou égal à la plus petite valeur de X pour la limite inférieure.
Si vous ne la connaissez pas, tapez &apos;min&apos;.</translation>
    </message>
    <message>
        <source>Please give a number smaller or equal to the maximum value of X, for the lower limit.
 If you do not know that value, type max in the box.</source>
        <translation type="obsolete">Donnez un nombre inférieur à la plus petite valeur de X pour la limite inférieure.
Si vous ne la connaissez pas, tapez &apos;max&apos;.</translation>
    </message>
    <message>
        <source>QtiPlot - Start limit error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite de départ</translation>
    </message>
    <message>
        <source>Please give a number smaller or equal to the maximum value of X, for the upper limit.
 If you do not know that value, type max in the box.</source>
        <translation type="obsolete">Donnez un nombre inférieur à la plus petite valeur de X pour la limite supérieure.
Si vous ne la connaissez pas, tapez &apos;max&apos;.</translation>
    </message>
    <message>
        <source>Please give a number larger or equal to the minimum value of X, for the upper limit.
 If you do not know that value, type min in the box.</source>
        <translation type="obsolete">Donnez un nombre supérieur ou égal à la plus petite valeur de X pour la limite supérieure.
Si vous ne la connaissez pas, tapez &apos;min&apos;.</translation>
    </message>
    <message>
        <source>QtiPlot - End limit error</source>
        <translation type="obsolete">QtiPlot - Erreur de la limite d&apos;arrêt</translation>
    </message>
    <message>
        <source>QtiPlot - Help for Integration</source>
        <translation type="obsolete">QtiPlot - Aide pour l&apos;intégration</translation>
    </message>
    <message>
        <source>The integration of a curve consists of the following five steps:
 1) Choose which curve you want to integrate
 2) Set the order of the integration. The higher it is the more accurate the calculation is
 3) Choose the number of iterations 
 4) Choose the tollerance 
 5) Choose the lower and the upper limit.
 The code integrates the curve with an iterative algorithm. The tolerance determines the termination criteria for the solver.
 Because, sometimes we ask for too much accuracy, the number of iterations makes sure that the solver will not work for ever.
 IMPORTANT 
The limits must be within the range of x; If you do not know the maximum (minimum) value of x, type max (min) in the boxes.</source>
        <translation type="obsolete">L&apos;intégration d&apos;une courbe suit les 5 étapes suivantes :
1) Choisir quelle courbe intégrer
2) Fixer l&apos;ordre de l&apos;intégration. Plus l&apos;ordre est grand, plus la précision est importante
3) Choisir le nombre d&apos;itérations
4) Choisir la tolérance
5) Choisir les limites inférieures et supérieures
Le logiciel intègre la courbe à l&apos;aide d&apos;un algorithme itératif. La téloérance détermine le critère d&apos;arrêt pour le solveur.
Parce que, de temps en temps, nous demandons uen trop grande précésion, le nombre d&apos;itérations assure que le solveur ne bouclera pas indéfiniment.
IMPORTANT
Les limtes doivent être dans la gamme des x ; Si vous ne connaissez pas le maximum (minimum), tapez &apos;max&apos; (&apos;min&apos;).</translation>
    </message>
    <message>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="obsolete">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <source>You cannot fit index:</source>
        <translation type="obsolete">Vous ne pouvez pas ajuster l&apos;index :</translation>
    </message>
    <message>
        <source>The integration of a curve consists of the following five steps:
 1) Choose which curve you want to integrate
 2) Set the order of the integration. The higher it is the more accurate the calculation is
 3) Choose the number of iterations 
 4) Choose the tolerance 
 5) Choose the lower and the upper limit.
 The code integrates the curve with an iterative algorithm. The tolerance determines the termination criteria for the solver.
 Because, sometimes we ask for too much accuracy, the number of iterations makes sure that the solver will not work for ever.
 IMPORTANT 
The limits must be within the range of x; If you do not know the maximum (minimum) value of x, type max (min) in the boxes.</source>
        <translation type="obsolete">L&apos;intégration d&apos;une courbe, consiste à suivre les cinq points suivants :
1) Choisir quelle courbe vous voulez intégrer
2) Fixer l&apos;ordre d&apos;intégration. Plus l&apos;ordre est élevé, meilleure est la précision
3) Choisir le nombre d&apos;itérations
4) Choisir la tolérance
5) Choisir les limites inférieure et supérieure.
Le code intégre la courbe avec un algorithme itératif. La tolérance est le critère de fin d&apos;itération pour le solveur.
Parce que, quelque fois, nous demandons une trop grande précision, le nombre d&apos;itérations assure au solveur de ne pas calculer à l&apos;infini.
IMPORTANT
Les limites doivent être dans la gamme de x ; Si vous ne connaissez pas la valeur maximum (minimum) de x, tapez &apos;max&apos; (&apos;min&apos;) dans les zones d&apos;édition.</translation>
    </message>
</context>
<context>
    <name>interpolationDialog</name>
    <message>
        <source>QtiPlot - Interpolation Options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;interpolation</translation>
    </message>
    <message>
        <source>Make curve from</source>
        <translation type="obsolete">Interpolation de : </translation>
    </message>
    <message>
        <source>Spline</source>
        <translation type="obsolete">Interpolation</translation>
    </message>
    <message>
        <source>Points</source>
        <translation type="obsolete">Points</translation>
    </message>
    <message>
        <source>From Xmin</source>
        <translation type="obsolete">De Xmin = </translation>
    </message>
    <message>
        <source>0</source>
        <translation type="obsolete">0</translation>
    </message>
    <message>
        <source>To Xmax</source>
        <translation type="obsolete">à Xmax = </translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>&amp;Make</source>
        <translation type="obsolete">&amp;Calculer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Linear</source>
        <translation type="obsolete">linéaire</translation>
    </message>
    <message>
        <source>Cubic</source>
        <translation type="obsolete">Cubique</translation>
    </message>
    <message>
        <source>Non-rounded Akima</source>
        <translation type="obsolete">Akima non arrondie</translation>
    </message>
    <message>
        <source>QtiPlot - Start limit error</source>
        <translation type="obsolete">QtiPlot - Erreur sur la limite inférieure</translation>
    </message>
    <message>
        <source>QtiPlot - End limit error</source>
        <translation type="obsolete">QtiPlot - Erreur sur la limite supérieure</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;entrée des paramètres</translation>
    </message>
    <message>
        <source>Please enter x limits that satisfy: from &lt; to!</source>
        <translation type="obsolete">Donnez des limites en abscisses dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">Fermer</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="obsolete">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <source>You need at least %1 points to perform this operation! Operation aborted!</source>
        <translation type="obsolete">Il faut au moins %1 points pour pouvoir faire cette opération ! Opération annulée !</translation>
    </message>
</context>
<context>
    <name>layerDialog</name>
    <message>
        <source>Grid</source>
        <translation type="obsolete">Grille</translation>
    </message>
    <message>
        <source>Columns</source>
        <translation type="obsolete">Colonnes</translation>
    </message>
    <message>
        <source>Rows</source>
        <translation type="obsolete">Rangées</translation>
    </message>
    <message>
        <source>Spacing</source>
        <translation type="obsolete">Espacement</translation>
    </message>
    <message>
        <source>Columns gap</source>
        <translation type="obsolete">Ecart entre les colonnes</translation>
    </message>
    <message>
        <source>Rows gap</source>
        <translation type="obsolete">Ecart entre les rangées</translation>
    </message>
    <message>
        <source>Layout</source>
        <translation type="obsolete">Planche</translation>
    </message>
    <message>
        <source>Fonts</source>
        <translation type="obsolete">Polices</translation>
    </message>
    <message>
        <source>QtiPlot - Image Geometry</source>
        <translation type="obsolete">Qtiplot - Géométrie de l&apos;image</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Automatic &amp;layout</source>
        <translation type="obsolete">Redisposer les planches de manière automatique</translation>
    </message>
    <message>
        <source>QtiPlot - Columns input error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée de la colonne</translation>
    </message>
    <message>
        <source>QtiPlot - Rows input error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée de la rangée</translation>
    </message>
    <message>
        <source>Number of Layers</source>
        <translation type="obsolete">Nombre de planches</translation>
    </message>
    <message>
        <source>Alignement</source>
        <translation type="obsolete">Alignement</translation>
    </message>
    <message>
        <source>Horizontal</source>
        <translation type="obsolete">Horizontal</translation>
    </message>
    <message>
        <source>Center</source>
        <translation type="obsolete">Centré</translation>
    </message>
    <message>
        <source>Left</source>
        <translation type="obsolete">Gauche</translation>
    </message>
    <message>
        <source>Right</source>
        <translation type="obsolete">Droite</translation>
    </message>
    <message>
        <source>Vertical</source>
        <translation type="obsolete">Vertical</translation>
    </message>
    <message>
        <source>Top</source>
        <translation type="obsolete">Supérieur</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation type="obsolete">Inférieur</translation>
    </message>
    <message>
        <source>&amp;Layer Canvas Size</source>
        <translation type="obsolete">Tail&amp;le du Canevas des planches</translation>
    </message>
    <message>
        <source>Width</source>
        <translation type="obsolete">Largeur</translation>
    </message>
    <message>
        <source> pixels</source>
        <translation type="obsolete">  pixels</translation>
    </message>
    <message>
        <source>Height</source>
        <translation type="obsolete">Hauteur</translation>
    </message>
    <message>
        <source>Left margin</source>
        <translation type="obsolete">Marge de gauche</translation>
    </message>
    <message>
        <source>Right margin</source>
        <translation type="obsolete">Marge de droite</translation>
    </message>
    <message>
        <source>Top margin</source>
        <translation type="obsolete">Marche supérieure</translation>
    </message>
    <message>
        <source>Bottom margin</source>
        <translation type="obsolete">Marge inférieure</translation>
    </message>
    <message>
        <source>QtiPlot - Arrange Layers</source>
        <translation type="obsolete">QtiPlot - Redisposer les planches</translation>
    </message>
    <message>
        <source>Titles</source>
        <translation type="obsolete">Titres</translation>
    </message>
    <message>
        <source>Axis Legends</source>
        <translation type="obsolete">Légende des axes</translation>
    </message>
    <message>
        <source>Axis Numbers</source>
        <translation type="obsolete">Nombres de axes</translation>
    </message>
    <message>
        <source>Legends</source>
        <translation type="obsolete">Légendes</translation>
    </message>
    <message>
        <source>QtiPlot - Delete Layers?</source>
        <translation type="obsolete">QtiPlot - Effacer les planches ?</translation>
    </message>
    <message>
        <source>You are about to delete %1 existing layers.</source>
        <translation type="obsolete">Vous allez supprimer %1 planches existantes.</translation>
    </message>
    <message>
        <source>Are you sure you want to continue this operation?</source>
        <translation type="obsolete">Etes vous certain de continuer cette opération ?</translation>
    </message>
    <message>
        <source>&amp;Continue</source>
        <translation type="obsolete">&amp;Continuer</translation>
    </message>
    <message>
        <source>The number of columns you&apos;ve entered is greater than the number of graphs (%1)!</source>
        <translation type="obsolete">Le nombre de colonnes que vous avez donné est plus grand que le nombre de graphes (%1) !</translation>
    </message>
    <message>
        <source>The number of rows you&apos;ve entered is greater than the number of graphs (%1)!</source>
        <translation type="obsolete">Le nombre de rangées que vous avez donné est plus grand que le nombre de graphes (%1) !</translation>
    </message>
</context>
<context>
    <name>lineDialog</name>
    <message>
        <source>QtiPlot - Line options</source>
        <translation type="obsolete">Qtiplot - Options de la ligne</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>Line type</source>
        <translation type="obsolete">Type de ligne</translation>
    </message>
    <message>
        <source>Line width</source>
        <translation type="obsolete">Epaisseur de la ligne</translation>
    </message>
    <message>
        <source>1</source>
        <translation type="obsolete">1</translation>
    </message>
    <message>
        <source>2</source>
        <translation type="obsolete">2</translation>
    </message>
    <message>
        <source>3</source>
        <translation type="obsolete">3</translation>
    </message>
    <message>
        <source>4</source>
        <translation type="obsolete">4</translation>
    </message>
    <message>
        <source>5</source>
        <translation type="obsolete">5</translation>
    </message>
    <message>
        <source>Arrow at &amp;start</source>
        <translation type="obsolete">Flêche au &amp;début</translation>
    </message>
    <message>
        <source>Arrow at &amp;end</source>
        <translation type="obsolete">Flêche à la &amp;fin</translation>
    </message>
    <message>
        <source>Opti&amp;ons</source>
        <translation type="obsolete">Opti&amp;ons</translation>
    </message>
    <message>
        <source>Length</source>
        <translation type="obsolete">Longueur</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="obsolete">Angle</translation>
    </message>
    <message>
        <source>&amp;Filled</source>
        <translation type="obsolete">&amp;Pleine</translation>
    </message>
    <message>
        <source>Arrow &amp;Head</source>
        <translation type="obsolete">&amp;Tête de la flêche</translation>
    </message>
    <message>
        <source>Start Point</source>
        <translation type="obsolete">Point de départ</translation>
    </message>
    <message>
        <source>X</source>
        <translation type="obsolete">X</translation>
    </message>
    <message>
        <source>Y</source>
        <translation type="obsolete">Y</translation>
    </message>
    <message>
        <source>End Point</source>
        <translation type="obsolete">Point terminal</translation>
    </message>
    <message>
        <source>&amp;Geometry</source>
        <translation type="obsolete">&amp;Géometrie</translation>
    </message>
    <message>
        <source>&amp;Ok</source>
        <translation type="obsolete">&amp;Ok</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Co&amp;lor</source>
        <translation type="obsolete">Cou&amp;leur</translation>
    </message>
    <message>
        <source>Set &amp;Default</source>
        <translation type="obsolete">&amp;Défault</translation>
    </message>
    <message>
        <source>Unit</source>
        <translation type="obsolete">Unité</translation>
    </message>
    <message>
        <source>Pixels</source>
        <translation type="obsolete">Pixels</translation>
    </message>
    <message>
        <source>Scale Coordinates</source>
        <translation type="obsolete">Echelle des coordonnées</translation>
    </message>
</context>
<context>
    <name>matrixDialog</name>
    <message>
        <source>Cell Width</source>
        <translation type="obsolete">Largeur des cellules</translation>
    </message>
    <message>
        <source>Data Format</source>
        <translation type="obsolete">Format des données</translation>
    </message>
    <message>
        <source>Numeric Display</source>
        <translation type="obsolete">Nombre de décimales</translation>
    </message>
    <message>
        <source>QtiPlot - Matrix Properties</source>
        <translation type="obsolete">Qtiplot - Propriétés de la matrice</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">Annuler</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>Decimal: 1000</source>
        <translation type="obsolete">Décimal : 1000</translation>
    </message>
    <message>
        <source>Scientific: 1E3</source>
        <translation type="obsolete">Scientifique : 1E3</translation>
    </message>
    <message>
        <source>Default Decimal Digits</source>
        <translation type="obsolete">Par défaut</translation>
    </message>
    <message>
        <source>Significant Digits=</source>
        <translation type="obsolete">Fixées à </translation>
    </message>
</context>
<context>
    <name>matrixSizeDialog</name>
    <message>
        <source>Rows</source>
        <translation type="obsolete">Rangées</translation>
    </message>
    <message>
        <source>Columns</source>
        <translation type="obsolete">Colonnes</translation>
    </message>
    <message>
        <source>QtiPlot - Matrix Dimensions</source>
        <translation type="obsolete">Qtiplot - Taille de la matrice</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Dimensions</source>
        <translation type="obsolete">Dimensions</translation>
    </message>
    <message>
        <source>Coordinates</source>
        <translation type="obsolete">Coordonnées</translation>
    </message>
    <message>
        <source>X (Columns)</source>
        <translation type="obsolete">X (Colonnes)</translation>
    </message>
    <message>
        <source>Y (Rows)</source>
        <translation type="obsolete">Y (Rangées)</translation>
    </message>
    <message>
        <source>First</source>
        <translation type="obsolete">Premier</translation>
    </message>
    <message>
        <source>Last</source>
        <translation type="obsolete">Dernier</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;entrée des paramètres</translation>
    </message>
</context>
<context>
    <name>matrixValuesDialog</name>
    <message>
        <source>QtiPlot - Set Matrix Values</source>
        <translation type="obsolete">Qtiplot - Fixer les valeurs de la matrice</translation>
    </message>
    <message>
        <source>For row (i)</source>
        <translation type="obsolete">Pour la rangée (i)</translation>
    </message>
    <message>
        <source>to</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>For col (j)</source>
        <translation type="obsolete">Pour la colonne (j)</translation>
    </message>
    <message>
        <source>Add function</source>
        <translation type="obsolete">Ajouter la fonction</translation>
    </message>
    <message>
        <source>Add Cell</source>
        <translation type="obsolete">Ajouter la cellule</translation>
    </message>
    <message>
        <source>Cell(i,j)=</source>
        <translation type="obsolete">Cellule(i,j)=</translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="obsolete">OK</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation type="obsolete">Appliquer</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Input function error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée de la fonction</translation>
    </message>
    <message>
        <source>You can not use cells recursevely!</source>
        <translation type="obsolete">Vous ne pouvez pas utiliser les cellules récursivement!</translation>
    </message>
    <message>
        <source>Column and row indexes must be greater than zero!</source>
        <translation type="obsolete">Les indices des rangées et des colonnes doivent ètre supérieurs à zéro !</translation>
    </message>
</context>
<context>
    <name>muParserScript</name>
    <message>
        <source>Out of memory</source>
        <translation type="obsolete">Manque de mémoire</translation>
    </message>
    <message>
        <source>You cannot use imbricated columns!</source>
        <translation type="obsolete">Vous ne pouvez pas utiliser des colonnes imbriquées !</translation>
    </message>
    <message>
        <source>You cannot use cells recursively!</source>
        <translation type="obsolete">Vous ne pouvez pas utiliser des cellules recursivement !</translation>
    </message>
    <message>
        <source>Too many &apos;=&apos; in one line.</source>
        <translation type="obsolete">Trop de &apos;=&apos; dans une ligne.</translation>
    </message>
    <message>
        <source>Syntax error: &apos;=&apos; without variable name.</source>
        <translation type="obsolete">Erreur de syntaxe : &apos;=&apos; sans nom de variable.</translation>
    </message>
    <message>
        <source>col() works only on tables!</source>
        <translation type="obsolete">col() ne fonctionne qu&apos;avec des tables !</translation>
    </message>
    <message>
        <source>There&apos;s no column named %1 in table %2!</source>
        <translation type="obsolete">Il y a une colonne nommée %1 dans la table %2 !</translation>
    </message>
    <message>
        <source>There&apos;s no row %1 in table %2!</source>
        <translation type="obsolete">Il y a une rangée nommée %1 dans la table %2 !</translation>
    </message>
    <message>
        <source>There&apos;s no column %1 in table %2!</source>
        <translation type="obsolete">Il n&apos;y a pas de colonne %1 dans la table %2 !</translation>
    </message>
    <message>
        <source>cell() works only on matrices!</source>
        <translation type="obsolete">cell() ne fonctionne qu&apos;avec des matrices !</translation>
    </message>
    <message>
        <source>There&apos;s no row %1 in matrix %2!</source>
        <translation type="obsolete">Il n&apos;y a pas de rangées %1 dans la matrice %2 !</translation>
    </message>
    <message>
        <source>There&apos;s no column %1 in matrix %2!</source>
        <translation type="obsolete">Il n&apos;y a pas de colonne %1 dans la matrice %2 !</translation>
    </message>
</context>
<context>
    <name>myWidget</name>
    <message>
        <source>QtiPlot</source>
        <translation type="obsolete">QtiPlot</translation>
    </message>
    <message>
        <source>Do you want to hide or delete</source>
        <translation type="obsolete">Voulez-vous Cacher ou Supprimer</translation>
    </message>
    <message>
        <source>Delete</source>
        <translation type="obsolete">Supprimer</translation>
    </message>
    <message>
        <source>Hide</source>
        <translation type="obsolete">Cacher</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">Annuler</translation>
    </message>
    <message>
        <source>Normal</source>
        <translation type="obsolete">Normal</translation>
    </message>
    <message>
        <source>Hidden</source>
        <translation type="obsolete">Caché</translation>
    </message>
    <message>
        <source>Minimized</source>
        <translation type="obsolete">Minimum</translation>
    </message>
    <message>
        <source>Maximized</source>
        <translation type="obsolete">Maximum</translation>
    </message>
    <message>
        <source>kB</source>
        <translation type="obsolete">kOctects</translation>
    </message>
</context>
<context>
    <name>pieDialog</name>
    <message>
        <source>QtiPlot - Pie Options</source>
        <translation type="obsolete">Qtiplot - Options pour les graphes à secteurs</translation>
    </message>
    <message>
        <source>Border</source>
        <translation type="obsolete">Bordure</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>Style</source>
        <translation type="obsolete">Style</translation>
    </message>
    <message>
        <source>Width</source>
        <translation type="obsolete">Largeur</translation>
    </message>
    <message>
        <source>Fill</source>
        <translation type="obsolete">Palette</translation>
    </message>
    <message>
        <source>First color</source>
        <translation type="obsolete">Première couleur</translation>
    </message>
    <message>
        <source>Pattern</source>
        <translation type="obsolete">Texture</translation>
    </message>
    <message>
        <source>Pie ray</source>
        <translation type="obsolete">Hachures</translation>
    </message>
    <message>
        <source>Pie</source>
        <translation type="obsolete">Diagramme</translation>
    </message>
    <message>
        <source>&amp;Worksheet</source>
        <translation type="obsolete">&amp;Feuille de calcul</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">Arrière plan</translation>
    </message>
    <message>
        <source>Co&amp;lor</source>
        <translation type="obsolete">Cou&amp;leur</translation>
    </message>
    <message>
        <source>Border Width</source>
        <translation type="obsolete">Epaisseur de la bordure</translation>
    </message>
    <message>
        <source>Border Color</source>
        <translation type="obsolete">Couleur de la bordure</translation>
    </message>
    <message>
        <source>Colo&amp;r</source>
        <translation type="obsolete">Couleu&amp;r</translation>
    </message>
    <message>
        <source>Options</source>
        <translation type="obsolete">Options</translation>
    </message>
    <message>
        <source>Margin</source>
        <translation type="obsolete">Marge</translation>
    </message>
    <message>
        <source>Apply to all layers</source>
        <translation type="obsolete">Appliquer à toutes les planches</translation>
    </message>
    <message>
        <source>General</source>
        <translation type="obsolete">Général</translation>
    </message>
    <message>
        <source>Pie radius</source>
        <translation type="obsolete">Rayon du graphe à secteurs</translation>
    </message>
    <message>
        <source>Canvas Color</source>
        <translation type="obsolete">Couleur du cadre</translation>
    </message>
</context>
<context>
    <name>plot3DDialog</name>
    <message>
        <source>QtiPlot - Surface Plot Options</source>
        <translation type="obsolete">Qtiplot - Options pour les graphes 3D</translation>
    </message>
    <message>
        <source>X</source>
        <translation type="obsolete">X</translation>
    </message>
    <message>
        <source>Y</source>
        <translation type="obsolete">Y</translation>
    </message>
    <message>
        <source>Z</source>
        <translation type="obsolete">Z</translation>
    </message>
    <message>
        <source>From</source>
        <translation type="obsolete">De</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">Type</translation>
    </message>
    <message>
        <source>linear</source>
        <translation type="obsolete">Linéaire</translation>
    </message>
    <message>
        <source>logarithmic</source>
        <translation type="obsolete">logarithmique</translation>
    </message>
    <message>
        <source>Major Ticks</source>
        <translation type="obsolete">Graduations principales</translation>
    </message>
    <message>
        <source>MinorTicks</source>
        <translation type="obsolete">Graduations secondaires</translation>
    </message>
    <message>
        <source>&amp;Scale</source>
        <translation type="obsolete">&amp;Echelle</translation>
    </message>
    <message>
        <source>Title</source>
        <translation type="obsolete">Titre</translation>
    </message>
    <message>
        <source>Axis Font</source>
        <translation type="obsolete">Police</translation>
    </message>
    <message>
        <source>&amp;Choose font</source>
        <translation type="obsolete">Modifiez</translation>
    </message>
    <message>
        <source>Major Ticks Length</source>
        <translation type="obsolete">Longueur des graduations principales</translation>
    </message>
    <message>
        <source>Minor Ticks Length</source>
        <translation type="obsolete">Longueur des graduations secondaires</translation>
    </message>
    <message>
        <source>&amp;Axis</source>
        <translation type="obsolete">&amp;Axes</translation>
    </message>
    <message>
        <source>&amp;Color</source>
        <translation type="obsolete">&amp;Couleur</translation>
    </message>
    <message>
        <source>&amp;Font</source>
        <translation type="obsolete">&amp;Police</translation>
    </message>
    <message>
        <source>&amp;Title</source>
        <translation type="obsolete">&amp;Titre</translation>
    </message>
    <message>
        <source>Data</source>
        <translation type="obsolete">Données</translation>
    </message>
    <message>
        <source>Ma&amp;x</source>
        <translation type="obsolete">Ma&amp;x</translation>
    </message>
    <message>
        <source>&amp;Min</source>
        <translation type="obsolete">&amp;Min</translation>
    </message>
    <message>
        <source>General</source>
        <translation type="obsolete">Général</translation>
    </message>
    <message>
        <source>&amp;Line</source>
        <translation type="obsolete">&amp;Ligne</translation>
    </message>
    <message>
        <source>&amp;Background</source>
        <translation type="obsolete">&amp;Arrière plan</translation>
    </message>
    <message>
        <source>Coordinate System</source>
        <translation type="obsolete">Coordonnées système </translation>
    </message>
    <message>
        <source>&amp;Axes</source>
        <translation type="obsolete">&amp;Axes</translation>
    </message>
    <message>
        <source>Lab&amp;els</source>
        <translation type="obsolete">&amp;Etiquettes</translation>
    </message>
    <message>
        <source>&amp;Numbers</source>
        <translation type="obsolete">&amp;Nombres</translation>
    </message>
    <message>
        <source>&amp;Grid</source>
        <translation type="obsolete">&amp;Grille</translation>
    </message>
    <message>
        <source>Opacity</source>
        <translation type="obsolete">Opacité</translation>
    </message>
    <message>
        <source>&amp;Colors</source>
        <translation type="obsolete">&amp;Couleurs</translation>
    </message>
    <message>
        <source>Line Width</source>
        <translation type="obsolete">Epaisseur des lignes</translation>
    </message>
    <message>
        <source>Resolution</source>
        <translation type="obsolete">Résolution</translation>
    </message>
    <message>
        <source>Numbers Font</source>
        <translation type="obsolete">Police des nombres</translation>
    </message>
    <message>
        <source>&amp;Choose Font</source>
        <translation type="obsolete">Modifiez</translation>
    </message>
    <message>
        <source>Distance labels - axis</source>
        <translation type="obsolete">Distance étiquettes - axes</translation>
    </message>
    <message>
        <source>Zoom (%)</source>
        <translation type="obsolete">Zoom (%)</translation>
    </message>
    <message>
        <source>X Zoom (%)</source>
        <translation type="obsolete">Zoom en X (%)</translation>
    </message>
    <message>
        <source>Y Zoom (%)</source>
        <translation type="obsolete">Zoom en Y (%)</translation>
    </message>
    <message>
        <source>Z Zoom (%)</source>
        <translation type="obsolete">Zoom en Z (%)</translation>
    </message>
    <message>
        <source>&amp;General</source>
        <translation type="obsolete">&amp;Général</translation>
    </message>
    <message>
        <source>&amp;Worksheet</source>
        <translation type="obsolete">&amp;Feuille de calcul</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Style</source>
        <translation type="obsolete">Style</translation>
    </message>
    <message>
        <source>Dot</source>
        <translation type="obsolete">Point</translation>
    </message>
    <message>
        <source>Cross Hair</source>
        <translation type="obsolete">Lignes croisées</translation>
    </message>
    <message>
        <source>Cone</source>
        <translation type="obsolete">Cône</translation>
    </message>
    <message>
        <source>Width</source>
        <translation type="obsolete">Largeur</translation>
    </message>
    <message>
        <source>Smooth angles</source>
        <translation type="obsolete">Angles arrondis</translation>
    </message>
    <message>
        <source>Radius</source>
        <translation type="obsolete">Rayon</translation>
    </message>
    <message>
        <source>Smooth line</source>
        <translation type="obsolete">Affinée</translation>
    </message>
    <message>
        <source>Boxed</source>
        <translation type="obsolete">Boites 3D</translation>
    </message>
    <message>
        <source>Quality</source>
        <translation type="obsolete">Qualité</translation>
    </message>
    <message>
        <source>Points</source>
        <translation type="obsolete">Points</translation>
    </message>
    <message>
        <source>Bars</source>
        <translation type="obsolete">Barres</translation>
    </message>
    <message>
        <source>QtiPlot - Start limit error</source>
        <translation type="obsolete">Qtiplot - Erreur maximale au début</translation>
    </message>
    <message>
        <source>QtiPlot - End limit error</source>
        <translation type="obsolete">Qtiplot - Erreur maximale à la fin</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">Qtiplot - Erreur: entrée incorrecte</translation>
    </message>
    <message>
        <source>Please enter scale limits that satisfy: from &lt; to!</source>
        <translation type="obsolete">Donnez des limites d&apos;échelle dans l&apos;ordre croissant !</translation>
    </message>
    <message>
        <source>Color Ma&amp;p</source>
        <translation type="obsolete">Carte de couleurs</translation>
    </message>
    <message>
        <source>Colormap files</source>
        <translation type="obsolete">Fichiers de cartes de couleurs</translation>
    </message>
</context>
<context>
    <name>plotDialog</name>
    <message>
        <source>QtiPlot - Custom plot</source>
        <translation type="obsolete">Qtiplot - Graphe défini par l&apos;utilisateur</translation>
    </message>
    <message>
        <source>Plot type</source>
        <translation type="obsolete">Type de graphe</translation>
    </message>
    <message>
        <source>Line</source>
        <translation type="obsolete">Lignes</translation>
    </message>
    <message>
        <source>Scatter</source>
        <translation type="obsolete">Nuage de Points</translation>
    </message>
    <message>
        <source>Line + Symbol</source>
        <translation type="obsolete">Lignes + Symboles</translation>
    </message>
    <message>
        <source>Vertical Bars</source>
        <translation type="obsolete">Barres Verticales</translation>
    </message>
    <message>
        <source>Horizontal Bars</source>
        <translation type="obsolete">Barres Horizontales</translation>
    </message>
    <message>
        <source>Histogram</source>
        <translation type="obsolete">Histogramme</translation>
    </message>
    <message>
        <source>Vector XYXY</source>
        <translation type="obsolete">Vecteurs XYXY</translation>
    </message>
    <message>
        <source>Error Bars</source>
        <translation type="obsolete">Barres d&apos;erreurs</translation>
    </message>
    <message>
        <source>&amp;Plot Associations...</source>
        <translation type="obsolete">Matrice de Graphes...</translation>
    </message>
    <message>
        <source>&amp;Worksheet</source>
        <translation type="obsolete">Feuille de calcul</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">Qtiplot - Erreur</translation>
    </message>
    <message>
        <source>Connect</source>
        <translation type="obsolete">Style</translation>
    </message>
    <message>
        <source>Style</source>
        <translation type="obsolete">Motif</translation>
    </message>
    <message>
        <source>Width</source>
        <translation type="obsolete">Epaisseur</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>Fill color</source>
        <translation type="obsolete">Couleur de remplissage</translation>
    </message>
    <message>
        <source>Pattern</source>
        <translation type="obsolete">Texture</translation>
    </message>
    <message>
        <source>Pen Color</source>
        <translation type="obsolete">Contour du symbole</translation>
    </message>
    <message>
        <source>Fill Color</source>
        <translation type="obsolete">Remplissage</translation>
    </message>
    <message>
        <source>Size</source>
        <translation type="obsolete">Taille</translation>
    </message>
    <message>
        <source>Symbol</source>
        <translation type="obsolete">Symbole</translation>
    </message>
    <message>
        <source>Direction</source>
        <translation type="obsolete">Direction</translation>
    </message>
    <message>
        <source>Plus</source>
        <translation type="obsolete">Plus</translation>
    </message>
    <message>
        <source>Minus</source>
        <translation type="obsolete">Moins</translation>
    </message>
    <message>
        <source>&amp;X Error Bar</source>
        <translation type="obsolete">Barres d&apos;erreur en abscisses</translation>
    </message>
    <message>
        <source>Co&amp;lor</source>
        <translation type="obsolete">Cou&amp;leur</translation>
    </message>
    <message>
        <source>Line Width</source>
        <translation type="obsolete">Epaisseur de ligne</translation>
    </message>
    <message>
        <source>1</source>
        <translation type="obsolete">1</translation>
    </message>
    <message>
        <source>2</source>
        <translation type="obsolete">2</translation>
    </message>
    <message>
        <source>3</source>
        <translation type="obsolete">3</translation>
    </message>
    <message>
        <source>4</source>
        <translation type="obsolete">4</translation>
    </message>
    <message>
        <source>5</source>
        <translation type="obsolete">5</translation>
    </message>
    <message>
        <source>Cap Width</source>
        <translation type="obsolete">Largeur ???</translation>
    </message>
    <message>
        <source>8</source>
        <translation type="obsolete">8</translation>
    </message>
    <message>
        <source>10</source>
        <translation type="obsolete">10</translation>
    </message>
    <message>
        <source>12</source>
        <translation type="obsolete">12</translation>
    </message>
    <message>
        <source>16</source>
        <translation type="obsolete">16</translation>
    </message>
    <message>
        <source>20</source>
        <translation type="obsolete">20</translation>
    </message>
    <message>
        <source>Through Symbol</source>
        <translation type="obsolete">A travers le symbole</translation>
    </message>
    <message>
        <source>Automatic Binning</source>
        <translation type="obsolete">Échantillonage automatique</translation>
    </message>
    <message>
        <source>&amp;Show statistics</source>
        <translation type="obsolete">Afficher les &amp;Statistiques</translation>
    </message>
    <message>
        <source>Bin Size</source>
        <translation type="obsolete">Période d&apos;échantillonnage</translation>
    </message>
    <message>
        <source>Begin</source>
        <translation type="obsolete">Début</translation>
    </message>
    <message>
        <source>End</source>
        <translation type="obsolete">Fin</translation>
    </message>
    <message>
        <source>Histogram Data</source>
        <translation type="obsolete">Données de l&apos;Histogramme</translation>
    </message>
    <message>
        <source>Gap Between Bars (in %)</source>
        <translation type="obsolete">Ecart entre les barres (en %)</translation>
    </message>
    <message>
        <source>Spacing</source>
        <translation type="obsolete">Espacement</translation>
    </message>
    <message>
        <source>Arrowheads</source>
        <translation type="obsolete">Têtes des flêches</translation>
    </message>
    <message>
        <source>Length</source>
        <translation type="obsolete">Longueur</translation>
    </message>
    <message>
        <source>Angle</source>
        <translation type="obsolete">Angle</translation>
    </message>
    <message>
        <source>&amp;Filled</source>
        <translation type="obsolete">Pleines</translation>
    </message>
    <message>
        <source>End Point</source>
        <translation type="obsolete">Point Final</translation>
    </message>
    <message>
        <source>X End</source>
        <translation type="obsolete">Fin en X</translation>
    </message>
    <message>
        <source>Y End</source>
        <translation type="obsolete">Fin en Y</translation>
    </message>
    <message>
        <source>Vector</source>
        <translation type="obsolete">Vecteur</translation>
    </message>
    <message>
        <source>&amp;Edit Function...</source>
        <translation type="obsolete">Modifi&amp;er...</translation>
    </message>
    <message>
        <source>No line</source>
        <translation type="obsolete">Aucune ligne</translation>
    </message>
    <message>
        <source>Lines</source>
        <translation type="obsolete">Lignes</translation>
    </message>
    <message>
        <source>Sticks</source>
        <translation type="obsolete">Batons</translation>
    </message>
    <message>
        <source>Steps</source>
        <translation type="obsolete">Marches</translation>
    </message>
    <message>
        <source>Dots</source>
        <translation type="obsolete">Points</translation>
    </message>
    <message>
        <source>Spline</source>
        <translation type="obsolete">Interpolation</translation>
    </message>
    <message>
        <source>Fill area under curve</source>
        <translation type="obsolete">Remplir l&apos;aire sous la courbe</translation>
    </message>
    <message>
        <source>Ellipse</source>
        <translation type="obsolete">Ellipse</translation>
    </message>
    <message>
        <source>Rectangle</source>
        <translation type="obsolete">Rectangle</translation>
    </message>
    <message>
        <source>Diamond</source>
        <translation type="obsolete">Diamant</translation>
    </message>
    <message>
        <source>Up Triangle</source>
        <translation type="obsolete">Triangle /\</translation>
    </message>
    <message>
        <source>Down Triangle</source>
        <translation type="obsolete">Triangle \/</translation>
    </message>
    <message>
        <source>Left Triangle</source>
        <translation type="obsolete">Triangle &lt;</translation>
    </message>
    <message>
        <source>Right Triangle</source>
        <translation type="obsolete">Triangle &gt;</translation>
    </message>
    <message>
        <source>Cross</source>
        <translation type="obsolete">Croix +</translation>
    </message>
    <message>
        <source>Diagonal Cross</source>
        <translation type="obsolete">Croix x</translation>
    </message>
    <message>
        <source>Offset (in %)</source>
        <translation type="obsolete">Décalage (en %)</translation>
    </message>
    <message>
        <source>QtiPlot - Custom curves</source>
        <translation type="obsolete">QtiPlot - Courbes définies par l&apos;utilisateur</translation>
    </message>
    <message>
        <source>Pen</source>
        <translation type="obsolete">Stylo</translation>
    </message>
    <message>
        <source>&amp;Delete</source>
        <translation type="obsolete">&amp;Supprimer</translation>
    </message>
    <message>
        <source>&amp;Edit...</source>
        <translation type="obsolete">&amp;Edition...</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">QtiPlot - Erreur lors de l&apos;entrée des paramètres</translation>
    </message>
    <message>
        <source>Please enter a valid start limit!</source>
        <translation type="obsolete">Donnez une valeur  de départ correcte !</translation>
    </message>
    <message>
        <source>Please enter a valid end limit!</source>
        <translation type="obsolete">Donnez une valeur d&apos;arrêt correcte !</translation>
    </message>
    <message>
        <source>Please enter a valid bin size value!</source>
        <translation type="obsolete">Donnez une taille d&apos;échantillonnage valide !</translation>
    </message>
    <message>
        <source>Please enter limits that satisfy: begin &lt; end!</source>
        <translation type="obsolete">Veuillez entrer un domaine pour les abscisses tel que le début soit inférieur à la fin !</translation>
    </message>
    <message>
        <source>QtiPlot - Bin size input error</source>
        <translation type="obsolete">QtiPlot - Erreur de la taille des échantillons</translation>
    </message>
    <message>
        <source>Please enter a positive bin size value!</source>
        <translation type="obsolete">Donnez une valeur positive de la taille des échantillons !</translation>
    </message>
    <message>
        <source>Edge Color</source>
        <translation type="obsolete">Couleur du bord</translation>
    </message>
    <message>
        <source>Edge Width</source>
        <translation type="obsolete">Largeur du bord</translation>
    </message>
    <message>
        <source>Box</source>
        <translation type="obsolete">Boîte</translation>
    </message>
    <message>
        <source>Type</source>
        <translation type="obsolete">Type</translation>
    </message>
    <message>
        <source>No Box</source>
        <translation type="obsolete">Aucune boîte</translation>
    </message>
    <message>
        <source>Perc 10, 25, 75, 90</source>
        <translation type="obsolete">10, 25, 75, 90 %</translation>
    </message>
    <message>
        <source>Notch</source>
        <translation type="obsolete">Réjecteur</translation>
    </message>
    <message>
        <source>Range</source>
        <translation type="obsolete">Gamme</translation>
    </message>
    <message>
        <source>Standard Deviation</source>
        <translation type="obsolete">Ecart type</translation>
    </message>
    <message>
        <source>Standard Error</source>
        <translation type="obsolete">Erreur type</translation>
    </message>
    <message>
        <source>Perc 25, 75</source>
        <translation type="obsolete">25, 75 %</translation>
    </message>
    <message>
        <source>Perc 10, 90</source>
        <translation type="obsolete">10, 90 %</translation>
    </message>
    <message>
        <source>Perc 5, 95</source>
        <translation type="obsolete">5, 95 %</translation>
    </message>
    <message>
        <source>Perc 1, 99</source>
        <translation type="obsolete">1, 99 %</translation>
    </message>
    <message>
        <source>Max-Min</source>
        <translation type="obsolete">Max-Min</translation>
    </message>
    <message>
        <source>Constant</source>
        <translation type="obsolete">Constante</translation>
    </message>
    <message>
        <source>Percentile (%)</source>
        <translation type="obsolete">Pourcentage (%)</translation>
    </message>
    <message>
        <source>Coef</source>
        <translation type="obsolete">Coefficient</translation>
    </message>
    <message>
        <source>Box Width</source>
        <translation type="obsolete">Largeur de boîte</translation>
    </message>
    <message>
        <source>Whiskers</source>
        <translation type="obsolete">Whiskers</translation>
    </message>
    <message>
        <source>No Whiskers</source>
        <translation type="obsolete">Sans Whiskers</translation>
    </message>
    <message>
        <source>75-25</source>
        <translation type="obsolete">75-25</translation>
    </message>
    <message>
        <source>90-10</source>
        <translation type="obsolete">90-10</translation>
    </message>
    <message>
        <source>95-5</source>
        <translation type="obsolete">95-5</translation>
    </message>
    <message>
        <source>99-1</source>
        <translation type="obsolete">99-1</translation>
    </message>
    <message>
        <source>Box/Whiskers</source>
        <translation type="obsolete">Boîte / Whiskers</translation>
    </message>
    <message>
        <source>Max</source>
        <translation type="obsolete">Max</translation>
    </message>
    <message>
        <source>99%</source>
        <translation type="obsolete">99 %</translation>
    </message>
    <message>
        <source>Mean</source>
        <translation type="obsolete">Moyenne</translation>
    </message>
    <message>
        <source>1%</source>
        <translation type="obsolete">1 %</translation>
    </message>
    <message>
        <source>Min</source>
        <translation type="obsolete">Min</translation>
    </message>
    <message>
        <source>Percentile</source>
        <translation type="obsolete">Pourcentage</translation>
    </message>
    <message>
        <source>Position</source>
        <translation type="obsolete">Position</translation>
    </message>
    <message>
        <source>Tail</source>
        <translation type="obsolete">Queue</translation>
    </message>
    <message>
        <source>Middle</source>
        <translation type="obsolete">Milieu</translation>
    </message>
    <message>
        <source>Head</source>
        <translation type="obsolete">Tête</translation>
    </message>
    <message>
        <source>Vector XYAM</source>
        <translation type="obsolete">Vecteur XYAM</translation>
    </message>
    <message>
        <source>Vector Data</source>
        <translation type="obsolete">Vecteur Donnée</translation>
    </message>
    <message>
        <source>Magnitude</source>
        <translation type="obsolete">Amplitude</translation>
    </message>
    <message>
        <source>Attach curve to: </source>
        <translation type="obsolete">Associé à la courbe à : </translation>
    </message>
    <message>
        <source>x Axis</source>
        <translation type="obsolete">Axe X</translation>
    </message>
    <message>
        <source>Bottom</source>
        <translation type="obsolete">Inférieur</translation>
    </message>
    <message>
        <source>Top</source>
        <translation type="obsolete">Supérieur</translation>
    </message>
    <message>
        <source>y Axis</source>
        <translation type="obsolete">Axe Y</translation>
    </message>
    <message>
        <source>Left</source>
        <translation type="obsolete">Gauche</translation>
    </message>
    <message>
        <source>Right</source>
        <translation type="obsolete">Droite</translation>
    </message>
    <message>
        <source>Axes</source>
        <translation type="obsolete">Axes</translation>
    </message>
    <message>
        <source>Horizontal Steps</source>
        <translation type="obsolete">Marches horizontaux</translation>
    </message>
    <message>
        <source>Vertical Steps</source>
        <translation type="obsolete">Marches verticales</translation>
    </message>
    <message>
        <source>Image</source>
        <translation type="obsolete">Image</translation>
    </message>
    <message>
        <source>&amp;Gray Scale</source>
        <translation type="obsolete">Échelle de &amp;gris</translation>
    </message>
    <message>
        <source>&amp;Default Colors</source>
        <translation type="obsolete">Couleurs par &amp;défault</translation>
    </message>
    <message>
        <source>Custom Co&amp;lors</source>
        <translation type="obsolete">Couleurs personnalisées</translation>
    </message>
    <message>
        <source>Contour Lines</source>
        <translation type="obsolete">Lignes du contour</translation>
    </message>
    <message>
        <source>Levels</source>
        <translation type="obsolete">Niveaux</translation>
    </message>
    <message>
        <source>Use &amp;Color Map</source>
        <translation type="obsolete">Utiliser la &amp;carte des couleurs</translation>
    </message>
    <message>
        <source>Use Default &amp;Pen</source>
        <translation type="obsolete">Utiliser la crayon par défault</translation>
    </message>
    <message>
        <source>Color Bar Scale</source>
        <translation type="obsolete">Échelle des barres de couleurs</translation>
    </message>
    <message>
        <source>Axis</source>
        <translation type="obsolete">Axe</translation>
    </message>
    <message>
        <source>Contour</source>
        <translation type="obsolete">Contour</translation>
    </message>
    <message>
        <source>Colors</source>
        <translation type="obsolete">Couleurs</translation>
    </message>
</context>
<context>
    <name>plotWizard</name>
    <message>
        <source>Worksheet</source>
        <translation type="obsolete">Feuille de travail</translation>
    </message>
    <message>
        <source>QtiPlot - Select Columns to Plot</source>
        <translation type="obsolete">Qtiplot - Sélectionnez les colonnes à tracer</translation>
    </message>
    <message>
        <source>&amp;New curve</source>
        <translation type="obsolete">&amp;Nouvelle courbe</translation>
    </message>
    <message>
        <source>&amp;Delete curve</source>
        <translation type="obsolete">Supprimer une courbe</translation>
    </message>
    <message>
        <source>&amp;Plot</source>
        <translation type="obsolete">Tracer</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">Qtiplot - Avertissement</translation>
    </message>
    <message>
        <source>Redefinitions of the same curve are ignored!</source>
        <translation type="obsolete">Les redéfinitions de la même courbe sont ignorées !</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">Qtiplot - Erreur</translation>
    </message>
    <message>
        <source>You have allready defined a X column!</source>
        <translation type="obsolete">Vous avez déjà défini une colonne pour les X !</translation>
    </message>
    <message>
        <source>You must define a X column first!</source>
        <translation type="obsolete">Vous devez définir une colonne pour les X !</translation>
    </message>
    <message>
        <source>You have allready defined a Y column!</source>
        <translation type="obsolete">Vous avez déjà défini une colonne pour les Y !</translation>
    </message>
    <message>
        <source>This kind of curve is not handled by QtiPlot!</source>
        <translation type="obsolete">Ce type de courbe n&apos;est pas géré par Qtiplot !</translation>
    </message>
    <message>
        <source>You have allready defined a Z column!</source>
        <translation type="obsolete">Vous avez déjà défini une colonne pour les Z !</translation>
    </message>
    <message>
        <source>You must define a Y column first!</source>
        <translation type="obsolete">Vous devez définir une colonne pour les Y !</translation>
    </message>
    <message>
        <source>You have allready defined an error-bars column!</source>
        <translation type="obsolete">Vous avez déjà défini une colonne pour les barres d&apos;erreur !</translation>
    </message>
    <message>
        <source>You must add a new curve first!</source>
        <translation type="obsolete">Vous devez d&apos;abord définir une nouvelle courbe !</translation>
    </message>
</context>
<context>
    <name>polynomFitDialog</name>
    <message>
        <source>QtiPlot - Polynomial Fit Options</source>
        <translation type="obsolete">Qtiplot - Options pour l&apos;ajustement polynomial</translation>
    </message>
    <message>
        <source>Polynomial Fit of</source>
        <translation type="obsolete">Ajustement de</translation>
    </message>
    <message>
        <source>Order (1 - 9, 1 = linear)</source>
        <translation type="obsolete">Ordre (1 - 9, 1 = linéaire)</translation>
    </message>
    <message>
        <source>Fit curve # pts</source>
        <translation type="obsolete">Points</translation>
    </message>
    <message>
        <source>Fit curve Xmin</source>
        <translation type="obsolete">Xmin = </translation>
    </message>
    <message>
        <source>0</source>
        <translation type="obsolete">0</translation>
    </message>
    <message>
        <source>Fit curve Xmax</source>
        <translation type="obsolete">Xmax = </translation>
    </message>
    <message>
        <source>Show Formula on Graph?</source>
        <translation type="obsolete">Afficher la formule ?</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annule</translation>
    </message>
    <message>
        <source>&amp;Fit</source>
        <translation type="obsolete">&amp;Calculer</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">Fermer</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>Not enough points</source>
        <translation type="obsolete">Nombre de points insuffisants</translation>
    </message>
    <message>
        <source>You can not fit curve:</source>
        <translation type="obsolete">Vous ne pouvez pas ajuster l&apos;index :</translation>
    </message>
    <message>
        <source>because it has less than 2 points!</source>
        <translation type="obsolete">Parce qu&apos;il a moins de 2 points !</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>The curve &lt;b&gt; %1 &lt;/b&gt; doesn&apos;t exist anymore! Operation aborted!</source>
        <translation type="obsolete">La courbe &lt;b&gt; %1 &lt;/b&gt; n&apos;existe plus ! Opération annulée !</translation>
    </message>
    <message>
        <source>You cannot fit curve:</source>
        <translation type="obsolete">Vous ne pouvez pas ajuster la courbe :</translation>
    </message>
</context>
<context>
    <name>renameWindowDialog</name>
    <message>
        <source>QtiPlot - Rename Window</source>
        <translation type="obsolete">Qtiplot - Renommer la Fenêtre</translation>
    </message>
    <message>
        <source>Window Title</source>
        <translation type="obsolete">Titre de la fenêtre</translation>
    </message>
    <message>
        <source>&amp;Name (single word)</source>
        <translation type="obsolete">&amp;Nom (un seul mot)</translation>
    </message>
    <message>
        <source>&amp;Label</source>
        <translation type="obsolete">&amp;Etiquette</translation>
    </message>
    <message>
        <source>&amp;Both Name and Label</source>
        <translation type="obsolete">Nom et Etiquette</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">Qtiplot - Erreur</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>For internal consistency reasons the underscore character is replaced with a minus sign.</source>
        <translation type="obsolete">Pour des raisons d&apos;uniformité, le trait souligné (_) est remplacé par le signe moins (-).</translation>
    </message>
</context>
<context>
    <name>sDialog</name>
    <message>
        <source>QtiPlot - Define surface plot</source>
        <translation type="obsolete">Qtiplot - Définition d&apos;un graphe de surface</translation>
    </message>
    <message>
        <source>f(x,y)=</source>
        <translation type="obsolete">f(x,y) =</translation>
    </message>
    <message>
        <source>X - axis</source>
        <translation type="obsolete">Axe des X</translation>
    </message>
    <message>
        <source>From</source>
        <translation type="obsolete">De</translation>
    </message>
    <message>
        <source>-1</source>
        <translation type="obsolete">-1</translation>
    </message>
    <message>
        <source>To</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>1</source>
        <translation type="obsolete">1</translation>
    </message>
    <message>
        <source>Y - axis</source>
        <translation type="obsolete">Axe des Y</translation>
    </message>
    <message>
        <source>Z - axis</source>
        <translation type="obsolete">Axe des Z</translation>
    </message>
    <message>
        <source>Clear &amp;list</source>
        <translation type="obsolete">Effacer la &amp;liste</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - X Start limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de X initial erronée</translation>
    </message>
    <message>
        <source>QtiPlot - X End limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de X final erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Y Start limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de Y initial erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Y End limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de Y final erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Z Start limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de Z initial erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Z End limit error</source>
        <translation type="obsolete">Qtiplot - Valeur de Z final erronée</translation>
    </message>
    <message>
        <source>QtiPlot - Input error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée</translation>
    </message>
    <message>
        <source>Please enter limits that satisfy: from &lt; end!</source>
        <translation type="obsolete">Veuillez entrer un domaine pour les abscisses tel que le début soit inférieur à la fin !</translation>
    </message>
    <message>
        <source>QtiPlot - Input function error</source>
        <translation type="obsolete">Qtiplot - Fonction entrée incorrecte</translation>
    </message>
</context>
<context>
    <name>setColValuesDialog</name>
    <message>
        <source>QtiPlot - Set column values</source>
        <translation type="obsolete">Qtiplot - Propriétés de la colonne</translation>
    </message>
    <message>
        <source>For row (i)</source>
        <translation type="obsolete">Pour la rangée (i)</translation>
    </message>
    <message>
        <source>to</source>
        <translation type="obsolete">à</translation>
    </message>
    <message>
        <source>Add function</source>
        <translation type="obsolete">Ajouter la fonction</translation>
    </message>
    <message>
        <source>Add column</source>
        <translation type="obsolete">Ajouter la colonne</translation>
    </message>
    <message>
        <source>Add cell</source>
        <translation type="obsolete">Ajouter la cellule</translation>
    </message>
    <message>
        <source>OK</source>
        <translation type="obsolete">OK</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation type="obsolete">Appliquer</translation>
    </message>
    <message>
        <source>Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>QtiPlot - Input function error</source>
        <translation type="obsolete">Qtiplot - Erreur lors de l&apos;entrée de la fonction</translation>
    </message>
    <message>
        <source>You can not use imbricated columns!</source>
        <translation type="obsolete">Vous ne pouvez pas utilisez des colonnes imbriqués !</translation>
    </message>
</context>
<context>
    <name>smoothCurveDialog</name>
    <message>
        <source>QtiPlot - Smoothing Options</source>
        <translation type="obsolete">QtiPlot - Options de lissage</translation>
    </message>
    <message>
        <source>Curve</source>
        <translation type="obsolete">Courbe</translation>
    </message>
    <message>
        <source>Polynomial Order</source>
        <translation type="obsolete">Ordre</translation>
    </message>
    <message>
        <source>Points to the Left</source>
        <translation type="obsolete">Points à gauche</translation>
    </message>
    <message>
        <source>Points to the Right</source>
        <translation type="obsolete">Points à droite</translation>
    </message>
    <message>
        <source>Points</source>
        <translation type="obsolete">Points</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>&amp;Smooth</source>
        <translation type="obsolete">&amp;Calculer</translation>
    </message>
    <message>
        <source>&amp;Close</source>
        <translation type="obsolete">Fermer</translation>
    </message>
</context>
<context>
    <name>sortDialog</name>
    <message>
        <source>QtiPlot - Sorting Options</source>
        <translation type="obsolete">Qtiplot - Options pour le Tri</translation>
    </message>
    <message>
        <source>Sort columns</source>
        <translation type="obsolete">Trier les Colonnes</translation>
    </message>
    <message>
        <source>Order</source>
        <translation type="obsolete">Ordre</translation>
    </message>
    <message>
        <source>Leading column</source>
        <translation type="obsolete">Colonne triée</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Separately</source>
        <translation type="obsolete">Séparement</translation>
    </message>
    <message>
        <source>Together</source>
        <translation type="obsolete">Ensemble</translation>
    </message>
    <message>
        <source>Ascending</source>
        <translation type="obsolete">&amp;Croissant</translation>
    </message>
    <message>
        <source>Descending</source>
        <translation type="obsolete">&amp;Décroissant</translation>
    </message>
</context>
<context>
    <name>symbolDialog</name>
    <message>
        <source>QtiPlot - Choose Symbol</source>
        <translation type="obsolete">QtiPlot - Choisir le Symbole</translation>
    </message>
</context>
<context>
    <name>tableDialog</name>
    <message>
        <source>Enumerate all to the right</source>
        <translation type="obsolete">Énumérer les colonnes à partir de la droite</translation>
    </message>
    <message>
        <source>Apply</source>
        <translation type="obsolete">Appliquer</translation>
    </message>
    <message>
        <source>Options</source>
        <translation type="obsolete">Propriétés</translation>
    </message>
    <message>
        <source>Display</source>
        <translation type="obsolete">Affichage :</translation>
    </message>
    <message>
        <source>X (abscissae)</source>
        <translation type="obsolete">X (abscisses)</translation>
    </message>
    <message>
        <source>Y (ordinates)</source>
        <translation type="obsolete">Y (ordonnées)</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Aucun</translation>
    </message>
    <message>
        <source>Numeric</source>
        <translation type="obsolete">Numérique</translation>
    </message>
    <message>
        <source>Text</source>
        <translation type="obsolete">Texte</translation>
    </message>
    <message>
        <source>Date</source>
        <translation type="obsolete">Date</translation>
    </message>
    <message>
        <source>Time</source>
        <translation type="obsolete">Temps</translation>
    </message>
    <message>
        <source>Month</source>
        <translation type="obsolete">Mois</translation>
    </message>
    <message>
        <source>Day of Week</source>
        <translation type="obsolete">Jour de la semaine</translation>
    </message>
    <message>
        <source>Apply to all columns to the right</source>
        <translation type="obsolete">Appliquer à toutes les colonnes vers la droite</translation>
    </message>
    <message>
        <source>Decimal: 1000</source>
        <translation type="obsolete">Décimal : 1000</translation>
    </message>
    <message>
        <source>Scientific: 1E3</source>
        <translation type="obsolete">Scientifique : 1E3</translation>
    </message>
    <message>
        <source>yyyy-MM-dd</source>
        <translation type="obsolete">aaaa-MM-jj</translation>
    </message>
    <message>
        <source>dd.MM.yyyy</source>
        <translation type="obsolete">jj.MM.aaaa</translation>
    </message>
    <message>
        <source>ddd MMMM d yy</source>
        <translation type="obsolete">jjj MMMM j aa</translation>
    </message>
    <message>
        <source>dd/MM/yyyy</source>
        <translation type="obsolete">jj/MM/aaaa</translation>
    </message>
    <message>
        <source>h</source>
        <translation type="obsolete">h</translation>
    </message>
    <message>
        <source>h ap</source>
        <translation type="obsolete">h ap</translation>
    </message>
    <message>
        <source>h AP</source>
        <translation type="obsolete">h AP</translation>
    </message>
    <message>
        <source>h:mm</source>
        <translation type="obsolete">h:mm</translation>
    </message>
    <message>
        <source>h:mm ap</source>
        <translation type="obsolete">h:mm ap</translation>
    </message>
    <message>
        <source>hh:mm</source>
        <translation type="obsolete">hh:mm</translation>
    </message>
    <message>
        <source>h:mm:ss</source>
        <translation type="obsolete">h:mm:ss</translation>
    </message>
    <message>
        <source>h:mm:ss.zzz</source>
        <translation type="obsolete">h:mm:ss.mmm</translation>
    </message>
    <message>
        <source>mm:ss</source>
        <translation type="obsolete">mm:ss</translation>
    </message>
    <message>
        <source>mm:ss.zzz</source>
        <translation type="obsolete">mm:ss.mmm</translation>
    </message>
    <message>
        <source>hmm</source>
        <translation type="obsolete">hmm</translation>
    </message>
    <message>
        <source>hmmss</source>
        <translation type="obsolete">hmmss</translation>
    </message>
    <message>
        <source>hhmmss</source>
        <translation type="obsolete">hhmmss</translation>
    </message>
    <message>
        <source>QtiPlot - Column options</source>
        <translation type="obsolete">QtiPlot - Propriétés de la colonne</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>Default</source>
        <translation type="obsolete">Par défaut</translation>
    </message>
    <message>
        <source>Set Decimal Places=</source>
        <translation type="obsolete">Nombre de Décimales</translation>
    </message>
    <message>
        <source>Apply to all</source>
        <translation type="obsolete">Appliquer à toutes</translation>
    </message>
    <message>
        <source>Column Name:</source>
        <translation type="obsolete">Nom de colonne :</translation>
    </message>
    <message>
        <source>Plot Designation:</source>
        <translation type="obsolete">Nom du graphe :</translation>
    </message>
    <message>
        <source>Format:</source>
        <translation type="obsolete">Format :</translation>
    </message>
    <message>
        <source>Numeric Display:</source>
        <translation type="obsolete">Affichage des Nombres :</translation>
    </message>
    <message>
        <source>Column Width:</source>
        <translation type="obsolete">largeur de colonne :</translation>
    </message>
    <message>
        <source>Comment:</source>
        <translation type="obsolete">Commentaire :</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>Precision:</source>
        <translation type="obsolete">Précision :</translation>
    </message>
    <message>
        <source>Z (height)</source>
        <translation type="obsolete">Z (hauteur)</translation>
    </message>
    <message>
        <source>QtiPlot - Error</source>
        <translation type="obsolete">QtiPlot - Erreur</translation>
    </message>
    <message>
        <source>The column names must only contain letters and digits!</source>
        <translation type="obsolete">Les noms de colonnes doivent seulement contenir des lettres et des chiffres !</translation>
    </message>
    <message>
        <source>X Error</source>
        <translation type="obsolete">Erreur en X</translation>
    </message>
    <message>
        <source>Y Error</source>
        <translation type="obsolete">Erreur en Y</translation>
    </message>
    <message>
        <source>QtiPlot - Warning</source>
        <translation type="obsolete">QtiPlot - Avertissement</translation>
    </message>
    <message>
        <source>For internal consistency reasons the underscore character is replaced with a minus sign.</source>
        <translation type="obsolete">Pour des raisons d&apos;uniformité, le trait souligné (_) est remplacé par le signe moins (-).</translation>
    </message>
</context>
<context>
    <name>textDialog</name>
    <message>
        <source>QtiPlot - Text Dialog</source>
        <translation type="obsolete">QtiPlot - Propriétés du Texte</translation>
    </message>
    <message>
        <source>Title Color</source>
        <translation type="obsolete">Couleur du titre</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>Title Font</source>
        <translation type="obsolete">Police du titre</translation>
    </message>
    <message>
        <source>&amp;Font</source>
        <translation type="obsolete">Modifier</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>Alignement</source>
        <translation type="obsolete">Alignement</translation>
    </message>
    <message>
        <source>Center</source>
        <translation type="obsolete">Centré</translation>
    </message>
    <message>
        <source>Left</source>
        <translation type="obsolete">Gauche</translation>
    </message>
    <message>
        <source>Right</source>
        <translation type="obsolete">Droite</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Co&amp;lor</source>
        <translation type="obsolete">Modifier</translation>
    </message>
</context>
<context>
    <name>textDlg</name>
    <message>
        <source>QtiPlot - Text options</source>
        <translation type="obsolete">QtiPlot - Options du Texte</translation>
    </message>
    <message>
        <source>Color</source>
        <translation type="obsolete">Couleur</translation>
    </message>
    <message>
        <source>&amp;OK</source>
        <translation type="obsolete">&amp;OK</translation>
    </message>
    <message>
        <source>Background</source>
        <translation type="obsolete">Arrière Plan</translation>
    </message>
    <message>
        <source>None</source>
        <translation type="obsolete">Aucun</translation>
    </message>
    <message>
        <source>Rectangle</source>
        <translation type="obsolete">Rectangle</translation>
    </message>
    <message>
        <source>Shadow</source>
        <translation type="obsolete">Ombré</translation>
    </message>
    <message>
        <source>&amp;Apply</source>
        <translation type="obsolete">&amp;Appliquer</translation>
    </message>
    <message>
        <source>&amp;Font</source>
        <translation type="obsolete">&amp;Police</translation>
    </message>
    <message>
        <source>&amp;Cancel</source>
        <translation type="obsolete">&amp;Annuler</translation>
    </message>
    <message>
        <source>Rotate (deg.)</source>
        <translation type="obsolete">Rotation (deg.)</translation>
    </message>
    <message>
        <source>0</source>
        <translation type="obsolete">0</translation>
    </message>
    <message>
        <source>45</source>
        <translation type="obsolete">45</translation>
    </message>
    <message>
        <source>90</source>
        <translation type="obsolete">90</translation>
    </message>
    <message>
        <source>135</source>
        <translation type="obsolete">135</translation>
    </message>
    <message>
        <source>180</source>
        <translation type="obsolete">180</translation>
    </message>
    <message>
        <source>225</source>
        <translation type="obsolete">225</translation>
    </message>
    <message>
        <source>270</source>
        <translation type="obsolete">270</translation>
    </message>
    <message>
        <source>315</source>
        <translation type="obsolete">315</translation>
    </message>
    <message>
        <source>Co&amp;lor</source>
        <translation type="obsolete">Cou&amp;leur</translation>
    </message>
    <message>
        <source>Frame</source>
        <translation type="obsolete">Cadre</translation>
    </message>
    <message>
        <source>Font</source>
        <translation type="obsolete">Police</translation>
    </message>
    <message>
        <source>&amp;Background</source>
        <translation type="obsolete">&amp;Arrière Plan</translation>
    </message>
</context>
</TS>
